Rajasthan

Cancelled

Works

Civil Works - Water Works

ARC for Replacement of Submersible Pump Set and accessories and Deepening of existing 150 or 200 mm dia Tube well at Urban and Rural Water Supply Schemes of PHED Division Khetri, District Jhunjhunu

PHED-Chief Engineer(HQ),Jaipur

KHETRI | Jhunjhunu, Rajasthan

Amount: ₹75 LCloses: 18 May 2026Closed

Timeline

Published9 May 2026
Cancelled15 May 2026

Cancellation Details

Cancellation of Tender

Cancellation of TenderCancellation of TenderReason: Due to admistrative reasons/issuesDocument: cancelled_1.pdf

Published 15 May 2026

Tender Value

₹75 L

EMD Value

₹1.5 L

Closing Date

18 May 2026, 6:00 pmClosed

Tender Inviting Organisation

Name

EXEN PHED DIVISION KHETRI

Address

EXEN PHED DIVISION KHETRI

Work Description

ARC for Replacement of Submersible Pump Set and accessories and Deepening of existing 150 or 200 mm dia Tube well at Urban and Rural Water Supply Schemes of PHED Division Khetri District Jhunjhunu

Tender Information

Tender ID

2026_PHCJA_557729_1

Reference Number

NIB07/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Percentage

Period of Work

365 days

Location

KHETRI

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

3 documents required · 3 mandatory

Fee/PreQual/Technical

RequiredNOTICE AND FEE INFORMATION (.pdf)

RequiredTENDER DOCUMENT (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,000

Tender Fee Payable To

EXEN PHED DIVISION

EMD Fee Amount

₹1.5 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

15 May 2026

Published

9 May 2026

Bid Opening

19 May 2026

Download Starts

9 May 2026

Download Ends

18 May 2026

Submission Starts

9 May 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (30 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. 15 KW (20 HP) and above, head above 120 mtr.	-	-	-	-
2	Up to 5.5 Kw (7.5 HP) and Head above 120 Mtr.	1	Kw	8,159.32	₹8,159.32
3	7.5 KW (10 H.P.) & head above 120 Mtr.	1	Kw	7,050.85	₹7,050.85
4	9.3 KW (12.5 H.P.) & head above 120 Mtr.	1	Kw	6,400	₹6,400
5	11 KW(15.0 HP) & head above 120 Mtr.	-	Kw	5,573.73	-
6	Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter (supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC	-	-	-	-
7	Above 5 HP and upto 10 HP	1	Each	20,570.34	₹20,570.34
8	Above 10 HP and upto 15 HP	1	Each	23,583.9	₹23,583.9
9	Above 15 HP and upto 20 HP	1	Each	27,217.8	₹27,217.8
10	Providing & Lowering in tube well ISI marked GI Pipe medium duty ( B class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect.	-	-	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.24 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.41 MB

Tendernotice_2.pdf

PDF • 3.24 MB

Work Item Documents

BOQ_992903.xls

BOQ • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. 15 KW (20 HP) and above, head above 120 mtr.

Up to 5.5 Kw (7.5 HP) and Head above 120 Mtr.

8,159.32

₹8,159.32

7.5 KW (10 H.P.) & head above 120 Mtr.

7,050.85

₹7,050.85

9.3 KW (12.5 H.P.) & head above 120 Mtr.

6,400

₹6,400

11 KW(15.0 HP) & head above 120 Mtr.

5,573.73

Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter (supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC

Above 5 HP and upto 10 HP

Each

20,570.34

₹20,570.34

Above 10 HP and upto 15 HP

Each

23,583.9

₹23,583.9

Above 15 HP and upto 20 HP

Each

27,217.8

₹27,217.8

Providing & Lowering in tube well ISI marked GI Pipe medium duty ( B class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect.