REPAIR/REPLACEMENT OF ROAD/PERIMETER LIGHT FITTINGS AND OTHER ALLIED WORKS AT MIL STN TALBEHAT

Taking down old unserviceable light fitting of any type and wattage.

Supply, fixing and testing high performance LED Street Light fittings of 72 Watts, energy saving and environment friendly long life pressure die -cast aluminium hosing high power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP-66 Protection and impact resistance of IK07 with 10KV Built-in-Surge Protection Device suitable for pole dia 54 mm complete all as specified and directed ,MAKE : Havells/Philips/Crompton/Halonex

Supply, fixing and testing high prformaqnce LED Street Light fittings of 90 Watts, energy saving and environment friendly long life pressure die -cast aluminium hosing high power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP-66 Protection and impact resistance of IK07 with 10KV Built-in-Surge Protection Device suitable for pole dia 54 mm complete all as specified and directed ,MAKE : Havells/Philips/Crompton/Halonex

Supply and fixing LED driver 70/100 watt for street lights complete all as specified and directed.

Supply and fix timer switch for street lights control for 3 KW Single Phase rating consists of the following items :- (a) Swadeep-02EC-3KW1P (b) contactor AC3 25 Amps - 01 No (c) Incoming MCB of 25 Amps - 01 No (d) Outgoing MCB of 25 Amps - 01 No (e) complete single phase circuit wiring

Supply and fixing in replacement, street light bracket on RCC/Steel tubular pole made out of 40 mm dia bore G I Pipe light grade of length not less than 1.5 mtr bend to required shape for holding the fitting with providing the clamp nut, bolt and washer etc of required size and 02 nos mild steel supporting clamps shall be made out of flat iron of suitable size of requisite length mild steel work shall be painted with two coat of alluminium paint over a coat of red oxide primer complete all as specified and directed by Engr-In-Charge. Make of GI Pipe:- JINDAL, PRAKASH, TATA.

Excavation in trenches not exceeding 1.5mtrs wide & not exceeding 1.5mtr in depth as in soft/ loose soil & getting out complete all as spfd & directed.

Returning , filling in spreading, levelling, watering & well Ramming in layers not exc 25cm thick complete all as spfd & directed.

Removing excavated material not exc 50mtr & deposited where directed at a level not exc 1.5mtr above the starting point complete all as specified and directed by EIC.