MAINT CLEANING OF OHT UG SUMPS WATER CHANNEL/ REPLACMENT OF FILTER MEDIA AND REPAIR/ MAINT OF FIRE HYDRANT PUMP PIPE LINES/ CLEANING OF SWT AND CONNECTED ITEMS AT AF STN BHISIANA

Amount

REPAIR/ MAINT OF FIRE HYDRANT, PIPE LINES/ CLEANING OF SWT AND CONNECTED ITEMS.

Comprehensive maintenance of single channel four pipe Laser Aspiration detection unit . The unit should be UL and VDS approved complete with display of all alarm dual filter on board 20000 event log memory worth RS 232 port . The device should support minimum 100 m pipe for each channel and sensivity of 01%m complete all as specified and directed by Engineer in Charge. Note: The Contractor shall be responsible to replace all spare parts minor/major required to serviceabe of panel , Nothing extra shall be paid to during contract period, If he fail to rectify with 24 Hrs Recovery @ 1000 per day wiil be made in RAR/final Bill .

Comprehensive maintenance of repeater panel having display system of existing make and model suitable to incorporate in existing system having LOOP: Fire Red Lamp ON, Open Amber Lamp ON, Short Amber Lamp ON, Isolate Amber Lamp ON Monitor Mains ON 230VDC, Earth Line fault, BAT, low , BAT Discharge, CPU RUN-Processor working Controls: Lamp Test-Healthiness of lamp, Silence -tomute sounders Evacuate-evacuate the building, Re set - To restore system. Contractor shall visit each repeater panel prior quoting the rate to know the current status of respective Panel No claim on whatsoever account shall be entertained during current of work complete all as specified and directed by Engineer in Charge. Note: The Contractor shall be responsible to replace all spare parts minor/major required to serviceabe of panel , Nothing extra shall be paid to during contract period, If he fail to rectify with 24 Hrs Recovery @ 1000 per day wiil be made in RAR/final Bill.

Comprehensive maintenance of Microprocessor based panel 1 loop analogue addressble type fire alarm control panel with 80 character CD diaplay with battery backup of 11/2 hours access 500 events histrocial logging having loop Free red lamp on , Open Amber lamp ON, Short - Amber lamp On , Isolate - Amber Lamp On, Control : Lamp test-LED Healthy, Sielence - TO stop alarm, Evacuate - fire alarm ON, Reset-to Restore system, Monitor : mains ON-230 VAC, BAT ON-system at BAt, System ON -24 VDC, Xharger ON 27.3 VDC, Fire sounser ON, Silence - MUTE/ACK, Earth - Line Fault , BAT LOW -Bat Below 22 V. (P4) Note The Contractor shall be responsible to replace all spare parts minor/major required to serviceabe of panel , Nothing extra shall be paid to during contract period, If he fail to rectify with 24 Hrs Recovery @ 1000 per day wiil be made in RAR/final Bill.

S&F in replacement power supply units comprising of battery backup for 11/2 hours charging units , MCB DB and necessary MCB -power supply unit should have capacity to operate on 230 volt AC main input & provide 24 to 30 volts DC output for powering up The unit shall also supports battery backup in ase of AC main failure and should have built in charging circuit to batttery.suitable to existing make and model suitable to incorporate in existing system . Contractor shall visit each supply unit prior quoting the rate to know the current status of respective supply unit mechanism No claim on whatsoever account shall be entertained during current of work complete all as specified and directed by Engineer in Charge. (P 4)

S&F in replacement of analoge addressable photoe electric smoke detector with mounting based LED , address switch to programme the detector from 01-99 with BASE complete as required programme the detector rom 01-99 with BASE complete as required the contractor shall visit each photo electric smoke detector unit prior quoting the rate to know the current status of respective photo electric smoke detector mechanism No claim on whatsoever account shall be entertained during current of work complete all as specified and directed by Engineer in Charge.

S&F in replacement of addressable hooter with strobe for alaram annunciation along with all required accessories (Weather proof all as specified and as directed by Engr-in-charge. existing make and model suitable to incorporate in existing system. Note (a) The contractor shall check make and model before quoting of tender and inspect hooter unit prior quoting the rate to know the current status of respective hooter mechanism. (b) No claim on whatsoever account shall be entertained during current of work complete all as specified and directed by Engineer in Charge.

Taking down U/S & S&F of aspiration system address switch to programme the monitor modules from 01-09 complete as per OEM specification suitao ble existing make and model suitable to incorporate in existing system. Note (a) The contractor shall check make and model before quoting of tender and inspect monitor modules unit prior quoting the rate to know the current status of respective hooter mechanism. (b) No claim on whatsoever account shall be entertained during current of work complete all as specified and directed by Engineer in Charge.

Supply and Laying in replacement of , LT UG XLPE insulated 1100 volt grade heavy duty electric cables with aluminium conductor , cross sectional area 150 sqmm 3.5 core all as specified and directed. Note: The cost shall be included suitable size of steel gland , thimbles ,lugs required to jointing of cableall as specified and directed by Engr-in-charge.

Material & labour for replacement of Landing valve 63 mm including jointing with rubber insertion 3 mm thick bolts, nuts and washers etc complete all as specified and directed by Engr-in-Charge.

Material & Labour for replacement of RRL hose ISI marked with both coupling dia 63mm in 15mtr length complete all as specified and directed by Engr-in-Charge. (Alpha & Bravo)

S&F in replacement 19mm dia rubber braided hose of 36 mtr length with gate valve and shut of nozzle with working pressure of 12 bar and minimum flow rate 285 OM fixed in existing Hose reel drum of dia 565mm dia cast manual swinging type as complete. (Alpha & Bravo)

Taking down U/S & S&F in replacement Weather proof cabinet of size 900 x 600x 450mm made out of MS sheet 16 gauge having central opening and 4mm thick glass doors (2 Nos) suitably marked on the outside With Letters 'FIRE HOSE' cabinet with necessary locking arrangement including all fasterns etc and shutter shall be powder coated with signal red colour,shutter with frame fabricated all as specified and directed. Note: The hose cabinet will be fixed PCC Platform near the Fire Hydrant and cost of PCC flatform and fixing is deemed to be included in quoted cost.

S&F in replacement Female/Male Coupling with Blank Caps/Plugs of 63 mm of working pressure 10.5 Kg/Sqcm of Gun metal/Brass complete all as specified and directed by Engineer in charge. (Alpha & Bravo)

S&F in replacement flanged & shore connection of 63 mm outlet of material Gun metal/Stainless Steel with nuts, bolts washer etc complete all as specified and directed by Engineer in charge. (Alpha & Bravo)

S&F of in repair glass of fire hydrant boxes of size 60x60 mm incl rubber gasket/seal complete all as specified and directed by Engr-in-Charge. (Charlie)

Supply and install 120 AH, 24 V Maintenance free battery of make Exide/ Amco/ Amaron (As approved by GE), complete all as specified and directed by Engineer in charge.

M&L for cleaning of strainer all type and any size including dismantling and cleaning using Fernox DS-3 cleaner chemical or OEM recommendation and refixing of the same complete all as specified and as directed by Engr-in-charge

M&L for painting of fire hydrant stand post end flanged 1.5 mtr height with one end bend to 90 degree suitable for double fire hydrant valvesncluding 1 No CI duck foot bend 80 mm double end flanged and 1 no 80 mm 63mm reducer and 1 no 80 mm dia CI buerfly valve complete after removing all dust, dirt etc and clean the surface thoroughly with two coats of synthetic enamel paint including writing the complete all as specified and directed.

M&L for descaling and servicing the radiator of Diesel engine 62-73 BHP Cap internally and externally by using chemicals, including soldering the copper tubes and tank etc for arresting leakage complete all as specified and directed.

M&L for descaling and servicing the radiator of Diesel engine 43/52 BHP Cap internally and externally by using chemicals, including soldering the copper tubes and tank etc for arresting leakage complete all as specified and directed.

Material and labour for Drain the out lived engine oil, clean the oil tank and filling the new engine oil grade 20W 40 as required, complete all as specified and as directed.

Supply and filling coolent, complete all as specified and as directed.

M&L for Repairing the self Dynamo 12 Volts after removing from diesel engine set of any capacity and transporting to an authorised sevice centre complete all as specified and directed.

Taking out old U/S and Supply and fix CI body Sluice valve PN 1.6 conforming to IS of size 150 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size 150 mm complete all as specified and as directed by Engr-in-charge

Taking out old U/S and Supply and fix CI body Sluice valve PN 1.6 conforming to IS of size 100 dia complete with nuts,bolts,rubber gaskets etc including, including jointing material such as rubber gasket,bolts,nuts,etc suitable for size 100 mm complete all as specified and as directed by Engr-in-charge

Taking out old U/S and Supply and fix CI body Sluice valve PN 1.6 conforming to IS of size 80 dia complete with nuts,bolts,rubber gaskets etc including, including jointing material such as rubber gasket,bolts,nuts,etc suitable for size 80 mm complete all as specified and as directed by Engr-in-charge

Taking out old U/S and Supply and fix CI body Sluice valve PN 1.6 conforming to IS of size 50 dia complete with nuts,bolts,rubber gaskets etc including, including jointing material such as rubber gasket,bolts,nuts,etc suitable for size 50 mm complete all as specified and as directed by Engr-in-charge

Taking out old U/S and Supply and fix CI body NRV valve conforming to IS of size 150 dia complete with nuts,bolts,rubber gaskets etc including, including jointing material such as rubber gasket,bolts,nuts,etc suitable for size complete all as specified and as directed by Engr-in-charge

Taking out old U/S and Supply and fix CI body NRV valve conforming to IS of size 100 dia complete with nuts,bolts,rubber gaskets etc including ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size complete all as specified and as directed by Engr-in-charge

Taking out old U/S and Supply and fix CI body NRV valve conforming to IS of size 50 dia complete with nuts,bolts,rubber gaskets etc including ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size complete all as specified and as directed by Engr-in-charge

Taking out U/S battery cell 7 Supply and fix New battery cell 12 V 7 AH , Charging voltage ; Stand by 13.5 V Cyclic : 14.7 V 0f make Amaron/Exide/ Luminoous, complete all as specified and as directed by Engr-in-charge

S&F in replacement of GI pipe and fix MS ERW pipe nominal dia 100 mm as per IS 3589 (1981) thickness 5.0 mm , including special joints complete for delivery and side including necessary nuts bolts and rubber etc, complete with one coat of red oxide and two coat of black paint on ms pipe complete all as specified and as directed by Engr-in-charge. Note The cost shall be inclusive for making suction/delivery pipe from existing pipe from pump to SWT pipe line for delivery including welding , bending work .,socket, union , bend etc, bend

S&F in replacement of GI pip and fix MS ERW pipe nominal dia 80 mm as per IS 3589 (1981) thickness 5.0 mm , including special joints complete for delivery and side including necessary nuts bolts and rubber etc, complete with one coat of red oxide and two coat of black paint on ms pipe all as specified and as directed. Note: - The cost shall be inclusive for making suction pipe from existing pump to SWT for connection of varios sizes of DI/GI pipe line for delivery including welding , bending work .

Taking down U/S & Supply and fix CI body foot valve ISI marked of size 150 dia complete with nuts,bolts,rubber gaskets jointing material suitable for size 150 mm complete all as specified and as directed by Engr-in-charge

Taking down U/S & Supply and fix CI body foot valve ISI marked of size 80 dia complete with nuts,bolts,rubber gaskets jointing material suitable for size 80 mm complete all as specified and as directed by Engr-in-charge

Taking down U/S & Supply and fix CI body foot valve ISI marked of size 100 dia complete with nuts,bolts,rubber gaskets jointing material suitable for size 80 mm complete all as specified and as directed by Eng-in-Charge

S&F Mechanical joint suitable for 150 mm bore CI pipe ,inluding cutting pipe excavation & earth work etc, nuts, bolts and washers complete all as directed by Engr-in-Charge.

S&F Mechanical joint suitable for 50/40 mm bore CI pipe ,inluding cutting pipe excavation & earth work etc, nuts, bolts and washers complete all as directed by Engr-in-Charge.

M&L for run lead joints for 150mm dia spigot and socketed CI pipe fittings including spun yarn etc. complete all as specified and as directed by Engr-in-charge

M&L for run lead joints for 100mm dia spigot and socketed CI pipe fittings including spun yarn etc complete all as specified and as directed by Engr-in-charge

M&L for run lead joints for 80mm dia spigot and socketed CI pipe fittings including spun yarn etc. complete all as specified and as directed by Engr-in-charge

Dismantling the Electric Induction Motor / submersible motor AC, 3 Phase, 415 Volts from the foundation/ Blast pen SWT of depth of 5-10 mtr Capacity 5 HP by disconnection of Cable and coupling connection of Pump and shifting to the Civil Workshop for the following repair / replacement work complete all as specified and directed by Engr-in-Charge:- (a) Replacement of ball bearing NBC or as per exsting make/ model with providing of high grade grease. (b) Re- assembling the complete motor and shifting to the same to its existing location and re-connection all cable and coupling and testing the same on load all as directed by Engr-in-Charge. (BP-6-10)

All as per item No. 1.042 above but having 10 HP capacity submersible motor complete all as directed by Engineer in Charge.

All as per item No. 1.042 above but having 20 HP capacity motor complete all as directed by Engineer in Charge.

All as per item No. 1.042 above but having 40 HP capacity motor complete all as directed by Engineer in Charge.

S&F in replacement of CI fittings bend (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket) etc Tee pieces single branch "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs of size upto 150mm complete all as specified and directed.

S&F in replacement of Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 50 mm bore iron pipe and fixed including testing complete all as specifed and directed by Engr-in-Charge.

All as per item No. 1.047 above but having size 40 mm dia bore complete all as specifed and directed by Engr-in-Charge.

All as per item No. 1.047 above but having size 25 mm dia bore complete all as specifed and directed by Engr-in-Charge.

S&F in replacement of Rubber coupling TC-16/TC-14 suitable for 40 HP Centrifugal pump complete all as specified and directed by Engr-in-Charge.

S&F in replacement Contactor 160A , 415 VAC, 50 Hz complete as per existing Make HPL complete all as specifed and directed by Engr-in-Charge.

S&F in replacement Thermal over load relay 9- 32 A, 415 V, 50 Hz as per existing Make & Type complete all as specifed and directed by Engr-in-Charge.

S&F in replacement of Electronic timer Star-Delta of 3S-120 Second as complete all as specifed and directed by Engr-in-Charge.

S&F in repairs MCCBs 400 Amps, 4 Pole having rupturing capacity 36KA, 415 volts including termination point for connection complete all as specified and directed. (P4)

S&F in repairs MCCBs 250 Amps, 4 Pole having rupturing capacity 25KA, 415 Volts including termination point for connection complete all as specifed and directed by Engr-in-Charge.(Charlie)

S&F in repairs MCCBs 100 Amps, 4 Pole having rupturing capacity 16KA, 415 volts including termination point for connection complete all as specifed and directed by Engr-in-Charge. (Bravo)

S&F in repairs MCCBs 63 Amps, 4 Pole having rupturing capacity 16KA, 415 volts including termination point for connectioncomplete all as specifed and directed by Engr-in-Charge.

Dismantling/taking down the centrifugal pump set of capacity 40 HP from foundation after disconnecting of discharge, suction and induction motor connection and shifting to the same to Civil Workshop at Bathinda for the following repair :- (a) Dismantling the complete pump and taken out main shaft and impeller from the pump by disconnection of all nuts, bolts and washers and minor repair and balancing of main shaft and impeller by necessary lathe and machine work and replacement with complete new gasket and mild steel nut, bolt , check nut and washer complete all as directed. (b) Replacement of ball bearing NBC 6312 including providing of required grease complte 02 Nos. (c) Re-assembling the complete and fixing at site and connection of suction, discharge and the induction motor and testing the same on full load complete all as specifed and directed by Engr-in-Charge.

All as above but 20 HP capacity of pump complete all as specifed and directed by Engr-in-Charge.

All as above but 10/7.5 HP capacity of pump complete all as specifed and directed by Engr-in-Charge.

M&L for replacement of Pump motor coupling fully suitable for 40 HP pump with rubber bushes complete all as specifed and directed by Engr-in-Charge.

M&L for replacement of Pump motor coupling fully suitable for 20/10 HP pump with rubber bushes complete all as specifed and directed by Engr-in-Charge.

M&L for replacement of UNSV rubber insertion packing suitable for 200mm CI foot valve/suction pipe flanged incl replacement of UNSV nut and bolts.

M&L for preparation of old painted surface of Fire Hose Cabinet of any size by scratching /rubbing down the old paint by wire brush or emery paper and applying two coat of Red oxide Paint (weather proof and rust resistant) etc. complete all as specifed and directed by Engr-in-Charge.

M&L for preparation of old painted surface of 40 HP Centrifugal Pump and motor by scratching /rubbing down the old paint by wire brush or emery paper and applying two coat of synthetic enamelecd paint etc. complete all as specified and directed.

M&L for preparation of old painted surface of 10 to 20 HP Centrifugal Pump and motor by scratching /rubbing down the old paint by wire brush or emery paper and applying two coat of synthetic enamelecd paint etc. complete all as specifed and directed by Engr-in-Charge.

Supply and install horizontal submersible pump set 5 HP 3 Phase 415 Volt, 2880 RPM, Discharge 210 LPM at 35M head suitable for water fountain, complete all as specified and directed by Engineer in Charge.

M&L for servicing of Diesel Engine of 52/60 BHP with replacement of fuel filter any size as per existing - 1 Set, Air filter - Each, Oil/Lubricant Filter - Each, Engine Oil- 10 Ltr, Coolant up to max level, hose pipe as per existing - Set of two, Battery Terminal - Set of Two, Fuel Pipe fuel Tank to Fuel Filter with Clamp-Each and Radiator cleaning complete all as specifed and directed by Engr-in-Charge. (ATC/ Igloo)

M&L for Repairing the self starter after removing from the Diesel Engine set of capacity 52/60 BHP and transporting to an authorised sevice centre complete all as specified and directed.

M&L for repairs to gate and replacement of spindle suitable for 150mm sluice valve complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Gland Dori suitable for pump set any capacity complete all as specifed and directed by Engr-in-Charge.

S&F in replacement of High Grade Grease for Pump Set and Motor complete all as specifed and directed by Engr-in-Charge.

S&F in replacement of NRVTikki suitable for 150/100 mm bore NRV complete all as specifed and directed by Engr-in-Charge.

M&L for attending complaint day to day like , tightning of nut bolot, finding of leakge in pump any type , cheking of starting of diesel driven pump , checking of battery thimbles, priming work using seprate submersible pump or tanker mounted vehicle for filling of suction/ delivery pipe with water and checking of serviceablity of pump and opening of valve /NRV with nut bolt finding of leakage in sluice/gate valve / NRV removing of air release from pump and operating of pump and checking pump is lifting of water with force or not if not then priming of pump with water and find the fault and rectify the fault of pump , if not lifting of water then replace galnd rope and water seal given in schedule, if battery is found discharge the contractor remove battery from mechanical hydrant pump and transport to workshop for charginf purpose and after full charge of battery the contractor again transport from work shop to pump and install in pump house and start the engine up to satisfaction of Engr-in-charge . The motor of mechanial hydrant pump/ Electrical operated pump any capacity installed at Bravo / Alpha, Charlie P-IV fire hydrant pump house stopping leakege of GI Pipe upto 150 mm dia by replacing any type of (bend, tee, elbow, reducer, end plug, taper, union, nipple, socket etc) all as specified and directed by Engr-in-Charge

Taking out unservicable iron made nozzle and Supply and fix brass nozzle of size 1/4 " dia suitable for fountain. the cost shall be deemed to fixing of nozzle with suitable size of socket nozzole welded in existing pipe in foutain complete all as specified and directed by Engineer in Charge.

Taking out unservicable brass nozzle and Supply and fix brass nozzle of size 20 mm dia " dia suitable for fountain complete all as specified and directed by Engineer in Charge.

Taking out unserviceable and S&F under water LED lights lumiplus V1 PAR56 16/20Watt and niche. Make : Astral, Haywards, Leisure Pool. (multicolour) water proof luminaries with of high out put of LEDs housed in complete enclosure of stainless steel body toughened glass with elastomer seal special plastic cable gland compact socket head fastners and mounting bracket are all of stainless steel provided for aiming the object all as specified and directed as per sample kept in AGe E/M Office.

Taking out U/s & Supply and fix LED light 15 /20 watts and RGB (multicolour with remote ) water proof luminaries ip 65 protection with of high out put of LEDs housed in complete enclosure of stainless steel body toughened glass with elastomer seal special plastic cable gland compact socket head fastners and mounting bracket are all of stainless steel provided for aiming the object all as specified and directed.

Taking out unservicable aluminium, cable of size 2.5 and Supply and fix 3 core 2.5 sqmm cable PVC insulated and sheathed sumersible type with stranded copper conductor complete all as specified and directed by Engineer in Charge.

Taking out unservicable aluminium cable of size 1.5 sqmm and Supply & fix flexible cable 1.5 sqmm 3core PVC insulated and sheathed submersible type with stranded copper conductor complete all as specified and directed by Engineer in Charge.

Taking out unservicable starter and Supply and fix Single Phase Motor Starter with suitable arrangements for floor mounted Single Phase DOL starter with suitable arrangement for cubical type, for indoor type use, floor mounted, factory fabricated, dust, weather & vermin proof, powder coated, made out of CRCA sheet of 2.15 mm thick and angle iron legs of size 50 mm x 50mm x 5mm with front openable with locking arrangements and single phase Motor Starter DOL in sheet steel enclosure suitable for capacity submersible pump with relay range 23-32 Amps -CAT No BE1SDA4025MU253 of Make C&S / SS96560 L&T Note : The cost of PCC foundation shall be deemed to be included in this item rate (Igloo).

M&L for cleaning of /SWT at blast pan of size 40 mtr dia and depth of 10 mtr by pumping out the water below foot valve and cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and pumping out soiled water complete including writting the capacity and date of cleaning with white paint over black painted surface. The cutting of Grass with root upto depth of 30 cm below ground level around 10mtr of tank of SWT complete in all respect and as specified and directed by Engineer in Charge. (Peroidity ad directed by Engr-in-Charge)

M&L for cleaning of fountain of size 63 mtr dia and depth of 1 mtr by pumping out the water below foot valve and cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and pumping out soiled water complete including writting the capacity and date of cleaning with white paint over black painted surface in all respect and as specified and directed (Peroidity ad directed by Engr-in-Charge

All as above item no 1.085 but for cleaning of fountain of size of stepped type 10 mtr X 15mtr X 10mtr mtr, complete all as specified and directed by Engineer in Charge.

All as above ityem no 1.085 but for cleaning of fountain of stepped type 5 mtr X 10mtr X 10mtr, complete all as specified and directed by Engineer in Charge.

Dismantling monoblock pump set 01 HP to 5 HP 3 phase 415 V from foundation base plate after isolating the electric and earth lead connections, suction and delivery pipes etc opening the pump set, motor rotar and statar etc for repair/overhauling and varnishing and baking the stater winding to enhance the insulation level and reassemblying the pumpset and reinstalling on foundation frame connecting, testing and commissioning complete all as directed by Engineer in Charge. Note :- All spares shall be measured as supply only under seperate items

(a) Pump shaft sleeve made out of gun metal

(b) Key for main shaft/impeller

(c) Check nut

(d) Water seal

(e) Ball bearing complete existing size ISI marked

Dismantling submersible pump set type up to 10 HP 3 phase 415 V from existing location after isolating the electric and earth lead connections, suction and delivery pipes etc opening the pump set, motor rotar and statar etc for repair/overhauling and varnishing and baking the statar winding to enhance the insulation level and reassemblying the pumpset and reinstalling on foundation frame connecting, testing and commissioning complete all as specified. Note :- All spares shall be measured as supply only under seperate items

a) Cast iron impeller

b) Bearing suitable for existing submersible pump

c) bush

d) Water seal

(e)Key for main shaft/impeller

Dismantling submersible pump set type up to 5 HP 3 phase 415 V from existing location after isolating the electric and earth lead connections, suction and delivery pipes etc opening the pump set, motor rotar and statar etc for repair/overhauling and varnishing and baking the statar winding to enhance the insulation level and reassemblying the pumpset and reinstalling on foundation frame connecting, testing and commissioning complete all as specified. Note :- All spares shall be measured as supply only under seperate items

a) Cast iron impeller

b) Bearing suitable for existing submersible pump

c) bush

d) Water seal

M & L for Rewinding of pump motor 415 Volt 3 phase after disconnecting electric cable and earth lead, suction and delivery pipes, shifting to work shop, dismantling the motor assembly and removing the burnt out copper winding of stator rotor and cleaning the stator slotsand rotor and core assembly, rewinding to stator and rotor suitable gauge super enamelled copper wire with insulating papers and insulation cloths, varnishing the winding and baking heating for achieving the required insulation resistance, re-assembling the motor and testing complete, incl transporting back to site and fixing motor to its original place, reconnecting electric cable and earth leads etc testing and commissioning complete in all respect all as specified and as directed by Engr-in-charge for the up to 7-10 HP capacity

All as above but 10-15 HP

All as above but 40 HP

S&F in repair for wiring with flexible cable 0.5 sqmm 3core PVC insulated and sheathed sumersible type with stranded copper conductor (for Light), complete all as specified and directed by Engineer in Charge.

Material and Labour for Disconnecting the existing 150/200/mm DI/CI pipe ,suction and delivery of any type from the pump set and supply and fixing with new NRV and foot valve of size 150/200 mm bore given in schedule and again connecting of the same with leak proof joint of pipe after fixing of NRV/Foot valve all as specified and directed. Note :- The cost shall be included nut bolt, Rubber packing/gasket, Tee, Flange, Mehanical joint, Collar , nipple, union, weldign work or lead joint etc

Supply & Fixing/Laying of 40 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches/wall and ceiling or laid in floors, complete all as specified and directed by Engineer in Charge.

Supply & Fixing/Laying of 25 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches/wall and ceiling or laid in floors, complete all as specified and directed by Engineer in Charge.

Supply & Fixing/Layingt of 50 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches/wall and ceiling or laid in floors, complete all as specified and directed by Engineer in Charge.

M & L for Excavation in trenches, not exc 1.5 m wide and not exc. 1.5 m in depth and getting out hard/dense soil all as specified and as directed.

M & L for returning filling in including spreading, levelling, watering and ramming in layers not exceeding 25 cm thick with earth obtained from excavation all as specified and as directed.

M & L for removal of surplus soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and as directed.

M&L Fazilka sand as in sand cushioning to under ground cable including punning down all as directed by Engr-in-Charge

M&L for Brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed.

M&L for suction sweeper filter pump booster self priming circulation pump centrifugal type water pump single phase 15 metre head having discharge 2000 LPH Hrs having arrangement of in let out let nipple at both side alongwith side, complete all as specified and directed by Engineer in Charge. Make: KIRLOSKAR/ JOTI/ CROMPTON GREAVES.

Supply & Fixing/Laying of 20 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches/wall and ceiling or laid in floors, complete all as specified and directed by Engineer in Charge.

Supply & Fixing/Laying of 15 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches/wall and ceiling or laid in floors, complete all as specified and directed by Engineer in Charge.

Taking up or down U/S GI/PVC tubing and connections of size 40/50 mm, complete all as specified and as directed by Engineer in Charge.

Taking up or down U/S GI/PVC tubing and connections of size 25 mm, complete all as specified and as directed by Engineer in Charge.

Taking up or down U/S GI/PVC tubing and connections of size 20 mm, complete all as specified and as directed by Engineer in Charge.

Taking up or down U/S GI/PVC tubing and connections of size 15 mm, complete all as specified and as directed by Engineer in Charge.

M&L for cleaning of /SWT at blast pan of size 25 mtr dia and depth of 10 mtrby pumping out the water below foot valve and cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and pumping out soiled water complete including writting the capacity and date of cleaning with white paint over black painted surface. The cutting of Grass with root upto depth of 30 cm below ground level around 10mtr of tank of SWT complete in all respect and as specified and directed by Engineer in Charge. (Peroidity ad directed by Engr-in-Charge)

REPAIR/ MAINT OF FIRE HYDRANT PUMP, PIPE LINES/ CLEANING OF SWT AND CONNECTED ITEMS.

M&L for Scraping out silt algae, vegetation from sloping side wall (brick pointing type) of raw water tanks by using broom, steel wire brush and washing the side walls with bleaching powder solution etc, complete all as specified and directed by Engineer in Charge. Dewatering & Cleaning of Under Ground Treated Water Sump of Capacity 200,000 Gallons involving the following cleaning process and complete all as directed by the Engineer-in-Charge :- (a) De-watering shall be carried out by using high pressure Water Jet Machine complete all as directed. (b) Total Removal of all masses, algae, dirt including removal of dirty water/ Mud/ Mudy Water at locations as directed by Eingineer in Charge. (c) Scrubbing of Internal Surfaces and Cleaning of Walls, Ceiling & Floors with wire Brush by applying Bleaching powder and again clean with Fresh Water repeatedly by using high pressure Jet Pump complete all as directed. (d) Pumping Out/ Removal of all dirt particles including muddy water, Fungus struck on its surfaces and sludge as directed. (e) Applying One coat of Anti-bacterial Sterlization Spray to walls, Floors & Ceiling including external surface of reserviours which is effective against all pathogens all as directed. (f) Cutting & Removing of Vegetation growth from the periphery of the tank and its vicinity at a radius not less than 10 Metre, complete all as Note: (01) Rate shall be inclusive for all T&P/Materials required for dewatering and nothing will be paid extra on this account. (02) The contractor shall be deployed man power to clean the sump as per requirement given by Engineer in Charge in works site order book. If they failed to clean in within time frame, the payment shall not be made to contractor and the recovery shall be made @ Rs 700 per day till execution. (03) Unit rate quoted by contractor includes all lightning arrangements, safety arrangements for cleaning shall be arranged by the contractor.

All as per item No. 2.01 above but 100,000 gallons capacity Over Head reservoir on 18.50 Metre staging. (OMQ) Mandir/Silver

All as per item No. 2.01 above but 50,000 gallons capacity Over Head reservoir on 18.50 Metre staging. (KV / Pichora)

All as per item No. 2.01 above but 60,000 gallons capacity Over Head reservoir on 18.50 Metre staging.(NCE 17 SQN)

All as per item No. 2.01 above but 40,000 gallons capacity Undergound Sump reservoir.(Mini Pump/Ahuja/MAP SMQ)

M&L for removing of mud and sludge from the tank by manually and Scraping out silt algae, vegetation from sloping side walls(brick pointing type) of raw water tanks by using broom, steel wire brush and washing the side walls with bleaching powder solution etc complete all as specified and directed by Engr-in-Charge. The Dewatering of water up to the bottom level and Cleaning of Reservoir/Underground Sump of 100,000 Gallons capacity (Level Tank) involving the following cleaning process and complete all as directed by the Engineer-in-Charge :- (a) De-watering up to bottom level shall be carried out by using high pressure water jet complete all as directed. (b) Total Removal of all masses, algae, dirt including removal of dirty water/ Mud/ Mudy Water by Suction Jet Pumps up to a safe distance not exc 100 Mtr from Sump as directed by Engineer in Charge. (c) Scrubbing of Internal Surfaces and Cleaning of Walls, Ceiling & Floors with wire Brush by applying Bleaching powder and again clean with Fresh Water repeatedly by using high pressure Jet Pump complete all as directed. (d) Pumping Out/ Removal of all dirt particles including muddy water, Fungus struck on its surfaces and sludge by Vacuum Pump specially designed all complete. (e) Applying One coat of Anti-bacterial Sterlization Spray to walls, Floors & Ceiling which is effective against all pathogens all as directed. (f) Cutting & Removing of Vegetation growth from the periphery of the tank and its vicinity at a radius not less than 10 Metre, complete all as Note: (01) Rate shall be inclusive for all T&P/materials required for dewatering and nothing will be paid extra on this account. (02) The contractor shall be deployed man power to clean the sump as per requirement given by Engineer in Charge in works site order book. If they failed to clean in within time frame, the payment shall not be made to contractor and the recovery shall be made @ Rs 700 per day till execution of work. (03) Unit rate quoted by contractor includes all lightning arrangements, safety arrangements for cleaning shall be arranged by the contractor.

M&L for Pumping out the water from raw water tank of size 80mx80mx5.17m of water capacity 50 Lakh gallon to another tank upto top of mud sludge/contaminated muddy water with the help of Eletric Motor & Pump Set upto entire satissfaction of Engineer-in-Charge. NOTE :- Rate shall be inclusive for all T&P/material required for dewatering and nothing will be paid extra on this account..

M&L for removing out of all mud and sludge from the tank by manually and Scraping out silt algae, vegetation from sloping side walls(brick pointing type) of raw water tanks by using broom, steel wire brush and washing the side walls with bleaching powder solution etc complete all as specified and directed by Engr-in-Charge. M&L for Dewatering & Cleaning of Reservoir having capacity of 50,00,000 Gallons capacity involving the following cleaning process and complete all as directed by the Engineer-in-Charge :- (a) De-watering up to bottom level shall be carried out by using high pressure Water Jet Pump complete all as directed. (b) Total Removal of all masses, algae, dirt including removal of dirty water/ Mud/ Mudy Water by using high pressure Water Jet Pump up to a safe distance minimum 1000 Mtr from Reservoir Boundary as directed by Engineer in Charge. (c) Scrubbing and Cleaning of Walls & Bottoms of reservoir with wire Brush by applying Bleaching powder and again clean with Fresh Water repeatedly by using high pressure Jet Pump complete all as directed as per satisfaction of Engineer in Charge. (d) Applying One coat of Weather Proof Cement Base Paint on surafces of walls and bottoms of reservoir complete all as directed. (f) “Date of Cleaning” and capacity of tank should be written with white paint over black painted surface in all surfaces including scrubbing of internal surfaces and cleaning of walls, floors which dislodge the layer opf dirt, fungus struck on its surface and applying Anti-bacterial Sterlization Spray to walls, Floors & Ceiling with the help of electric motor & pump set upto entire satisfaction of Engineer in Charge. Note: (01) Rate shall be inclusive for all T&P/materials required for dewatering and nothing will be paid extra on this account. (02) The contractor shall be deployed man power to clean the tank as per requirement given by Engineer in Charge in works site order book. If they failed to clean in within time frame, the payment shall not be made to contractor and the recovery shall be made @ Rs 700 per day till execution of work. (03) Unit rate quoted by contractor includes all lightning arrangements, safety arrangements for pumping shall be arranged by the contractor.

M&L for Scraping out silt algae, vegetation from sloping side wall (brick pointing type) of raw water tanks by using broom, steel wire brush and washing the side walls with bleaching powder solution etc, complete all as specified and directed by Engineer in Charge. M&L for Cleaning and desludging of floculator cum sedimentation tank of 14.60 Mtr dia and 3mtr height including drain out of water from the tank to sludge cell and removing of sand/mud and sediment of alum from the bottom portion of the tank (1.70 metr depth) and taken out the sludge/mud from the tank with high pressure water jet to remove all masses,algae,dirt and removal of dirt with wire brush by applying bleaching powder and cleaning entire surface repeatedly with fresh water and pumping out soiled ,muddy water from tank complete water along with sludge by Vacuum Pump specially designed and disposal of the same to a safe distance as directed by Engineer in Charge. Note: 01 Rate shall be inclusive for all T&P/materials required for dewatering and nothing will be paid extra on this account. (02) The contractor shall be deployed man power to clean the tank as per requirement given by Engineer in Charge in works site order book. If they failed to clean in within time frame, the payment shall not be made to contractor.

M&L for Scraping out silt algae, vegetation from sloping side wall (brick pointing type) of raw water tanks by using broom, steel wire brush and washing the side walls with bleaching powder solution etc, complete all as specified and directed by Engineer in Charge for Cleaning and desludging of sludge tank of size 11mx9mx3m including pumping out the muddy water from the tank and removing of inludge/mud from the bottom portion of the tank (1.10 Mtr depth) with high pressure water jet to remove all masses,algae,dirt and removal of dirty water along with sludge using sludge machine and disposal of the same to a safe distance as directed and including scrubbing of internal surfaces and cleaning of walls,floors & ceiling which dislodges the layers of dirt, funges struck on its surface and applying one coat of Anti-bacterial sterlization spray to walls, floors & ceiling external surfaces of reservoirs complete all as directed. using sludge machine as directed. Note: (01) Rate shall be inclusive for all T&P/materials required for dewatering and nothing will be paid extra on this account. (02) The contractor shall be deployed man power to clean the tank as per requirement given by Engineer in Charge in works site order book. If they failed to clean in within time frame, the payment shall not be made to contractor and the recovery shall be made @ Rs 700 per day till execution of work.

M&L for Pumping out sewage water/sludge from the sewage sump No 02 , size of under ground sump , 10 Metre depth and 09 Metre dia of sump UG and deliver to oxidation pond upto level (2 meter) of mud sludge/sewage debris and taking out sludge in liquid or in solid contents from the sewage sump to up to depth of 10 mtr mechanially using with high pressure sludge cutter machine or any other eqpt require to clean and remove all masses,algae,dirt / hard sludge / mud and including scrubbing of internal surfaces and cleaning of walls,floors & ceiling which dislodges the layers of dirt, funges struck on its surface and applying Anti-bacterial sterlization spray to walls, floors & ceiling and disposal of removed sludge out side the defence land in closed containers including two coats of white wash with bleaching powder on walls of sump and writing date of cleaning complete all as specified and directed by Engr-in-Charge NOTE :- (a) Rate shall be inclusive for all T&P/material required for dewatering and nothing will be paid extra on this account.The rate shall included taking out debries and solid sludge from site and deposited 1.5 KM away from site. (b) The contractor will be deployed man power to clean the sump as per periodicity given by Engineer in Charge in works site order book. If they failed to clean in within time frame, the payment shall not be made to contractor and the recovery shall be made @ Rs 700 per day till execution of work. (c) The rate shall be included temporary arrangemnent of storage tank of sludge/sewage during cleaning of or making of by pass arrangement of sludge from Sewage sump No 02 to oxidation ponds, Sewage pipe cutting and maiking by pass pumping arrangement etc during cleaning of UG sump or excavation removal returning required to install temporary sludge storage tank at site for cleaning period nothing will be paid extra. (d) Unit rate quoted by contractor includes all lightning arrangements, safety arrangements for pumping shall be arranged by the contractor.

M&L for Pumping out sewage water/sludge from the sewage sump No 01 of size 09 mtr depth and 08 mtr dia of sump UG and deliver to oxidation pond upto level (2 meter) of mud sludge/sewage debris and taking out sludge in liquid or in solid contents from the sewage sump to any 09 mtr machinally or using with high pressure sludge cutter machine or water jet machine to remove all masses,algae,dirt and removal of dirty water along with sludge using sludge machine and including scrubbing of internal surfaces and cleaning of walls,floors & ceiling which dislodges the layers of dirt, funges struck on its surface and applying Anti-bacterial sterlization spray to walls, floors & ceiling and disposal of removed sludge out side the defence land in closed containers including two coats of white wash with bleaching powder on walls of sump and writing date of cleaning complete all as specified and directed by Engr-in-Charge NOTE :- (a) Rate shall be inclusive for all T&P/material required for dewatering and nothing will be paid extra on this account.The rate shall included taking out debries and solid sludge from site and deposited 1.5 km away from site ,Transportation cost is also included. (b) The contractor will be deployed additional man power and plant and machinery to clean the sump as directed by Engineer in Charge. If he failed to clean in given time period , the payment will not be made to contractor. (c) The rate shall be included temporary arrangemnent of storage tank of sludge during cleaning of or making of by pass arrangement of sludge from 01 Sewage pump to 02 Sewage sump and same from Sewage pump 02 to oxidation ponds, Sewage pipe cutting and maiking by pass pumping arrangement etc during cleaning of UG sump or excavation removal returning required to install temporary sludge storage tank for cleaning period nothing will be paid extra (d) Unit rate quoted by contractor includes all lightning arrangements, safety arrangements for pumping shall be arranged by the contractor.

M&L for Cleaning bed by wire brush on floor wall sides, channel of the Empty filter bed Air hole,with high pressure water jet to remove all masses,algae,dirt and removal of dirty water and including scrubbing of internal surfaces and cleaning of walls,floors & ceiling which dislodges the layers of dirt, funges struck on its surface and connecting pipe to make bed free from floor vegetation on the same bed filter compartment of size 4.0mx 4.0m x3.0m and disinfecting by disinfecting material etc complete all as specified by Engineer-in-Charge. Note: (01) Rate shall be inclusive for all T&P/materials required for dewatering and nothing will be paid extra on this account. (02) The contractor will be deployed additional man power to clean the sump as per periodicity given by Engineer in Charge in works site order book. If they failed to clean in within time frame, the payment shall not be made to contractor.

M&L for painting by bluse paint of incoming and delivery pipe line 150/200 mm dia of CI/DI pipe line at the height of 20 mtr OHT ( Total OHT 07 Nos) and writing the details of tank with two coats of synthetic enamel paint complete all as specified and directed by Engineer in charge. Note: The quoted unit rate shall include provision of scaffolding for painting on OHT incoming & Delivery pipe line upto a height of 20 Metre including M&L for erecting with steel structure for repairing/ painting work on OHT and removing of scaffolding/ Steel structure including transportation & labour arangement for removing all dust, dirt etc. from the site as directed by Engineer in Charge.

M&L for Cleaning to back wash line in side the filter bed externally by scraping and by cleaning the air holes by drill machine/Air blower and making the pipe valley cleaned and functional & applying two coats of synthetic enamel paint on the metal pipes including preparation of surface etc complete all as specified by Engr-in-Charge.

M&L for Dewatering & Cleaning of underground (old)Treated water Sump of 1,50,000 Gallons capacity involving the following cleaning process and complete all as directed by the Engineer-in-Charge :- (a) De-watering shall be carried out by using high pressure water jet machine complete all as directed. (b) Total Removal of all masses, algae, dirt including removal of dirty water/ Mud/ Mudy Water by Suction Jet Pumps complete all as directed. (c) Scrubbing of Internal Surfaces and Cleaning of Walls, Ceiling & Floors with wire Brush by applying Bleaching powder and again clean with Fresh Water repeatedly by using high pressure Jet Pump complete all as directed. (d) Pumping Out/ Removal of all dirt particles including muddy water, Fungus struck on its surfaces and sludge by Vacuum Pump specially designed all complete. (e) Applying One coat of Anti-bacterial Sterlization Spray to walls, Floors & Ceiling which is effective against all pathogens all as directed. (f) “Date of Cleaning” should be written over the outer surface of Tank with Synthetic Enamel Paint with lettering not less than 100mm height as directed by Engineer in Charge. (g) Cutting & Removing of Vegetation growth from the periphery of the tank and its vicinity at a radius not less than 10 Metre, complete all as Note: (01) Rate shall be inclusive for all T&P/materials required for dewatering and nothing will be paid extra on this account. (02) The contractor will be deployed additional man power to clean the sump as per periodicity given by Engineer in Charge in works site order book. If they failed to clean in within time frame, the payment shall not be made to contractor and the recovery shall be made @ Rs 700 per day till execution of work. (03) Unit rate quoted by contractor includes all lightning arrangements, safety arrangements for pumping shall be arranged by the contractor.

M&L for Cleaning and desludging of backwash tank on over bldg of size 11mx3mx1.5 m including pumping out the muddy water from the tank and removing of inludge/mud from the bottom portion of the tank with high pressure water jet to remove all masses,algae,dirt and removal of dirty water along with mud/sand using pressure jet machine and disposal of the same to a safe distance as directed and including scrubbing of internal surfaces and cleaning of walls,floors & ceiling which dislodges the layers of dirt, funges struck on its surface and applying one coat of Anti-bacterial sterlization spray to walls, floors & ceiling external surfaces of reservoirs Note: (01) Rate shall be inclusive for all T&P/materials required for dewatering and nothing will be paid extra on this account. (02) The contractor will be deployed additional man power to clean the sump as per periodicity given by Engineer in Charge in works site order book. If they failed to clean in within time frame, the payment shall not be made to contractor and the recovery shall be made @ Rs 700 per day till execution of work.

M&L for Desilting and cleaning of raw water channel from compound wall to raw water tank No.4 manually lifting mud/sludge from the bottom surface of the channel and cleaning the side walls(inside) with help of wire brush ,by applying bleaching powder and cleaning the entire surface repeatedly with fresh water and pumping out soiled water and clean bottom and side of wall chanel with fresh water , and including cutting grass, bushes both sides of the channel up to two metre each side from centre of the channel up to entire satisfaction of Engineer-in-Charge and depositing at a distance not more than 100 mtr away from site where as directed and leveling of surface both side of the channel complete all as specified and directed. Note . (a) The water shall not be provided by the department for cleaning of channel and contractor make own arrangement withot any extra claim. (b) The contractor will be deployed additional man power to clean the Channel as per requirement . If he failed to clean in within time frame , the payment will not be made to contractor and the recovery will be made RS @ 700 per day till completion. The contractor shall arrange of 01mtr x 01mtr x 01mtr iron frame (measuring unit ) and show the measurement at site to Rep of GE for removing of all mud/sludge and then take load in trolly / truck by manually , then take away from site. The quoted unit rate include cutting trees upto dia 65mm all as specified and directed by Engineer in Charge. (c) The quoted rate shall include cutting of wrapping grass, trees, bushes spread over the fencing of raw water tank and no extra claim admissible on this account.

M&L for Desilting of cleaning of raw water channel from Canal to air force boundary wall manually lifting mud/sludge from the bottom surface of the channel and cleaning the side walls(inside) with help of wire brush , by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and pumping out soiled water and clean bottom and side of wall chanel with fresh water , and including cutting grass, bushes both sides of the channel up to two metre each side from centre of the channel up to entire satisfaction of Engineer-in-Charge and depositing the same minimum distance 1500 mtr away from site where as directed including minor repair to channel and leveling of surface both side of the channel complete all as specified and directed. Note . (a) The water shall not be provided by the department for cleaning of channel and contractor make own arrangement withot any extra claim. (b) The contractor shall be deployed additional man power to clean the Channel as directed by Engineer in Charge. If he failed to clean in within time frame , the payment will not be made to contractor and the recovery will be made RS @ 700 per day till completion ” (c) The contractor shall arrange of 01mtr x 01mtr x 01mtr iron frame (measuring unit ) and show the measurement at site to Engineer in Charge for removing of all mud/sludge and then take load in trolly / truck by manually without disturbing farmer's crops/ asset , then take away from site. (d) The Quoted unit rate also included cutting grass 01 metre both side from centre of channel upto height of 4 metre and cutting of tress upto dia of 65mm.

M&L for Demolition of brick work built in cement mortar complete all as specified and directed by Engr-in-charge. Note: The contractor shall deployed additional man power to complete the cement work within 15 days from starting date of work. if he failed to complete the work in given time period, then recovery will be made of Rs 700 per day from the starting date to till completion of job.

M&L for Brick work with sub class 'B' old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:4 complete in surface channel etc all as specified and directe Engr-in-Charge. Note: The contractor shall deployed additional man power to complete the cement work within 15 days from starting date of work. if he failed to complete the work in given time period, then recovery will be made of Rs 700 per day from the starting date to till completion of job.

M&L for Cement concrete in surface channel and drains type B2 (1:2:4 40mm graded aggregate) including demolishing the broken cement concrete, complete all as specified and directed by Engineer-in-Charge. Note: The contractor shall deployed additional man power to complete the cement work within 15 days from starting date of work. if he failed to complete the work in given time period, then recovery will be made of Rs 700 per day from the starting date to till completion of job.

M&L for Rendering (External) 10mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Fair and Even, complete all as specified and as directed. Note: The contractor shall deployed additional man power to complete the cement work within 15 days from starting date of work. if he failed to complete the work in given time period, then recovery will be made of Rs 700 per day from the starting date to till completion of job.

M&L for Water level indicator made out of aluminium channel of size 75mm (for lugsi and aluminium plain sheet of 1.25mm thick) fixed on a aluminium channel by suitable size of nut, bolts and washers including necessary welding work etc including two coats of painting (white and water proof) and marking the water level in "feet" with red colour paint including necessary earth work and PCC foundation for fixing of aluminium channel including taking down old indicator complete all as specified and directed by Engr-in-Charge.

Taking out and cutting of grass, bushes, hedges upto 4 mtr length small trees upto dia 80mm with roots, bushes, hedges etc including leveling on all sides of raw water tank/underground sump/overhead reservoir including growth of other vegetation upto complete entire satisfaction of Engineer-in-Charge and removing the same outside MoD/ AF lan, complet all as directed. Note: (a) The cost shall be included Removing/ of grass , bushes with root below 30 cm under ground and making smooth surface all as directed by Engr-in-charge

Taking out and cutting of grass, bushes, hedges including small trees 2 mtr length with roots etc any location sump/ overhead reservoir including wiring/ scrupping the surface of walls and bottom of the tank by brush for the removal of salt deposit/ fungus grass/ water born green/ bushes and any other vegetation upto complete satisfaction of Engineer-in-Charge and removing the same outside MoD/ AF land, complete al as directed. Note: (a) The cost shall be included Removing/ of grass , bushes with root below 30 cm under ground and making smooth surface all as directed by Engr-in-charge.

M&L for Preparation of old painted surface of Flocculator and all Machineries installed at filtration plant ie. Motors, Panel, Grills, Railings etc. brooming down,scrubbing with steel wire brush, scrapping painted surfaces and applying two coat of synthetic enamel paint (grey) etc complete all as specified and as directed.

M&L for Preparation of old surfaces of floculator tank, sludge cell and filter bed by brooming down,scrubbing with steel wire brush, scrapping distempered and painted surfaces & applying two coats of white wash with DDL etc complete all as specified and as directed

M&L for Taking out the old/unserviceable filter media gravel of any size from beds and deposting the same not more than 150mtr away from filter bed etc The cost deemed to be ncluding cleaning and scrubing the all walls with wire brush and two coat of white cement & washing the same with potassium permagnate complete all as specified and directed by Engr-in-Charge. Note: The Filter media will be remove in the plant within 02 day from starting of datye of work in each presuure sand filter, if he failed to clean in 02 days time period, the recovery will be made RS @ 2000 Per day till completion of Job.

Supply and filling layer of fine brown/ white sand and coarse brown sand in filter media inside filter bed grade size 1mm to 1.5mm (as per sample) the depth of sand media varies between 60cm to 80cm very fine and 1 mm accumulated at top of the filter and coarse sand 1.5mm grade below the fine sand etc complete all as specified and directed by Engineer-in-Charge.as. Note: The Filter media fill in the sand filter plant within 01 day from the starting of dates of work in each presuure sand filter. if he failed to fill filter media in given time period, the recovery will be made RS @ 2000 Per day till completion of Job.

All as per item No. 2.30 here-in-before but intermediate 2nd layer of gravel graded size 12mm to 20mm.

All as per item No. 2.30 here-in-before but intermediate 3rd layer of gravel graded size 6mm to 12mm.

All as per item No. 2.30 here-in-before but intermediate 4th layer of gravel graded size 1mm to 6mm.

S&F in replacement Precast reinforced cemented concrete Slab/cover grade B1(1:2:4) of each size 140cm x 45cm x 8cm thick set in cement mortar 1:4 including form work,using reinforcement TMT bars 10mm dia. cut to length,bend to shape required as per IS code 456:2000 including two 12mm dia hook of MS bar Placed at suitable distance from both end all as specified and directed.

M&L for Taking down cement or cement lime plaster any description from brick wall/brick stone wall/concrete etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. Note: The contractor shall deployed additional man power to complete the cement work within 15 days from starting date of work. if he failed to complete the work in given time period, then recovery will be made of Rs 700 per day from the starting date to till completion of job.

STELLAR PROJECTS (BID ID -3087582)

GUPTA AND ENGINEERS (BID ID -3094344)

M/s Goyal Builders (BID ID -3087376)