PROVN OF OFFICE SPACE AND ALLIED INFRA FOR QMG BRANCH AT BB CANTT, SRINAGAR

Amount

Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soil, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, or for laying of cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outt in soft/loose soil, complete all as specified and directed.

M & L for plain cement concrete 1 : 4 : 8 Type D2 using 40 mm graded crushed stone aggregsate, as in foundation, filling and mass concrete, complete all as specified and directed.

Form work to sides of concrete foundation, footings plinth beam etc., vertical or to batter, complete all as specified and directed.

M & L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregsate) as in foundation footings, foundation beam,plinth beams and bases of columns basement slabs, and mass concrete, complete all as specified and directed.

Form work to sides and soffits of floor or roof beams, beam, lintels, cantilevers etc, fair finished surface, complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregsate, as in beams, cantilevers , bressummers, lintels over 1.5 m span complete all as specified and directed.

Form work to soffits of suspended slab such as roof slab, landings and similar work . (Horizontal or sloping). For fair finished surface n.exc 200 mm thick complete all as specified and directed.

M & L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregsate as in columns pillers, piers, posts and struts complete all as specified and directed.

Form work to sides of pillars, posts, struts, piers, columns, fair finished surface complete all as specified and directed.

M & L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregsate, as in slabs supported on walls beam and colums in floors, roofs, landing, deck slabs and shelves and the like complete all as specified and directed.

S & F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia, complete all as specified and directed.

S & F TMT steel bars 5 to 10 mm dia in stirrups, spacers and binders and binding with and including MS wire annealed not less than 0.9 mm dia, complete all as specified and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil, complete all as specified and directed.

M&L Removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point, complete all as specified and directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortor 1 : 6, complete all as specified and directed.

M & L brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortor 1 : 4 in half brick thick walls, complete all as specified and directed.

M & L for 20mm thick Damp proof course in cement mortor 1:2 to horizontal or vertical surfaces including necessary formwork, complete all as specified and directed.

Supply only Integral waterproofing compound,complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

M & L broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M & L for 75 mm thick plain cement concrete 1:4:8 Type D2 ( using 40 mm graded crushed stone aggregate) as in sub base to floors, complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 ( using 12.50 mm graded crushed stone aggregate) as in sub base of floors finished even and fair, complete all as specified and directed.

M&L for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles exceeding 0.42 sqm and not exceeding 1.00sqm, in floors etc. set and jointed in neat cement slurry and pointed in cement to match white or coloured over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 , complete all as specified and directed

M&L Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, as in skirting, dados, walls, vertical surfaces etc. set and jointed in neat cement slurry and pointed in cement to match white or coloured over and including 10mm thick backing coat in cement mortar 1:3, complete all as specified and directed.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles and including 15mm thick screed bed or bedding layer in cement mortar 1:4 , complete all as specified and directed

M&L Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X350X 7mm thick, as in skirting, dados, walls, vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in cement mortar 1:3, complete all as specified and directed.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Gde Fe 410-W (Gde- E-250) Qty-A, complete all as specified and directed.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment of Gde Fe 410-W (Gde- E-250) Qty-A, complete all as specified and directed.

S & F 16mm dia mild steel screw bolt (machine made) with hexagonal or square head at one end and screwed the other or screwewd both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 15cm and n exc 22.5cm long, complete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for 1st class softwood (Australlian wood) as per J& K local practice panelling 10 mm thick including 9 mm thick BWR plywood on the wall and finally finishing with french polish (two or more coats) and fixed, complete all as specified and directed

M&L for false ceiling,pattern wooden like (khatamband pattern) as per J & K local practice design as approved by GE with ornamental wood work made out of ornamental wood pattern including 12 mm thick BWR plywood and necessary framework and finally finishing with french polish (two or more coats) and fixed, complete all as specified and as directed

S&F 6MM Tthick Non asbestos fibre cement designer board /pre Laminated self embossed texture designer board E-Board classic size 600x600 m , HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI Frame work for Seamless ceiling size 600mmx600mm with main runner 38x24x0.9mm thick cross tee 8.6x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hanger 1200mm centre to center both ways fixed with steel dash fasteners or from purlin from the roof with alignment dip complete as per manufacturer's instructions, complete all as specified and directed.

S&F 20mm thick 2nd class softwood clean sawn boards or planks, width n exc. 25 cm as in eavs board/ wall boarding etc., complete all as specified and directed.

M & L for 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth with out uing extra cement, complete all as specified and directed.

M & L for 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth with out uing extra cement, complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar (1:3) & finishing the surface even & smooth without using extra cement as in ceiling, soffits of slab complete all as specified and directed.

M & L for preparing surface of newly plastered walls with 3mm thick wall care putty and applying two coats of Apex (ultima) paint over a coat of primer, complete all as specified and directed.

M & L for preparing surface of newly plastered walls and applying two coats of oil bond distemper over chalk whitening preparatory to distempering, complete all as specified and directed.

M & L for 2nd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed, complete all as specified and directed.

S & F 2nd class hard wood 35mm thick plain framed panlled shutters (any numbers of panels) of 2nd class hard wood with panels of timber flat on both sides or of veenerred particles boards medium density, wood particle board with commercial face veereers complete all as specified and directed..

S & F aluminium powder coated ventilators made of the following specifications :- (Net external size of ventilator shall be measured. Following items are included in this unit rate.) (a) Aluminium frame powder coated stiles, bottom, top and middle rail of hollow section 50 mm x 25 mm x 1.80 mm thick. (b) Lower portion of ventilator shall be fixed with 3 mm thick pin headed glass fixed with suitable aluminium beading clips and EPDM beading (rubber). (c) Upper portion shall be fixed with aluminium powder coated louver guides fixed with 3 mm thick pinheaded glass with suitable EPDM beading incl suitable handle and clips. (d) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with suitable frame in upper panel. (e) Repair to the jamb, cills and all sides around the window is incl in unit rate. The repair finishes to match the existing surfaces like tiles, plastering etc.

S & F aluminium powder coated sliding window made of the following specifications :- (Net external size of window shall be measured. Following items are included in this unit rate.) (a) Aluminium frame powder coated all around of hollow section 100 mm x 44 mm x 1.60 mm thick. (b) Provn of 03 trade runners of size 92 x 31.75 x 1.10 mm. (c) Provn of glazed sliding shutters (02 Nos) of section 44 mm x 18 mm x 1.25 mm provided with 3.50 mm thick tinted glass with suitable EPDM beading and locking clips arrangement. (d) Provn of 01 No gauzed shutter of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm with suitable EPDM beading and locking clips arrangement. Section of shutter as per para 9 (c) above. (e) Aluminium powder coated grill of weight not less than 2.60 Kg/Sqm on external side with suitable frame/aluminium runner to be fixed on the window frame. (f) Repair to the jamb, cills and all sides around the window is incl in unit rate. The repair finishes to match the existing surfaces like tiles, plastering etc.

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC "C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing, complete all as specified and as directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube, complete all as specified and directed.

S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm, complete all as specified and as directed.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed, complete all as specified and directed.

S&F EWC cascade with all fittings and accessories all as per manufactures instruction, complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm, complete all as specified and directed.

S&F, 250mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt tyoe) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed

M&L for preparation of new painted wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink prime, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete complete all as specified and directed.

M & L 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2, complete all as specified and directed.

S & F Vitreous china wash basin white flat back size 580x450 mm excluding taps waste chain and plug and porcelain stopper but including brackets including 15 mm bore centre hole mixer fixed complete alongwith pedestal, complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white (including flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified and directed.

Supply and fixing GI water tubing 15 nmm bore medium grade galvanised with all fittings like socket, union, elbow, bend, etc. jointed and fixed to walls, ceilings or laid on floors , complete all as specified and directed.

Supply and fixing GI water tubing 20 nmm bore medium grade galvanised with all fittings like socket, union, elbow, bend, etc. jointed and fixed to walls, ceilings or laid on floors, complete all as specified and directed.

S&F 15 mm dia PVC connecting pipe 450mm long with PTMT nuts of suitable size at both ends complete all as specified and as directed.

S&F in 15 mm bore, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F 15mm bore, bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F brass cromium plated tubeler towel rail 20 mm dia inclding brackets, complete all as specified and directed.

S& F stainless steel Towel Rack of ornamental type size 500x300, complete all as specified and directed.

S& F Electronic hand dryer machine, complete all as specified and directed.

S & F CP steel grating 75/100mm dia, complete all as specified and directed.

S&F 1000 litres capacity rotaional moulded polythelene water storage (Three layer ) (cylindrical vertical with closed top) hoisted and fixed in positions all specified in SSR part-I, complete all as specified and directed.

S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut,complete all as specified and directed.

M&L for PVC (SWR) floor trap, 75mm dia bore plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F for PVC (SWR) pipes 75mm dia bore single sockets, in any length with rubber ring joints, laid in trenches or floors/wall, complete all as specified and directed.

S&F PVC (SWR) bends 75mm dia bore, complete all as specified and directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work con-forming to Fe.290.Gde-E-165, complete all as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S & F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S & F 15 mmGun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

M & L for plain cement concrete 1 :3: 6 Type D2 using 40 mm graded crushed stone aggregate as in bed to drain pipes 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

M&L for 150mm bore salt glazed ware drain pipe, of Grade 'A' laid in trenches and jointed with cement joint , complete all as specified and directed.

M & L PCC 1 : 2 : 4 Type B1 ( 20 mm graded aggregate) as in providing, cement concrete inlintel up to 1.5m clear span, cills, steps, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, complete all as specified and directed.

M & L Precast reinforced cement concrete 1 : 2 : 4 Type B1, using 20 MM graded crushed stone aggregate, as in cover slab (for manholes etc), chajjas, mangers, shelves etc. set in cm 1 : 6 complete with joints to math. complete all as specified and directed.

Cutting into existing manholes 150mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and directed.

M/L for brick work with sub class 'B' bricks straight or curved on plan built in cement moprtor 1:4, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B2, using 40mm graded crushed stone aggregate, as in surface channels and drains, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth with using extra cement, complete all as specified and directed.

M&L 75 mm thick plain cement concrete 1:4:8 type D2 (Using 40mm graded stone aggregate) as sub base to floors,complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

Material and labour for single phase point wiring system used as copper conductor wire for phase and neutral wiring system, the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 sqmm (nominal area) ISI Marked drawn through wiring system on wall or concealed in wall with the help of heavy duty ISI mark PVC conduit pipe or PVC casing capping ISI mark in any length wiring system and along with its all connected fittings accessories including providing of suitable size of modular boxes and modular plates of suitable way mounting of any types/size switches sockets,regulators etc and including using/ drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multi stranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling to match it as per the existing surface of wall/ ceiling for one light point complete all as specified and directed.

Description complete all as per serial item No 88 here-in-before, but one light point / fan point wiring system controlled by one way switch complete all as specified and directed.

Description ccomplete all as per serial item No 88 here-in-before, but one 5 Amp socket outlet point wiring system fixed on same board and controlled by one way switchcomplete all as specified and directed.

Description complete all as per serial item No 88 here-in-before, but one 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch complete all as specified and directed.

Description complete all as per serial item No 88 here-in-before, but one bell point wiring system fixed on board and controlled by one way bell switchcomplete all as specified and directed.

Description complete all as per serial item No 88 here-in-before, but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system, complete all as specified and directed.

Description complete all as per serial item No 88 here-in-before, but using single runs of PVC insulated FRLS wire ,1100 volt grade with multistranded copper conductor wire of size 4 Sq.mm (Nominal area) ISI Marked for high power wiring system with fixed on independent board and also providing of 4 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as continuous earth wire, complete all as specified and directed.

Supply and fixing of modular type switch 5/6 Amps 220 Volts AC,one module, complete all as specified and directed.

SSupply and fixing of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular, complete all as specified and directed.

Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module, complete all as specified and directed.

Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete all as specified and directed.

Supply and fixing of one/two modular type step type electronic fan regulator with having hum free step alongwith speed control know, complete all as specified and directed.

Supply and fixing ceiling rose three terminals type made out of polycarbonate , isolated body, complete all as specified and directed.

Supply and fixing of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adhapor and back plate for housing of bulb Including providing of LED bulb of capacity 7/9 watt warm/ white colour type, complete all as specified and directed .

Supply and fixing of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete all as specified and directed .

Supply and fixing of LED mirror light fitting with high out put diffuuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set all as per existing fitting type/ size of sample /model and make and including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting and making electric connection, complete all as specified and directed.

S&F recessed / ceiling concealed mounted flat slim panel square shape with LED luminaire panel type fitting of size 600 mm x 600 mm of rating capacity in 35W/36/37 Watt 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light with driver, holder & LED lamps complete used for roof ceiling and required fitting use in both warm/white type colour complete set providing of suitable type of flat flexible two/three core cable and making electric connection, complete all as specified and directed.

Supply and fixing recessed/ceiling concealed mounted down lighter light fitting of round/Square flate shapes decorative type with high efficiency PMMA fiffuser soft glare free light with drivers & LED luminaire of rating capacity in 15 Watt to 18 Watt 220 volt AC complete light fitting set and also providing of suitable type of flate fexible two/three core cable and making electric, connection, complete all as specified and directed.

Supply and fixing of bldg LED street light fitting of rated capacity 25Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant with lense embeded including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attechment system of suitable bracket length of 1.0 mtr long and make to shape / bend of 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp alongwith nut bolt and including providing of suitable type of flate fexible two/three core cable and making electric connection, complete all as specified and directed.

Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415 volt 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 12 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical connection complete all as specified and directed.

Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 8 way type 220 volt AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical, complete all as specified and directed.

Supply and fixing of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed.

Supply and fixing of MCB SP 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed.

Supply and fixing of MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed.

Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 10 Sqmm and 1 Run of 10 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note: 3 runs of 10 Square mm cable and 1 run of PVC casing caping / PVCconduit with accessories shall be measured as 1 unit of running metre.

Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 6 Sqmm and 1 Run of 6 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall and making good all disturbed surfaces match to the existing surface complete all as specified and directed. Note: 3 runs of 6 Square mm cable and 1 run of PVC casing caping / PVCconduit with accessories shall be measured as 1 unit of running metre.

S&F star rated electric ceiling fan 1200mm sweep min air delivery 210 CFM with service value 6.0 BEE norms 5 star rating with bruhless direct current motor (BLDC) of single phase 230 volt AC alongwith blade, down rod, canopy, clamps with reel insulator, electronic regulator & accessories and MS fan hook fixed in ceiling/roof including providig flate flexible copper wire and making all electrical connection, complete all as specified and directed.

Supply fixing and comissiong and testing of star rated of electric ventilation exhaust fan of size 300mm sweep complete AC single phase 230 volt and made out of sturdy engineering plastic body complete with blade and louvers with shutter and also providing or making of suitable type/size of hole on wall out of any type of wall constraction work for installation /fixing of exhaust fan after fan fixing work making good to all diturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existing surface os wall/floor/ceiling etc by cement plastering work, complete all as specified and directed.

Supplying and fixing of flexible type round PVC bedded with PVC insulated and sheathed with multi FRLS cable of 1100 volt grade with multistranded copper conductor wire of size 1.5 Sq.mm 5 core type (Nominal area) ISI Marked, complete all as specified and directed

Supply and fixing of rigid non metalic PVC conduit of size 20 mm bore heavy duty with all fitting laid in trenches/ wall including providing clamping arrangment for holding of pipe on wall in proper size of clamps, nut bolt ,and washer etc complete all as specified.and directed

Supply and fixing in decorative wall mounting brushed nickle finish fixture with double opal glass difuser suitable for one Nos for green and one Numbers for red indication bulb B22 type complete fittings all as specified and directed .

S&F classy design for focusing hanging /pandant lights made of aluminium mild steel suitable for including 7/9 Watt Led rechargeable bulb, complete all as specified and directed.

Supply , fixing / laying in trenches/on wall/under path / road etc galvanised iron pipe of size 25 mm dia meidum class including all fitting with ISI marked including necessary fittings (Excavation / earthwork for pipe line joints, and shall be measured and paid for separately), complete all as specified and directed.

Supply and fixing brass gate /GM globe valve 25 mm dia bore with iron wheel head comlete in replacement for spigot/socket edns for GI pipe including cutting of pipes and insertion of union ISI marked complete all as specified and directed.

Cutting existing pipe upto 80 mm pipe line and connecting with 25 m dia pipe including fittings such as Tee, Bends, Reducer, tail pipe, socket, nut, bolt, rubber sheet gasket etc, complete all as specified and directed.

Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 35 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete, complete all as specified and directed.

M&L of Locally available river sand filling in trenches below and above / around UG cable for cable protection, in duct under and above the cables including punning around cable complete all as specified and directed. Note - Punned thickness shall only be measured and paid.

Supply and laying un-reinforced precast PCC cable Cover ISI marked, class LV, type-1, flat, size 250mm x 150mm x 40mm for covering cables laid dry flat as cable protection on sand, complete all as specified and directed.

S&F galvanised steel tubing light grade of size 40 mm bore, ISI marked, for protection of under ground cable on pole/wall/under road,complete all as specified and directed.

M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete all as specified and directed.

Supply, fixing, commissioning and testing of 3 star rated wall mounted split AC, dual invertor based with cooling and heating function and digital inverter type complete set of hi wall split type indoor and outdoor complete set of air conditioner unit with cardless remote control and full filling of initial refrigent gas alongwith having inbuilt heating and cooling arrangement and digital inverter twin rotary type compressor suitable for AC of rating capacity 1.5 TR and suitable for operation of 230Volt 50Hz single phase electric supply including provn of MS stand & bracket for fixing of outdoor and indoor unit system and also providing of both type /size sunction and discharge coper refrigerant piping attachment system of any length and duly both connected it from outdoor unit to indoor unit system alongwith duly overlapped it by nitrile insulation, with insulation taping work and suitable drain pipe line system upto ground level for dropping out the water outside from evaporator unit and making electric connection with three core copper cable of suitable size and making hole on wall / roof and making good all disturbed surface as per existing, complete all as specified and directed.

Description all as per serial item No 124 here-in-before, but of capacity 2 TR, complete all as specified and directed.

Supply, fixing, commissioning and testing of wall mounting hanging based automatic digital operation based voltage stabilizer with copper winding based unit of single phase naturally air cooled indoor type with having digital display and suitable for operation on single phase AC supply and with having designed voltage for input & output voltage 90 volt to 230 volt with accuracy +2.5% and having low and high voltage cut low voltage cut off 90 (-) 5 volts high voltage cut off 230 V (+5) Volts along with start time delay system with time delay adjustable from 30 second to 1.5 minutes system complete unit set of rating capacity 5 KVA, complete system all as specified and directed.

S&F sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting channel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection, complete all as specified and directed.

Supply, installation, Testing & Commissioning of Electric storage water heater (vertical type) 25 litres, with porcelain enamel glass lined inner tank 230 V, AC, Single phase, IS 2082 Marked, 5 Star rating, with 15mm brass non return valve and including connecting fasteners not less than 100 mm with suitable nut, bolt & washers grouted in walls with complete masonry work for proper mounting of Geyser fastenings bolts etc as directed as site reqmt and making necessary inlet and outlet water & electric connection tested on load including provision of PVC insulated & PVC sheathed copper conductor cable 2.5 sqmm 3 core upto 15 Amp plug point, complete all as specified and directed.

Supply and fixing of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting chanel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection, complete all as specified and directed

Alishan Builders (BID ID -3520251)

M/S TAJ DIN KHARI (BID ID -3519907)

M/S DFA Enterprises (BID ID -3519310)

M/S T A ENTERPRISES (BID ID -3520280)

RISING SUN ENGG WORKS (BID ID -3520167)

M/S Vivek Gupta and Co (BID ID -3519765)

M/S AIJAZ ENTERPRISES (BID ID -3520142)