Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical As per the prequalification scrutiny |
| 2 | Accepted-Technical FLAT NO B 904 AISHWARYAM COURTYARD PHASE 2 AKURDI CHIKHALI ROAD NEWALE WASTI CHIKHALI PUNE PUNE MAHARASHTRA 411062 UDYAM MH 26 0020354 | PUNE | MAHARASHTRA | 411062 | Accepted-Technical As per the prequalification scrutiny |
| 3 | Accepted-Technical PLOT NO 03 NEAR ZP SCHOOL SHIVAJINAGAR KEDGAON AHILYANAGAR 414 005 | AHILYANAGAR | AHILYANAGAR | MAHARASHTRA | 414005 | Accepted-Technical As per the prequalification scrutiny |
Tender Value
Refer Docs
EMD Value
₹44,500
Closing Date
17 Mar 2026, 4:00 pmClosed
Registrar DBATU Lonere
DBATU Lonere, Tal Mangaon, Dist Raigad, 402103
Providing And Fixing Furniture For Various Department
2026_DBATU_1282374_1
2026_DBATU_Providing And Fixing Furniture For Various Department
Open Tender
Civil Works
180 days
DBATU Lonere
As per tender document
2 documents required · 2 mandatory
₹1,180
Registrar DBATU
₹44,500
2 Jun 2026
27 Feb 2026
18 Mar 2026
27 Feb 2026
17 Mar 2026
27 Feb 2026
27 Feb 2026 - 17 Mar 2026
Providing and Installation of Executive Cabin Table, Table Top Shall made up of 25 mm(25+12MM) thk. Pre-Laminated Particle Board with 2 mm thk edge banding all around and 12 mm thk. designer aluminium profile (6DTPROALU) at the bottom the table top all around. The Modesty shall be made of 25 mm Pre-Laminated Particle Board with 2 mm thk edge banding. The Table top shall be Supported by Pedestal from one side and Pedestal shall made of 18 mm thk Pre laminated Particle Board with 75 mm Height of Skirting. Pedestal Body, Facia shall made up of 18 mm thk. Pre-Laminated Particle board and Drawer body shall made up of 15 mm thk. Pre-Laminated Particle Board. Pedestal shall have Box+Box+Box configuration with duplicate Locking Facility. The pedestal Unit should be provided with Equal Three Nos of drawer and all the drawer should be slide with s drawer double telescopic channel. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Other Side of the Table Top shall be Supported by the ERU (Open 2 Door System). The Body, Shutter and Open Shelf of ERU shall made up of 18 mm thk Pre- Laminated Particle Board. The ERU Storage Shall come with Locking Facility. Storage has a soft closing & anti slam mechanism. Metal Leveller shall provide at the bottom of the storage to adjust the floor level up to 5-10 mm. Handle of shutter shall made up to Stainless steel (Matt/Glossy) of Grade 202 with Arc Profile. Wire Management-For wire management, Access Flap shall provide on table top and access flap shall made up of CRCA Sheet with 1.2 mm thick Grade-IS 513:2008 with approved shade of Epoxy Polyester Powder coated to the thickness of 60 to 70 microns. Access flap have size of minimum 350-400 mm to fit the 10 Module of electrical module approved by the architects. Switch Mounting Box shall made up of CRCA sheet with 1.2 mm thick of Grade-513:2008 of in approved shade of Epoxy Polyester Powder coated to the thickness of 60 to 70 microns. Wire shall move from ground to table top through the Vertebrae and Vertebrae shall made up of ABS Plastic with Size 850LxDia 65 mm for movement of more nos of wires. Over All Dimension-2100Lx900Dx750HT+ERU- 900Lx450Dx610HT,
Providing and Installation of Office Table with Complete knockdown structure. • Combination of MS tube, CRCA sheet & PLPB . • Integrated Front modesty which provides support to the table as well. • Integrated Box-Box-File pedestal on RH side. • Vertical duct provided to uptake cable from ground. • The PVC edged banding on all sides of the pre-laminated particle board panel adds up to its neat finish. • Lock is made up of zinc alloy core, steel cam with Key Rotation angle 90 degree, lever rotation: 90 degree. • Telescopic slides provided with drawer. • Align lockers provide a comprehensive solution of secure storage, Net Weight (kg) - 1500x750- 75 Primary Material -CRCA (Cold rolled close Annealed ) Dimensions W x D x H (mm) 1500x750x750, Integrated Pedestal-BBF Plinth height range -7mm to 20mm Drawer -3 Nos,
Providing, assembling and placing in position High Back Executive Office Chair as per specifications - Chair seat shall be made up 12mm thick Moulded Ply Board and Back shall made up of 12 mm ply. Seat and Back shall Covered with leatherette Upholstery with moulded with High Resilience (HR) PU foam of density 45 kg/cum & hardness load of 16 kg -f as per IS 7888 for 25% compression. The Thickness of Seat Cushion shall be 50 mm and back cushion shall be 50 mm thick. Chair shall have headrest covered with leatherette upholstery. The size of seat shall be 512W mmx495 D mm and back size shall be 495W mm X 830 Ht. mm. Seat and Back shall be join through the 8 mm thick MS HR Sheet. Chair shall have adjustment headrest and upholstered with Leatherette. The Size of Nest rest shall be 300 W mm x63 D mm x 125 H mm. Chair shall have adjustable rest as per user requirement. Chair shall have the adjustable type armrest with the 3 D function (Up/Down, Swivel, Front/Back). Armrest shall have metal insert for better stability and strength. The armrest top shall be moulded from PU Pad and mounted on to a drop lift to armrest support & shall have 1 steps height adjustment of 40 -50 mm. Chair shall have Bio synchro mechanism with 4 Position Locking with Tension adjustment, 360 - degree revolving type, seat back tilting ratio 1:2, 3 position tilt limiter. Chair shall have BIFMA Level 3 Gas lift with the height adjustment of 100 mm. The chair shall have high Die Casted aluminium pedestal of size 700 mm (PCD) pitch centre dia. fitted with 5 Nos. injection moulded plastic twin wheel 50 mm dia. castors. Overall Dimension - 730Lx700Wx1170/1270 Ht. and Item shall be complete as per guiding image, manufacturer’s specification and direction of Engineer – in – charge.
Providing, assembling and installation of a Mid Back Chair having cushioned seat and back upholstered with good quality fabric of approved color. The seat shall be made of moulded foam with integrated lumber support having contoured shape at seat back for better comfort. The seat shall be made up of 12 ±0.1mm. thick hot-pressed plywood upholstered with moulded foam and fabric. Back made of Nylon Mesh. The HR polyurethane foam shall be moulded with density= 42±2 kg/m3. The chair shall have BIFMA compliant Class 3 gas lift for seat height adjustment with an adjustment stroke of 100mm. The chair shall be provided with Centre Tilt mechnism with upright position locking, 360 degree revolution, Tilt tension adjustment, Nylon Castors along with Nylon Star Base. The twin wheel castors shall be injection moulded in Black Nylon. The chair shall have PP fixed armrest. Overall Dimensions - 595mm(W) x 620mm(D) x 1020mm(H),
Providing, Assembling and installation of a Revolving Mid Back Chair having cushioned seat and back upholstered with good quality fabric of approved color. The seat shall be made of moulded foam with integrated lumber support having contoured shape at seat back for better comfort. The seat and Back shall be made up of 12 ±0.1mm. thick hot-pressed plywood upholstered with moulded foam and fabric. The HR polyurethane foam shall be moulded with density= 42±2 kg/m3. The chair shall have BIFMA compliant Class 3 gas lift for seat height adjustment with an adjustment stroke of 100mm. The chair shall be provided with Push back with uprightlocking. mechnism with upright position locking, 360 degree revolution, Tilt tension adjustment, Nylon Castors along with Nylon Star Base. The twin wheel castors shall be injection moulded in Black Nylon. The chair shall have PP fixed armrest. Overall Dimensions -640 L x 640 W x 950/1040 H, Seat Dimension - 460 W x 450 D x 460/550 H(eff.), Backrest Dimension - 440 W x 500 H, 630 H(eff.)
Providing, Assembling and installation of Double seater Training Table Material Specifications •Body-CRCA (Cold rolled close Annealed) •Table Top-PLPB, MDF, Plywood, •Net Weight (kg) 31 kg for 1200 x 600 x 750mm, •Dimensions W x D x H (mm) 900~1500mm x 600~750mm x 750mm, Features- •Complete knockdown structure. •Leg construction made of CRCA. •Bottom feet and worktop support profile are of trapezoidal shape (84x25mm). •It provides minimum elevation along with half round plastic caps from the floor which will not obstruct with user feet. •Pillar is constructed with removable outer and inner covers (210x40mm). •Outer cover provides aesthetics along with different types of perforation and color options. •Inner covers allow easy access for cable maintenance. •Legs and other structures are designed in such a way that it provides maximum space for user. •Two types of modesty options: Metal and Wooden along with cable way. ( 356MM from the floor) •Easily accessible switch board option provided on front modesty. •Different configurations can be done using this leg. •The PVC edged banding on all sides of the pre-laminated particle board panel adds up to its neat finish •Wire-managementCable management can be done from floor , through the leg and can be run through leg to leg. Number of cable would be 6nos considering Dia 6mm of cable •Body colour-TEXTURE WHITE, Wooden colour-MAPLE.
Providing, assembling, transporting & placing/fixing of Partition Based Modular Linear Workstation with specifications. Partition and Frame- Partition shall made up of anodised aluminium grade – TS 6063 with thickness of 60 mm with approved shade of Epoxy Powder Coated shade of thickness 60 to 70 microns. The overall height of partition shall 1200 mm HT and height of partition includes 100mm skirting, 2 modules of 550mm and Partition shall divide into two tiles come with Marker Board and Pinup Fabric Option as per design as directed by the Site Engineer. Marker Board shall made up of 8 mm thick MDF Board with High Glossy Marker sheet pasted over the MDF Board and Fabric shall come with 340 GSM. Wire Management- two number of raceways shall be provided along the workstation. Both raceways shall have 100mm Ht. to be provided for cable management above the table top for electrical module and another at the skirting level for LAN/telephone. Raceway shall be made up of anodised aluminium grade – TS 6063 with approved shade of Epoxy Powder Coated to thickness of 60 to 70 micron. To provide necessary cut out for the electrical module/Data by the supplier as directed and as per drawing by the Site Engineer. Table Top and Gable End- Made of 25mm thick Interior Grade Pre-Laminated Particle board confirming to IS-14587:1993, edge banded with matching 2 mm thick PVC lipping. The table top should be fixed with suitable brackets made out of 1.2mm thick anodised aluminium grade – TS 6063 with approved shade of Epoxy Powder Coated to thickness of 60 to 70 microns. Size: 900mm W X 600mm D X 750mm H,
Metal EBCO Keyboard tray - Each Table should provide Metal Keyboard Tray with powder coated finish with mouse key board tray and KBPT shall Accommodates mouse alongside keyboard. Tray size: 645 mm x 225 mm
Glass Cabinet Technical Specifications: 1) Scope of Supply: Supply and Installation of Glass door Diplay cabinet 2) Overall Size: 900W X 450D X 1650H mm . 3) Material of Cabinet: i) 10mm thick toughened Glass for three sides. ii) 18mm thick plywood laminate finish for back side, Top side, Bottom side iii) Shelves of cabinet are made up with 10 mm thick toughened glass which are fixed in position. 4) 3.00 nos of shelves are fitted in rope and Bracjet fitting. The shelves are to be provided with an arrengement that shelf height can be adjustable as and when required. 5) All glass doors should have lock and Key arrengements. 6) LED light strips to be provided along the front two support members of the display unit such that it illuminate the entire cabinet.
Table Top Made of 18mm thick Interior Grade plywood , edge banded with matching 2 mm thick PVC lipping. The table top should be fixed with suitable brackets made out of 1.2mm thick anodised aluminium grade – TS 6063 with approved shade of Epoxy Powder Coated to thickness of 60 to 70 microns.Understructure will be made up with 18mm thick plywood with two openable shutters and one shelves. Size: 900W X 750D X 750H mm
1) MAIN BODY: Construction The construction of the unit is made up of 0.8 mm steel understructure and body with Welded construction and door front in 0.8 mm CRCA Steel sheet. Each body block (SS\ SL \TM) building consists of Drawer and shelves 0.8mm. Each unit has 2 loading levels. Body units are bolted to undercarriage. Station Height from ground is 0 ±5 mm (882 body +18 mm Granite Top),Finish: The bodies including shelves are given anti- rust surface treatment & are powder coated with epoxy polyester powder. It involves an 8-step treatment consisting of Hot water rinse, knock of degreasing, degreasing, cold water rinse, phosphate, cold water rinse, and passivation & dry off oven treatment. Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns. The testing of paint is done for various physical & chemical properties. The material is then oven baked with a controlled temperature of 180 deg. C to 200 deg. 2) SHELF : Construction Construction: It is made of 0.8mm CRCA steel sheet. Its max load bearing capacity is 80 Kg uniformly distributed per shelf as per different configurations. Shelves are mounted on support brackets &shelf level can be adjusted, Size: Shelf Depth for various options: Unit Depth Shelf depth- (with Hinged doors/no doors 450 mm. Allowable safe load per shelf in a given configuration: Safe shelf load will be determined from the load carrying capacity of understructure and the UDL carrying capacity of the shelf. (Minimum of two) It is tabulated below for all 3-4 configurations. 3) UNDERSTRUCTURE :- Construction: The understructure is welded frame made of CRCA sheet 0.8 mm thick steel. Suitably fabricated to take the loads based on configuration.,Finish: The undercarriage after pre-treatment is coated with final finishing consisting of epoxy polyester powder coat as per approved color & shade minimum 40 microns 4) ACCESSORIES : All Locks & channels will be used of Ebco make.Electrical accessories we are provide all Roma make switch socket, Modular plate etc. Other hardware like handle will be confirm before final production drawing submission as per requirement, we will proceed with PVC Handle/Handle 202 CTC 102mm. PP Sink will be premier make in standard Size Brass make Faucet ( 1 way/3 way Tap),All Locks & channels will be used of Ebco make. Electrical accessories we are provide all Roma make switch socket, Modular plate etc. Other hardware like handle will be confirm before final production drawing submission as per requirement we will proceed with PVC Handle/Handle 202 CTC 102mm. PP Sink will be premier make in standard Size Brass make Faucet ( 1 way/3 way Tap) Specifications are same for below two items.Environmental Lab Bench 4550x750x900 ( W x D x H) (mm) with PP sink & Tap,
Environmental Lab Bench 3505x750x900 ( W x D x H) (mm) with PP sink & Tap
Environmental Lab Bench 2185+655x750x900 ( W x D x H) (mm) with PP sink & Tap
Supply and Installation of Bed Side Stool with SS Top,Size: 300mm L X 300mm W X 510mm H, Made up with SS Top fabricated from 20gm CRCA Sheet for long lasting durability. Legs constructed using 25mm X 25mm square pipe strengthened with High Quality PVC Shoes for stability.
Providing and placing an Eco friendly Waste bin for waste disposal and collection. The body of the waste bin shall be made from Shock absorbent high density UV stabilized polyethylene to avoid degradation due to ultra violet radiation. The waste bin shall be have good resistance from common chemicals and acids. The waste bin shall be able to withstand low and high temperatures. The capacity of the waste bin shall be 120 litres. Top Outside Dimensions - 480 x 550mm, Bottom Outside Dimensions - 450 x 500mm, Height - 940mm.
Please Enable Macros to View BoQ information
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.88 MB
ProvidingFurniture.pdf
Tender Documents • 1.79 MB
BOQ_2205683.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid