Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹8.5 LAdmitted-Finance | +0.10% | ₹8.5 L | L1 | Admitted-Finance |
| 2 | L2₹8.8 LAdmitted-Finance | +4.00% | ₹8.8 L | L2 | Admitted-Finance |
| 3 | Rejected-Technical 223 02 WARD NO 10 A DHURI DISTT SANGRUR | DHURI | SANGRUR | PUNJAB | - | - | - | Rejected-Technical Non Responsive |
| 4 | Rejected-Technical | - | - | - | Rejected-Technical Non Responsive |
Tender Value
₹8.5 L
EMD Value
₹16,999
Closing Date
10 Apr 2026, 12:00 pmClosed
Executive Engineer PHED Dist. Rural Division Ist J
Executive Engineer PHED Dist. Rural Division Ist Jaipur
REPLACEMENT OF SUBMERSIBLE PUMP SETS, FEEDER PANEL BORD, GI PIPE, HDPE PIPE LINE AND SUBMERSIBLE CABLE AT RWSS KOTKHAWADA UNDER SUB DN. KOTKHAWADA
2026_PHCJA_549555_1
NIT No. - 06/2026-27
Open Tender
Civil Works - Water Works
90 days
As Per Tender
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Executive Engineer PHED Dist. Rural Division Ist
₹16,999
Yes
15 Apr 2026
2 Apr 2026
10 Apr 2026
2 Apr 2026
10 Apr 2026
2 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing, lowering, laying and jointing in trenches, standard lengths HDPF ISI marked Pipes as per 15-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes, transportation and freight charges, inspection charges, loading/unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work). Note: Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of theitem and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M. | |||||
| 1.01 | HDPE PE-80 PN-6 | - | - | - | - |
| 1.02 | 90 mm dia | - | RMT | - | - |
| 2Earth work in excavation by mechanical means (Hydraulic Excavator )/manual means in trenches of required width and gradient for laying and jointing of pipeline including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the xcavated soil, and then returning the soil as required in layers ot exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisionsetc.: All kinds of soil | |||||
| 3Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less hody passage of approved make of following Pressurc rating & dia complele, confirming to IS:14846 )mmanpeр up to date) and of following specifications: Body, Bonnet. Wedge, Gland, Thrust Plate. Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes -1LTB2/ SS, Face to face dimensions as per IS 14846/2000 (amended up to datc) ,Epoxy (Non-Toxicsuitable for drinking water) applied inside and outside. Flanges Drilled as per 15 1538. Nut-Bolt confirming to 1S:1363 and IS: 1367/ CS/ galvanised steel Insertion rubber of black EPDM 6mm thick Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Speeifications and as per direction of Engincer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work | |||||
| 3.01 | Manually Operated CI Sluice valve of Class PN-1.0 | - | - | - | - |
| 3.02 | 80 mm dia | - | EACH | - | - |
| 3.03 | 100 mm dia | - | EACH | - | - |
| 3.04 | 125 mm dia | - | EACH | - | - |
| 4Dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces ot exceeding 0.02 cum in volum plume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. | |||||
stage.html
html • 0.03 MB
technical_979690.pdf
techsummary_979690.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
Tender.pdf
Tender Documents • 5.50 MB
BOQ_979690.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid