REPAIR MAINT OF TRADE PATTERN FURNITURE AT VARIOUS ACCN UNDER GE RANCHI

Chair Revolving TP M&L for Removing of unserviceable/broken parts of Chair Revolving TP without damaging of other parts of Chair Revolving TP, supply and fixing new parts as shown on drg and specified.

Supply and fixing in replacement of seat of chair revolving made out of 12mm thick pressed plywood upholstered with fabric and moulded polyurethane foam. of existing chair complete all as directed by Engr-in-Charge.

Description all as per ser item No 1.01 above, here-in-before but back . The back form shall be deisgned with contour lumber support for extra comfort with PVC leaping all around of chair revolving.

Supply and fixing in replacement of hydraulic system of chair revolving complete all as directed by Engr-in-Charge. (TP)

Supply and fixing in replacement of existing arms made out of black integral skin polyurethene reinforced with MS insert. It shall be scratch & weather resistant,of chair revolving all as directed by Engr-in-Charge. (TP)

Supply and fixing in replacement of existing pedestal (bottom) made out of injection moulded In black 30% glass filled nylon . A 10.5 mm Dia forged bright Zinc plated MS Castor PIN is of Pressfitted into each prong for holding the sactors. It is 600 mm Pitch-Centre Dia, consisting of five legs with twin wheel coaster of chair revolving complete all as directed by Engineer-in-Charge. (TP)

Chair Computer (FD/E6/MAP/01 & TP) M&L for Removing of unserviceable/broken parts of Chair computer with arms without damaging of other parts of Chair computer, supply and fixing new parts as shown on drg and specified.

Supply and fixing in replacement of seat of chair computer made out of 12mm thick pressed plywood upholstered with fabric and moulded polyurethane foam. of existing chair complete all as directed by Engr-in-Charge.

Description all as per ser item No 2.01 above, here-in-before but back . The back form shall be deisgned with contour lumber support for extra comfort with PVC leaping all around of chair computer with arms complete all as directed by Engr-in-Charge.

Supply and fixing in replacement of hydraulic system of seat of chair computer with arms complete all as directed by Engr-in-Charge.

Supply and fixing in replacement of existing arms made out of black integral skin polyurethene reinforced with MS insert. It shall be scratch & weather resistant,of chair revolving all as directed by Engr-in-Charge. (TP)

Supply and fixing in replacement of existing pedestal (bottom) made out of injection moulded In black 30% glass filled nylon . A 10.5 mm Dia forged bright Zinc plated MS Castor PIN is of Pressfitted into each prong for holding the sactors. It is 600 mm Pitch-Centre Dia, consisting of five legs with twin wheel coaster of chair computer with arms complete all as directed by Engineer-in-Charge. (TP)

Table office officer/clk steel (FD-381, 1002, 1003 & FD-1004). M&L for Removing of unserviceable/broken parts of Table office oficer/ Clk steel without damaging of other parts of table, supply and fixing new parts as shown on drg and specified.

Material and labour for Repair and painting to frame of Table office officer/clk steel with synthetic enamel grey/OG paint including preparation of surface with rubbing with emery paper and providing 04 Nos PVC hard rubber shoes to leg frame of Table as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of top of table office clerk steel with new top made of 18/19mm thick MR Gde plywood as per IS:303 of make:- Greenply/ Centuryply / Samrat/BTSP(Gold) covered with 0.8mm thick laminated sheet of make:- Greenlam/Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin pasted with probond adhesive /necessary glue alround to top of size 1220 x 730mm all as shown on drg and directed by Engr-in-Charge. (FD-381 & 1004)

Description all as per ser item No 3.02 above, here-in-before but top of table office officer of size 1830 x 915mm. (FD-1002)

S&F in replacement of existing unserviceable drawers of table office officer/clerk steel with new drawers made out of 0.9mm thick M.S/CRCA sheet of make:- TATA/JINDAL /SAIL with locking arrangement shape and size all as per shown on drg and directed by Engr-in-Charge. (FD-381, 1002, 1003 & FD-1004).

Replacement of unserviceable cabinet/box only of outer side of drawer of table office officer/clerk steel with new drawers made out of 0.9mm thick M.S/CRCA sheet of make:- TATA/JINDAL/SAIL with locking arrangements shape and size as per shown on drg and as per directed by Engr-in-Charge. (FD-381, 1002, 1003 & FD-1004).

Supply and fixing in replacement of lock with new MS lock 4 lever of table office officers/ clerks steel of approved best quality with duplicate keys all as specified. (Make of Lock:- Lico/Reena or equivalent) (FD-381, 1002, 1003 & FD-1004).

Dining Table for OR's FD-165 (M) M&L for Removing of unserviceable/broken parts of Table dining OR steel without damaging of other parts of Table, supply and fixing new parts as shown on drg and specified.

Supply and fixing in replacement of legs & stiffners of dinning table for ORs with new made of 25mm square conduit pipe of wall thickness 1.6mm of make:- Appolo / Nizon / TATA or ISI mark duly electric welding all around of pipe all as specified and shown on drg and as directed by Engr-in-Charge. (FD-165(M).

Material and labour for Repair and painting to frame of Table dinning OR's steel with synthetic enamel black paint including preparation of surface by rubbing with emery paper and providing 04 Nos PVC hard rubber shoes to leg frame of Table as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of existing top of table dinning ORs with new top of size 1900x685mm made of 18mm thick BWR Gde plywood as per IS:303 of make:- Greenply/Centuryply/ Samrat/BTSP(Gold) covered with 1 mm thick aluminium sheet of table dining Ors all as per drg and directed by Engr-in-Charge. (FD-165(M).

Tepoy Verandah FD-255, 383 & FD/E6/MAP/17 M&L for Removing of unserviceable/broken parts of Tepoy Verandah without damaging of other parts of Tepoy, supply and fixing new parts as shown on drg and specified.

Supply and fixing in replacement of legs frame U Type of teapoy verandah with 19mm dia MS round pipe 1.6mm wall thickness of make:- Appolo/Nizon ISI mark all as specified and shown on drg. and directed by Engineer-in-Charge..

Material and labour for Repair and painting to frame of tepoy verandah with synthetic enamel black paint for FD/E6/MAP/17 & White Synthetic Enamel Paint for FD-255,383 including preparation of surface with rubbing with emery paper and providing 04 Nos PVC hard rubber shoes to leg frame of Tepoy as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of top of teapoy verandah with 18mm thick MR Gde plywood as per IS:303 of make:- Greenply/Centuryply/ Samrat/ BTSP(Gold) covered with 0.8mm thick laminated sheet of make:- Greenlam/Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/Fixin pasted with probond adhesive /necessary glue alround to top of Teapoy Verandah all as specified and shown on drg. (FD-255 & 383)

Description all as per ser item No 5.03 above, but Top of Teapoy vrandah MAP (FD/E6/MAP/17)

Chair Easy Cushioned Steel (FD-121M) M&L for Removing of unserviceable/broken parts of Chair Easy cushioned without damaging of other parts of Chair easy, supply and fixing new parts as shown on drg and specified.

Material and labour for Repair and painting to frame of Chair Easy Coushined Steel with synthetic enamel black paint including preparation of surface with rubbing with emery paper and providing 04 Nos PVC hard rubber shoes to leg frame of Tepoy as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of seat of Chair Easy Steel made of 12mm thick plywood MR Gde and 50mm thick cushion of 32 density pasted on plywood and covered with leatherite fabrics/ tapestry cloth all as shown on drg and directed by Engr-in-Charge. (FD-121 (M).

Description all as per ser item No 6.02 above, but back of Chair Easy Steel. (FD-121(M)

Supply and fixing in replacement of arm to chair easy steel of best quality 2nd class hard wood, free from knots, infection with 02 Nos steel screw as per drg duly painted with two coats of black synthetic enamel paint over a coat of wood primer and as per directed by Engr-in-Charge. (FD-121(M).

Almirah Large Steel ( FD-1031 & FD-1033 & FD/E6/MAP/18) :M&L for Removing of unserviceable/broken parts of Almirah Large Steel of all size without damaging of other parts & supply and fixing new parts as shown on drg and specified.

Material and labour for Repair and painting to frame of Table Bed Side Steel with synthetic enamel white paint including preparation of surface with rubbing with emery paper and providing 04 Nos PVC hard rubber shoes to leg frame of Tepoy as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of top of Table bed side steel of Drg No:- FD- 157(M) with with new top made of 18/19mm thick MR Gde plywood as per IS:303 of make:- Greenply/Centuryply/Samrat/BTSP(Gold) covered with 0.8mm thick laminated sheet of make:- Greenlam/Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin pasted with probond adhesive /necessary glue alround to top all as shown on drg and directed by Engineer -in-Charge. (FD-157(M)

Table 900x600x760mm with/without drawer steel (Fd-1007,1008 &1009) M&L for Removing of unserviceable/broken parts of Table of all size without damaging of other parts of Table, supply and fixing new parts as shown on drg and specified.

Material and labour for Repair and painting to frame of Table 900x600x760mm with/without drawer steel& Table 900x900x760 steel with synthetic ename Grey/ OG paint including preparation of surface with rubbing with emery paper and providing 04 Nos PVC hard rubber shoes to leg frame of Table as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of top of table 900 x 600 x 760mm with/ without drawers steel with new one made of 18mm thick MR Gde plywood as per IS:303 of make:- Greenply/Archidply/Centuryply/ Samrat/ BTSP(Gold) covered with 0.8mm thick laminated sheet of make:- Greenlam/Archidlam/ Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin pasted with probond adhesive /necessary glue alround to top of table all as shown on drg and as directed by Engineer -in-Charge. (FD-1007 & FD-1008)

Description all as per ser item No 8.02 but Table 900x900x760mm Steel. (FD-1009)

Supply and fixing in replacement of legs and stiffeners of table 900 x 600 x 760mm with/without drawers steel with new legs made of 25mm square conduit pipe 1.6mm wall thickness of make:- Appolo/Nizon or ISI mark duly electric welding all around of pipe complete size and shape all as shown on drg and directed by Engr-in-Charge. (FD-1007 & FD-1008)

Supply and fixing new H type stiffener for jointing legs of 25mm square conduit pipe of 1.6mm wall thickness of make:- Appolo/Nizon or ISI mark shall be welded all around pipe to support the legs of the table at appropirate height approx 100mm high from the bottom of legs all as directed by Engineer-in-Charge. (FD-1009)

Supply and fixing in replacement of drawers of table 900 x 600 x 760mm with drawers made out of 0.9mm thick MS/CRCA sheet of make:- SAIL/JINDAL/TATA with drawer lock of make:- Lico/Reena or equivalent of size and shape all as specified and shown on drg including lock with duplicate keys. (FD-1008)

Rack shoe steel (FD/E6/MAP/02 R) M&L for Removing of unserviceable/broken parts of Rack shoe steel of all size without damaging of other parts of Rack shoe, supply and fixing new parts as shown on drg and specified.

Material and labour for Repair and painting to frame of Rack shoe steel FD/E6/MAP/02 R with synthetic enamel Black paint including preparation of surface with rubbing with emery paper and providing 04 Nos PVC hard rubber shoes to leg frame of Rack as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of Shelf of size 700x300 mm madeout of 19mm dia MS pipe of 18 guage frame with jali madeout of 3mm dia MS rod 3nosx9nos equidistant frame work welded with the main frame by electric welding of make:- SAIL/JINDAL/TATA of size and shape all as specified and shown on drg .

Supply and fixing in replacement of Leg madeout of 25 mm dia MS pipe of 18 guage welded with the main frame by electric welding make:- SAIL/JINDAL/TATA of size and shape all as specified and shown on drg .