Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹14.4 Laccepted-aoc | ₹14.4 L | accepted-aoc |
Tender Value
₹16.9 L
EMD Value
₹42,500
Closing Date
11 May 2026, 11:00 pmClosed
Karnataka Power Transmission Corporation Limited
EE Civil
Extension of Control room building at 220kV station KIADB, Doddaballapura. (Call-3)
KPTCL/2025-26/BD/WORK_INDENT2694/CALL-2
KPTCL/2025-26/BD/WORK_INDENT2694/CALL-2
Open
Buildings
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Bengaluru
6 documents required · 6 mandatory
Total value of civl engineering works executed and payments received in the last five years (year-wise)
The bidder shall have to scan and upload valid registered KPWD/CPWD Civil contractor License.
List of existing commitments and ongoing work
The bidder shall have to upload GST registration certificate issued by the competent authority
Bid capacity: Bidders who meet the specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value
self-declaration stating that, the tenderer is not blacklisted, terminated in any of the Public sector undertaking (PSU)/ Government of Karnataka
₹500
₹42,500
11 May 2026
24 Apr 2026
13 May 2026
2 May 2026
Extension of Control room building at 220kV station, KIADB, Doddaballapura. (Call-2)
Preparation of plan,Elevation and structural design of the building and submission of 3 sets of drawings (DR)
Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area as per direction of Engineer-in-charge.(v-2,p-193,i-19.61)
Earth work excavation by manual means for drains,canals,waste weir,draft,approach channels,key trenches,foundation of Buildings & bridges and such simillar works in all kinds of soils,as per drawing a...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Super structures of building ,Road works,Water works,Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/b...
Providing and laying in position Cement Concrete for all Super structures of building ,Road works,Water works,Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/b...
Providing and laying in position Cement Concrete for all Super structures of building ,Road works,Water works,Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/b...
Providing and laying in position Cement Concrete for all Super structures of building ,Road works,Water works,Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/b...
Providing and laying in position Cement Concrete for all Super structures of building ,Road works,Water works,Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/b...
Supplying,fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials,machinery,labour,cleaning,straightening,cutting,bending,hooking,laping/welding joints,tying with bin...
Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering,providing and removing scaffolding,including...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering,provi...
Providing and fixing Structural Steel work in single section,fixed with or without connecting plate,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer a...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08 percentage and conforming to IS:15622,of approved brand & m...
Providing and laying Polished Granite stone flooring in required design and patterns,in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm...
Providing and applying white cement based putty of average thickness 1 mm,of approved brand and manufacturer,over the plastered wall surface to prepare the surface even and smooth complete as per spec...
Finishing walls with 100 percentage Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004,Alkali & fungal resistance,dirt resistance exterior paint of requi...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt,dust,mortar drops and ...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Filling available excavated earth (excluding rock) in trenches,plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramm...
Disposal of building rubbish / malba / similar unserviceable,dismantled or waste materials by mechanical means,including loading,transporting,unloading to approved municipal dumping ground or as appro...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free wit...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite,rolling and lowering into trenches,laying true to line and level and perfect linking at joints,...
Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete 110mm dia PVC couplers ...
Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110 mm dia PVC Elbows (V-5,P-117,I-10.9.8...
Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110 mm dia PVC Tee(V-5,P-117,I-10.10.8)
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width,along route of walls chipped for s...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes,for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPV...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes,for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPV...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap,10 litre low level white P.V.C. flushing cistern,including flush pipe,with manually contr...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing wash basin with C.I. brackets,15 mm dia CP Brass single hole basin mixer of approved quality and make,including painting of fittings and brackets,cutting and making good the walls...
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (V-2,P-133,I-14.8)
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40mm dia (V-2,P-136,I-14.28.2.2)
Providing and fixing PTMT urinal cock of approved quality and colour using 15 mm nominal bore,80 mm long,42 mm high and 30mm wide with BSP female threads weighing not less than 48 g.(V-2,P-138,I-14.43...
Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy(V-2,P-139,I-14.54a)
Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS : 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and ove...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore(V-2,P-117,I-13.4.2)
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm nominal bore(V-2,P-119,I-13.10.3)
Supplying heavy gauge PVC conduit pipe 25 mm dia Confirming to IS 2509 with suitable size bends,junction boxes,adhesive paste etc ,and fixing using inverted wood plugs in case of RCC ceiling and RCC w...
Supplying and fixing PVC/metal conduit Deep junction box (Ele Sr,P-2,I-1.5.2)
Supplying and flush mounting teak wooden box without front plank,made of not less than 12 mm thick wood,after due groove cutting,finishing with necessary cement plastering complete 12" x 9" x 3" (300 ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ISO...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS ...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws,bolts nuts etc.,complete on the existing met...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch(Ele Sr,P-9,I-3.6.1)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module (Ele Sr,P-9,I-3.6.4)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch (Ele Sr,P-9,I-3.6.7)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32A DP Switch (Ele Sr,P-9,I-3.6.9)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket (Ele Sr,P-9,I-3.6.10)
Supplying & Fixing of 250-400 W lamp Holder (Ele SR,P-52,I-12.49)
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with Short circuit breaking capaci...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps,bolts,nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3 phas...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with Short circuit breaking capaci...
Supplying of recess mounting non integral type LED modular down light 2'x2' 40-42W LED w luminaire comprising of pressure decast/extruded aluminium housing,with spring loaded false ceiling clamps,Powe...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires,re...
Supplying capacitor type ceiling fan complete with down rod blades,shackle,canopies etc,for operation on 230 V,50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearin...
Fixing a ceiling /wall mounting fan of all capacities and all types,with necessary clamps and 'S' hook made out of 15mm dia MS rod,with 5 A. ceiling rose of approved quality with necessary length of 2...
Free Standing Table for Cabin - without frames Providing and fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick PLPB table top,25 mm thick PLPB with edge bonded End table,1...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT-1 kw-1 23426.docx
Instructions to Tenderers • 0.04 MB
KW1 23426.docx
Tender Document • 0.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .