Modification of Electrical Panel Room and Miscellaneous Civil works at Office Area and Quarters and Guest House at GOAL, Mount Abu, Rajasthan.

Amount

From 0.00 to 1.50 m depth from Average Ground Level

Extra for every additional depth of 1.50 m or part thereof in Hard rock

Lead charges for Soil for lead Exceeding 3 KM but not exceeding 4 KM, by mechanical transport including loading, unloading, stacking / levelling etc. Note: The rate for this item is applicable for the net quantity arrived at after making deductions for voids @ 20% in respect of Soil from the truck measurement for payment.

Providing and laying in position cement concrete of 1:3:6/ M-10 with minimum cement content 220 Kg/Cum (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels.

Providng and fixing at and near ground level precast cement concrete 1:2:4 in kerbs, edgings etc. as per approved patterns and setting in position with C.M 1:3 (using crushed sand) including consolidation, curing, cost of required centering, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (using crushed sand) on exposed surfaces complete as per specifications and as directed by the Engineer-in-charge

Providing and laying in position cement concrete of 1:2:4/ M-15 with minimum cement content 320 Kg/Cum (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels

Providing and laying in position cement concrete of 1:1.5:3/M-20 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc.. complete as per specifications and drawings but excluding the cost of shuttering, centering and steel reinforcement.

Cutting and felling trees of girth beyond 120 cm girth up to and including 240 cm girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable materials complete as per specifications and as directed by the Engineer-in-charge. Necessary permission may be taken by the Dept.

Supplying and injecting with approved quality chemical emulsion at the rates and concentrations as per IS 6313-2001 Part II for post Anti-termite treatment to existing buildings as per manufacturers specifications and as directed by the Engineer-in-Charge. Work to be executed by approved agency and specified guarantee for 7 (Seven) years shall be furnished by the tenderer. Payment will be cleared only after submission of guarantee.

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel Supplied by the Contractor. "Using TMT bars of specified grades all dia. bars TMT bars to be supplied by the contractor, confirming to IS 1786. All test reports to be provided along with the supply of the materials." Note :1. The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also testing third party from approved laboratories with out any extra cost.2. Binding wire required for the work will have to be supplied by the contractor at their own cost and will not be measured for paymet. 3. Cover blocks shall be of same grade of concrete.

Providing, centering, shuttering Form work using steel plates, timber planks for all types of structures including necessary strutting, proping, staging, supports, bracings etc. and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels For Sub Structure

Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.

Extra for RCC/PCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants .

Providing and fixing in position 25 mm thick Joint filler board of approved make in expansion joints to the required size and shape, placing and keeping in position complete as per specifications and drawings and as directed by the Engineer in charge.

Providing and Fixing Anchor Fastner of approved make including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings. 16 MM diameter 200 mm Long

Providing and constructing Half brick masonry using bricks of approved quality / class, brand/ make in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications and as directed by the Engineer-in-charge but excluding reinforcement up to plinth level. (Reinforcement will be paid under relevant item)

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge. Up to and including 300 mm Joists, 350 mm channels, and below sections Using materials confirming to IS 2062. All test reports to be provided along with the supply of the materials.

Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Using materials confirming to IS 2062. All test reports to be provided along with the supply of the materials.

Providing and fixing hand rail using 304 grade Stainless Steel pipes of approved size and make and quality by welding, mirror / matt polishing, fixing at site etc. for balcony railing & staircases railing including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge

Providing and fixing at all levels MS bolts including nuts and washers of approved size, quality and make as per requirements and as per specifications, drawings complete all as directed at site by the Engineer in charge

Provding and constructing brick work in Cement mortar using standard bricks of approved class/ quality, make or brand in foundation and plinth including curing, raking out joints, simultaneous pointing below plinth level if specified, complete as per drawings, specifications and as directed by the Engineer-in-charge. Brick work in C.M 1:4 using crushed sand.

Providing and constructing Random Rubble masonry using approved Rubble stone in foundation and plinth in C.M 1:6 (using crushed sand) including raking out joints or simultaneous flush pointing below ground level / plinth level, curing etc. complete as per drawings and specifications.

Supplying, cutting to shape and fixing specified diameter UPVC pipes as per IS 4985 in RR Masonry/ RCC walls for weep holes complete all as per drawings and as specified at site. 110 mm dia UPVC Pipes

Providing 15 mm thick Internal plaster in cement mortar 1:4 without cement punning (using Crushed Sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.

Providing Raised and cut pointing on stone with cement moratr 1:3 using crushed sand as per specifications and as directed at site by the Engineer-in-charge.

Providing and laying chequered / patterned tiles 300 X 300 mm X 30 mm thick or equivalent size whatever approved by EIC of approved make including levelling, curing, finisihing and cleaning etc. complete to obtain required finish complete on 20 mm thick bed of cement mortar 1:4 (using crushed sand) as per specifications and drawings complete as directed by the Engineer-in-charge

Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge

Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge

Lead charges for Debris for lead Exceeding 3 KM but not exceeding 4 KM, by mechanical transport including loading, unloading, stacking / levelling etc. Note: The rate for this item is applicable for the net quantity arrived at after making deductions for voids @ 30% in respect of Debris from the truck measurement for payment.

Providing and laying design mix cement concrete of M-30 grade in roads, taxi tracks and runways using crushed Sand, graded stone aggregate of 20 mm nominal size in appropriate proportions as per specified design criteria approved by Engineer-in-charge, mechanically vibrated using needle / Surface vibrators including steel form work with sturdy M-S channel sections including curing and providing and filling construction joints and dummy joints with approved joint filler primer or equivalent including rounding of the edges and filling the grooves 10 x 25 mm deep at top for construction joints and 10 mm x 50 mm deep at top for dummy joints with joint sealing compound (conforming to grade B of IS:1834) including making necessary arrangements for expansion joints etc all complete as directed by the Engineer-in-charge

Providing SFMC Micro concrete for Structural members strengthening works including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-Charge Using 100% SFMC. 1.Protective coat to reinforcement and bond coat over adjacent concrete surface are included in the item.2.Formwork shall be measured and paid under relevant item.

Providing and laying in position bitumen hot sealing compound for expansion joints using approved make.

Providing and supplying Forklifts 03MT capacity for the collection and transportation of scrap items, unserviceable equipments, from various location inside BARC Trombay, Mumbaias instructed by Engineer Incharge.

Supplying man power along with necessary spades, shovels, punjas, ropes, small special spades, rain coats, broom, mop etc, minimum two labours per day and maximum any number of labour as and when decided by Engineer Incharge to work for eight hours per day to carry out the cleaning work, loading work etc as directed by Engineer Incharge.

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)

Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for colour anodizing

Providing and fixing of good quality equivalent Sliding Window Roller Double Wheel as per requirement with necessary screws etc. complete. as per specifications and as directed by the Engineer-in-Charge

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear float glass panes of 4.0 mm thickness

With clear float glass panes of 5.00 mm thickness

Providing and fixing film of specified colour & stroode strips of approved width Garware or equivalent approved make on glass doors or similar smooth surfaces as per manufacturers specifications and shown in drawing and as specified

Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width

Providng and fixing Aluminium Grill 10 mm thick in natural Silver anodising of min 15 Microns with a opening size of 80 mm x 66 mm and Minimum weight of 3.13 Kg/ Sq.M including providing and fixing Suitable section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-Charge .Aluminium alloy shall be of 6063-T6 with Yield strength of minimum 6.5 kg/ sq.mm. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Deco Grille make - Model - DG 102

Extra for providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge.

Providing and fixing locks for aluminium sliding window shutters with approved make (Over all size of 204mm x 23 mm) or approved equivalent quality, make, type all as per specifications complete as directed by the Engineer-in-charge. Note : Tentative / suggested make for guidance of bidder(s) : "GEETAVIN" as per cat. No. SS-004

Providing and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws 35 mm thick panelled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws.

Providing and fixing aluminium aldrops of size 250 X 16 mm ISI marked anodised transparent or dyed to requried colour or shade with necessary screws, bolting from rear side complete as per specifications and as directed by the Engineer-in-charge

Providing and fixing anodised aluminium tower bolts of size 250 X 12 mm ISI marked of approved make, transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.

Providing and fixing aluminium hanging heavy quality floor door stopper ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.

Providing and Painting with 1st quality acrylic washable distemper (ready made) with Two coats on new work of approved make and manufacturer and of required shade and colour, including scaffolding, preparation of the surfaces ,etc., including a coat of approved cement primer.as per manufacturer's specifications and as directed by the Engineer-in-charge.

Providing, painting, finishing walls with two coats of anti-algae, weather proof acrylic smooth emulusion paint of approved make with silicon additives on sand face plaster/ plain plaster & concrete surfaes of required shade over new work over a base coat of exterior cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing and painting over wooden surfaces with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade with two coats on new work excluding wood primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made with strong vibratory compaction and approved size, shape, design laid in required colour and pattern over and including 50 mm thick compacted bed of crushed sand, filling the joints with crushed sand etc. all complete as -per the direction of the Engineer-in-charge

Providing and fixing precoated Galvalume Roofing profile sheets of approved size, shape and pitch up to and including single length of 12.00 met. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 X 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-in-charge. Galvalume sheet roofing 0.50 mm Thickness in Single sheet

Providing and Fixing Anchor Fastner of approved make including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings. 16 MM diameter 200 mm Long

Providing, laying , jointing, fixing and testing heavy quality ( (ISI Marked C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint, all as directed by the Engineer-in-charge. Pipes with ISI marked 'C' -Class heavy quality pipes of approved make.

15 mm dia G.I pipe

50 mm Dia G I Pipe

Providing and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge. 15 mm dia bib cock of approved type and make .

Providing and fixing C.P Brass open stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge. 15 mm n.b CP Brass open stop cock of approved make and type

Providing, laying to the slope specified and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the order of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete excluding excavation and refilling which will be paid under relevent Item 100 mm diameter stoneware pipe

Providing and fixing square mouth S.W. gully trap complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size gully trap "P" type

Providing and laying non pressure NP2 class RCC Hume pipes of approved make, with collars jointed with stiff mixture of cement mortar in the proportion of 1:2, laying to the levels, slopes and as per the drawings and specifications and as directed by the Engineer-in-charge including testing of joints etc. complete. 150 mm Dia RCC Hume pipe class Np2

Supplying and fixing Cast Iron Man hole or Cast Iron Steps cover of approved make and weight as specified in the drawings or as directed by the Engineer in charge.

Providing and fixing heavy quality stainless steel / C.P brass grating of approved equvalent make as specified for floor traps / nahani traps all as directed by the Engineer-in-charge SS grating 125 mm dia

Providing and fixing viterious China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge White vitreous China wash basin size 630 x4 450 mm and equivalent sizes with single 15 mm C.P. brass pillar tap

Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge .

Providing and fixing C.P brass towel rail of approved make 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge.

Supplying & installing SS wire-mesh/Mosquito net to shutters of windows with necessary SS screws, beading of aluminium and cut the surplus SS wire mesh and make it smooth in functional point of view etc all complete as per approved shop drawings and specifications or directed by Project Engineer.

Providing and fixing 15-17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Telephone Black colour for kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels

Marble stone flooring with 15-17 mm thick marble slabs over 20 mm thick base of cement mortar 1:4 (using crushed sand) laid and placed with grey cement slurry including filling the joints with matching white cement slurry rubbing and polishing complete all as per specifications, drawings and as directed by the Engineer-in-charge

Using Makrana white second quality marble 18 mm thick using crushed sand

Using Udaipur Green marble 18 mm thick using crushed sand

Providing and laying minimum 25 mm thick uniform shade Kotah stone flooring over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtain mirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete.

Providing, hoisting and installing at required elevation moulded HDPE cylindrical vertical water storage tanks of approved make of the following capacities with suitable S. M. C cover at top including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow, providing and fixing necessary G.I Nipples ranging from 15 mm to 50 nn n.b of average150 mm length with double check nuts, washers etc. complete as directed by the Engineer-in-charge HDPE CYLINDRICAL vertical storage water tank 1000 lit capacity

Providing and grouting the joints of rubble stone pitching with cement mortar 1:3 and pointing the surfaces as directed complete as directed by the Engineer-in-charge

Providing and fixing dry stone pitching 22.5 cm thick laid in required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete as directed by the Engineer-in-charge

Providing and fixing 75 mm thick Non Asbestos Fiber Reinforced Aerated Cement Sandwich wall panels of minimum bulk density of 876 kg/cum of approved manufacturers , made out of Light Weight Fiber Reinforced Aerated Cement Concrete Core Composed of Portland Cement, Fly Ash Binders Etc. and 4 to 5 mm thick Non Asbestos Fiber Cement Boards on either Side of the Core having a Tongue and Groove on Longitudinal side of the Modules . These panel Modules are Erected / Installed using Galvanised Iron Steel Tracks of suitable section as per manufacturers specification at bottom and Top of the Wall respectively Including all Necessary Material Required for Erecting and Fixing the Wall Panel Complete as per the Direction of the Engineer in Charge. For Permanent and Exterior Joints the Paste of Sodium Silicate and Fly Ash / Cement to be Applied at Tongue and Groove Interlocking Joints and on Exposed Joints with Acrylic Putty and Fiber Tape on Both Side all as per design, drawing and specification and as directed by Engineer-in-Charge. (Structural steel used for support if any required shall be paid in relevant item) Note: Necessary cut-outs for Doors & Windows shall be made in the wall paneling. The rate shall be inclusive of all materials & Labour required for making cut-outs and additional GI channel frame work. No deductions will be made for the cut-outs for measurement purpose.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge

Providing and laying Self levelling Epoxy flooring , including preparation of the surface, primer coat,screeding & levelling coat and finishing coat with Polyurethene coat of approved colour and shade of approved make all as per manufacturers specifications complete as directed at site by the Engineer-in-charge (This Job to be carried out through a specialized approved agency) 2 mm thickness

Providing, supplying and laying pre polished granite slab flooring / dado / Wall cladding with 15-17 mm thick granite slabs over 20 mm thick base cement mortar 1:4 (using crushed sand) laid and placed with grey cement slurry including filling the joints with matching white cement based tile grout complete all as per specifications and drawings. Using approved black shade

Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge.The elevational area of the scaffolding shall be measured for payment purposes. "The payment shall be made once irrespective of duration and movement of scaffolding."

Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge Second class teak wood

Providing and fixing concertina barbed tape coil of follwoing dia. made from M.S galvanized ribbon tape of 0.5 mm thickness, 19 mm width stretching the coil to 9 m approximate, fixing the coil with clips between "Y" armed and MS angle posts 2.44 m high from ground level, including supplying and fixing MS galvanized clips etc. complete as per manufacturer's specification and including painting by dipping method the concrtina tape coil with two coats of synthetic enamel paint of approved shade and make over a coat of approved primer at fabrication shop, before bringing the material to the site and fixing in position etc. complete as directed by the Engineer-in-charge. 600/ 610 mm Dia Concertina coils

Fencing with RCC post placed at required distance, embedded in cement concrete blocks every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire 9.38 kg per 100 metres (min) between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post etc. complete as directed by the Engineer-in-charge. (cost of RCC posts, struts, earth work and concrete to be paid for separetely) : Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire 12 swg

Providing and fixing GI chain link fabric fencing Made of GI wire of dia 4 mm of required width in mesh size 50 x 50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as requeid complete as per direction of Engineer-in-charge.

Providing and repairing to external plaster in cement mortar 1:4 (using river sand) of thickness 12 mm to 20 mm in patches of area up to 2.5 sq metres including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls ncluding admixtured with approved Water proofing compound @ 2% by weight of cement used and as per manufacturer's specifications, sieving of sand to required fineness complete including disposal of rubbish to the dumping ground within 50 metres lead

Removing glass panes including removing damaged glass and replacing with new glass, including putty and nails wherever necessary in wooden partitions / wooden doors Plain float glass panes of thickness 4 mm

Removing the damaged G.M Gate Valve, Providing and fixing New GM Gate valves of approved make with handle wheels as per IS: 778 50 mm n.b

Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50 X 50 X 50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 crushed sand) and making good the wall etc. complete For 75 Dia Pipe

Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50 X 50 X 50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 crushed sand) and making good the wall etc. complete For 100 Dia Pipe

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams

Providing, supplying and fixing customized decorative film / wall paper of approved design and pattern (As specified by Architect) on wall face with necessary adhesive on Concrete surface / plaster surface /tile surface / Metal Surface etc. all complete as per the direction of EIC. (Sample and make should be got approved by Architect before use).

Providing and applying varnishing on wooden surfaces, Two coats of glue sizing with approved make varnish over an under coat of flatting varnish with varnish of approved brand and manufacturer including preparation of the surface by sand paper and filling the inherrant holes with wood filler and two finish coats to get required finishing all as directed by Engineer-in-charge.

Removing white or colour wash, distemper, external paint/ any paint by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as directed at site including scaffolding, cleaning of the areas.

Providing, Painting on old work (one coat) with oil bound washable distemper/ emamel paint of approved brand and manufacturer to give an even shade including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and laying (IPS Flooring) cement concrete flooring 1:2:4, using crushed sand 50 mm thick finished smooth to the required level, finishing with a floating coat of neat cement including cement slurry, providing and fixing 25 X 3 mm aluminium strip, curing, cleaning the surface neatly at the time of handing over the area complete as per specifications and drawings as directed by the Engineer in charge

Design, fabrication, supply and installation of frameless Facade using clear, toughened float glass of specified thickness for fixed glazing and openable panels (doors) with crystal edge polish and necessary patch fittings for swing doors, hunged on floor spring, , S. S. handles and locking arrangement and clear toughened float glass fixed for fins and all joints sealed with weather silicone sealent and fixed portion glass from top sides and bottom with anodised (minimum thickness 25 microns) Aluminium 'C' channels (25 mm X 25 mm X 1.5mm thick) and all glass to glass joints sealed with clear thick weather silicone sealent and making the required grooves in plaster/concrete for fixing channels etc and making good the same with sealent / plaster of paris etc. complete all as per approved shop drawings, specifications and as directed by Engineer-in-charge. (Shop drawings to be prepared by the contrator as per the site conditions and the same shall be got approved by Engineer in charge before procurement.) Note :Tentative / suggested make of fittings like patch fittings, floor springs, SS handle etc. for guidance of bidder(s) : DORMA PT range

Frameless fixed panels using 12mm thick clear toughened float glass including making cut outs, finishing the edges sealents etc complete. Glass area alone shall be measured and paid (necessary patch fittings shall be paid under relevant Item) Note :Tentative / suggested make of fittings like patch fittings, floor springs, SS handle etc. for guidance of bidder(s) : DORMA PT range

Frameless openable panels (swing doors) using 12mm thick for door leaves with the required patch fittings, with BTS-80 floor spring, 1200mm long Stainless Steel H type handles, corner Lock with strike plate and cylinder (approx. Size of each leaf of door max 1.5m X 2.40m). Note :Tentative / suggested make of fittings like patch fittings, floor springs, SS handle etc. for guidance of bidder(s) : DORMA PT range

Providing and Fixing in position Suspended false ceiling system using 600 x 600mm Calcium Silicate Ceiling tiles having 15mm densified edges and 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC and approvred surface design and edge profile (TEGULAR/ SPINTONE) placed in a suspended grid of size of 600 x 600mm made of hot-dipped G.I steel sections having an exposed surface capping of pre-finished baked polyester painted coil wherein the main tee of size 24mm x 38mm x 0.33mm shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wire with necessary level adjusters and cross tees of size 24 x 28 x 0.33mm x 1200 mm shall be inserted in to slots between the main tees at 600mm centres and thereafter in direction vertical to the longer tees, cross tees of size 24 x 28 x 0.33mm x 600mm shall be inserted to form a grid size of 600 x 600 mm resting on the perifery walls on wall angles of size 20mm x 20mm x 3000 mm x 0.40 mm thickness. The rate shall include providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings. The work shall be carried out as per directions of Engineer-in-charge. The main tees to be suspended from the ceiling/ soffit with the help of matal dash fastners of 6mmx50mm, soffit clits of 25mmx35xxx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips. the entire grid system shall be designed to bear a distributed load of minimum 15 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment) False Ceiling- tiles- Cosmos / Spintone / Hexa / Quadra Models Note : Tentative / suggested make for guidance of bidder(s) : AEROLITE False Ceiling System.

Providing and fixing SWR/PVC rain water pipes conforming to relevant IS type B and PVC SWR fittings & specials conforming to relevant IS including jointing with seal ring / With PVC solvent adhesive including fixing in walls using clamps etc complete all as per drawings, specifications and as directed by the Engineer-in-charge SWR PIPE 90 mm O/D

Providing Chemical based water proofing of modified acrylic emulsion Polymer and Elasomeric waterproofing coating of "M/s. INDOFIL"- MC-76 or equivalent product meeting technical parameter / specification over terrace slab/ parapet/ side walls etc. at all elevations including polycon based fibrous net complete including cleaning and preparation of surface and testing by ponding water complete with following operations: 1. Removing of all loose materials by wiremesh and clean entire terrrace with clean water by using water jet wherever required. 2.Open all visible crack by plaster cutting machine in "V" shape, 3. Dilute Indifil binder with water in the Ratio of 1:4 and pour on the bare slab to be treated, 4. Apply Indfofil binder and cement in the ratio of 1:1 and water to obtain paste like consistancy and fill the cracks. 5.Apply Indofil bond coat of INDOFIL binder and cement in the ratio of 1:1 to entire terrace. 6. First coat of INDOFIL binder & cement at the rate of 1.48sq.m per litre of Indofil. 7.Lay polycon based firous net (polester geotextile of minimum 80 GSM) for entire area immediately before drying of first coat to get proper bonding. 8. Apply one miore coat of INDOFIL binder & cement above fibre net. 9. Apply 2 coats of INDOFIL- FlexCote -WP @ 2.40 Sq.M per litre with dilution 10% weight of potable water, 10.Test the surface for water tightness. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Indofil - MC76

Providing and laying 3 courses of water proofing treatment with bitumen felt cover roofs consisting of first and third courses of blown bitumen 85 / 25 or 90 / 15 confirming to IS 702 applied hot @ 1.45 kg / Sq.M of area for each course, second course of roofing felt type - 3 Grade - 1 ("Hessian based self finished bitumen" felt) including preparation of surface but excluding grading complete as directed by the Engineer-in-charge

Meena Enterprises