MLACDS

Amount

Earthwork excavation for foundation and depositing on Bank within initial lead of 10mt and lift of 2mt of all soil except rock etc., complete complying with standard specification.

P.C.C.1:4:8 mix using 40mm metal and the rate including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification.

Supplying and erecting steel centering for the sides and soffits of RCC slab or plane surfaces excluding strutting and the rate including cost and conveyance of all materials and labour charges etc. Complete complying with standard specification.

Below 1 meter height

Above 1 meter height

Supplying, fabricating and placing in position of steel rods (M.S or RTS) including cost of binding wire and the rate including cost and conveyance of all materials and labour charges etc. complete complying with standard specification.

Reinforced cement concrete 1:1.5:3 mix using 20 mm size I.S.S. HBG metal mixing, laying and the rate including cost and conveyance of al materials and labour charges etc. Complete complying with standard specification.

Brick work in cement Mortar – 1:5 mix using best Chamber Bricks and the rate including cost and conveyance of all materials and labour charges etc. Complete complying with standard specification.

Special Ceiling Plastering in cm 1:3 mix to 10mm thick and the rate including cost and conveyance of all material and labour charges etc. Complete complying with standard specifications.

Plastering in cm 1:5 mix to 12mm thick and the rate including cost and conveyance of all material and labour charges etc. Complete complying with standard specifications.

Plastering in cm 1:4 mix to 20mm thick and the rate including cost and conveyance of all material and labour charges etc. Complete complying with standard specifications.

White washing two coats using best shell lime, kanji or prickly pear juice water and the rate including cost and conveyance of all material and labour charges etc., complete complying with standard specifications.

Painting the new wall two coat of priming with best Emulsion and the rate including cost and conveyance of all material and labour charges etc., complete complying with standard specifications.

Supplying and fixing in position of M.S. door and windows the rate including cost and conveyance of all materials and labour charges etc., complete complying with standard specifications.

Supplying and fixing M.S Grill of required size using necessary M.S angles, flats for inner and outer members which should be fixed or welded to masonry of columns including necessary dismandling or making holes and redoing the same to original condition as directed by the departmental officers inclusive of providing one coat of red oxide primer etc., complete.

Painting two coats on new ironwork using best-approved quality of ready mixed enamel paint and the rate including cost of all charges etc., complete complying with standard specifications.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains

Supply and run 2 of 4 sq.mm (56/0.3) PVC insulated SC un sheathed copper contuctor for 1100 V on7/20 GI bearer wire for survice connection mains

Supply and fixing of TNEB meter board suitable for 32 A single phase service connection with 32 A neutral link and earth link (1" X 1/8" Copper flat) on TW plank of size 375 mm X 300mm X 19 mm with supporting TW reepers of 1" thick an either side with painting with suitable bult nuts for fixing the TW plants on wall with earth connection and inter connection with 7/20 PVC insulatated copper wire fro EB meter to fuse unit

Supply and fixing of 16 Amps TPN metal clad switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL

RAVI V (BID ID -1161350)