Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹41.0 LAccepted-AOC GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | 1 | Accepted-AOC L-1 | |
| 2 | 2₹43.2 L+₹2.1 L (5.17%)Rejected-Finance 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | 2 | Rejected-Finance Being other than L-1 | |
| 3 | Rejected-Technical | - | Rejected-Technical Due to not enlisted in eligible Cat | |
| 4 | Rejected-Technical | - | Rejected-Technical Due to not enlisted in eligible Cat | |
| 5 | Rejected-Technical 145 SAINIK NAGAR RAIBARELLI ROAD TELIBAGH LUCKNOW | - | Rejected-Technical Due to not enlisted in eligible Cat |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
2 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST LUCKNOW
GE EAST LUCKNOW
PROVN OF WATCH TOWER WITH GUARD ROOM ALONG SOUTH-WEST BDY WALL AT 25 WEU AND ADDN/ALTN/IMPROVEMENT OF GALLERY CEILING THROUGH LED CEILING LIGHTS OF HQ CENTRAL COMD AND OTHER SANCTIONED WORK OF AGE B/R-I, AGE B/R-II AND AGE E/M UNDER GE (EAST) LUCKNOW
2023_MES_574011_2
GE/E/LKO/T-56 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE EAST LUCKNOW
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE EAST LUCKNOW
₹96,000
Yes
31 Mar 2023
11 Feb 2023
4 Mar 2023
11 Feb 2023
2 Mar 2023
17 Feb 2023
Amount
Surface excavation not exc 30 cm deep averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and directed
Excavation in trenches not exc 1.5 mtr wide & not exc 1.5mtr depth for foundation, manholes etc and getting out soft/loose soil complete all as specified and directed
M&L of PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, sub base or mass concrete etc complete all as specified and directed
M&L for plain cement concrete 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in foundations filling, sub base and mass concrete filling, etc complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc 6 mtr mean radius, old size brick built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with modular fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.
M&L for brick work with fly ash bricks,straight or curved on plan to any radius in a half brick thick wall in CM 1:4 complete all as specified and directed
Returning filling including spreading levelling watering and well ramming in layers not exc 25cm in hard dense soil complete all as specified and directed
Removing excavated material distance not exc 50 mtrs and depositing where directed at level not exc 1.5 mtrs above the starting point complete all as specified and directed
M&L treating the soil under plinth protection at the rate of 5 litre of emulsion per square metre of surface area complete all as specified and directed
M&L treating the back fill in contact with foundation at the rate of 7.50 litre of emulsion per square metre of vertical surface complete all as specified and directed. Note:- Area of sub structure in contact with back fill to be measured .
M&L treating the top surface of filled earth rate of 5 litre of emulsion per square metre of surface area complete all as specified and directed
M&L for RCC M-25 (20mm graded stone aggregate) design mix as in foundation, including raft footings, foundation beams, plinth beams bases for columns etc complete all as specified and as directed.
M&L for RCC M25 (20mm graded stone aggregate) design mix as beams etc. complete all as specified and directed
M&L for RCC M25 (20mm graded stone aggregate) design mix as roof slab complete all as specified and directed
M&L for RCC M25 (20mm graded stone aggregate) design mix as chajja complete all as specified and directed
M&L for RCC M25 (20mm graded stone aggregate) design mix as columns complete all as specified and directed
M&L for RCC M25 (20mm graded stone aggregate) design mix as beams, cantileavers, bressummers, lintel over 1.50 meter span complete all as specified and directed
M&L for RCC M25 (20mm graded stone aggregate) design mix as steps, staircase etc. complete all as specified and directed
M&L for RCC nominal mix 1:1.5:3, Type A1 (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC nominal mix 1:1.5:3, Type A1 (using 20mm graded stone aggregate) in columns, pillars piers post and struts complete all as specified and directed.
M&L for RCC nominal mix 1:1.5:3, Type A1 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers; lintels over 1.5m span complete all as specified and directed.
M&L for RCC nominal mix 1:1.5:3, Type A1 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
S&F steel windows or ventilators partly fixed and partly top hung with glazing bars complete all as specified and directed.
M&L for providing precast RCC using 20mm graded aggregate as in cover slab for man holes and similar articles with plain faces and set in CM 1:4 complete all as specified and directed.
M&L for mild steel TMT 6mm to 8mm dia cut to length, bent to shape required including cranking, bending and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for mild steel TMT 10mm dia and over cut to length, bent to shape required including cranking, bending and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for mild steel TMT 5mm dia and over cut to length, bent to shape required including cranking, bending and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for formwork to sides of concrete foundation, footings, bases of columns, rafts & rafts beams, sides & soffits (if any) of foundation & plinth beams & similar work in vertical surface complete all as specified and directed.
M&L for formwork to sides of columns with rough finished surfaces of concrete complete all as specified and directed.
M&L for formwork to sides and soffits of lintels & beams including supports overhangs etc with rough finished surfaces of concrete complete all as specified and directed
M&L for form work to soffits of roof slabs, floor slabs and similar work not exc 200 mm thick fair finished surfaces (flat), complete all as specified and directed.
M&L for formwork to chajjas, troughs and similar items including edges for rough finished surfaces of concrete complete all as specified and directed.
M&L for formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) complete all as specified and directed
M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs not exc 20 cm wide & sides of RCC/PCC bands in walls, horizontal or sloping, & similar work exc 10cm but exc 20cm wide, complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on fair surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed
M&L for rendering 15mm thick on other than fair faces of brick work or on concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed
M&L for 15mm thick rendering in CM 1:6 on other than fair surfaces of brick walls finished even and smooth w/o using extra cement complete all as specified and directed
M&L for 10 mm thick plaster in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed.
M&L for 10mm thick rendering on fair faces of brick work or on concrete surfaces in CM 1:6 finished fair and smooth without using extra cement complete all as specified and directed.
M&L for 5 mm thick rendering on fair faces of concrete surfaces as ceiling in CM 1:3 finished fair and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plaster surfaces of wall and applying two coats of oil bound distemper over one coat of wall care putty 1mm thick on walls with alkali resistant primer complete all as specified and directed
M&L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed
M&L for applying two coats of weather proof acrylic emulsion paint over a coat of 1mm thcik wall care putty & including a coat of emulsion wall primer all as per manufacture's instructions complete all as specified and directed
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets, roof padding, roof kerbs and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D-2 ( using 40mm graded stoe agg) as in sub base of floor or floors/ paving complete all as specified and directed
M&L of 100mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) for sub base complete all as specified and directed
M&L of 25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in sub/base of floor finished the surface even and rough complete all as specified and as directed.
M&L for non skid ceramic tiles coloured 7 to 8 mm thick [square/rectangular] area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including with motif/borders as in floors including over 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectanglar) area of each tiles exc .18 Sqm but not exc 0.38 Sqm in floor including screed bed 15mm thick or beding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed
M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.
M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size exc 0.11 sqm but not exc 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.
M&L for brushing neat cement slurry with 3.0 Kg./Sqm over roof slab complete all as specified and directed
M&L for coloured glazed ceramic tiles 600x300 x 7 mm or 450X350X7mm thick but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:4 complete all as specified and directed
M&L for 18 to 20 mm thick granite (of any type) slab of approved shade as in kitchen platform etc. bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e full granite polish as per local trade pratice) over & including 25mm thick screed bed (bedding layer) in CM 1:4 complete all as specified & directed.
M&L for hardcore of broken bricks of gauge not exc 63 mm deposited spread levelled in layer not exc 15cm thick watered and rammed to a true surface complete all as specified and directed
M&L for 50 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid in bays not exc 1.5m with expansion joints 30x10mm filled with mixture of hot bitumen and sand, finished the surface even and smooth without using extra cement complete all as specified and directed
M&L for 75mm thick PCC 1:3:6, type C-2 (40mm graded stone aggregate) as in plinth protection laid in alternate panels finished even and smooth without using extra cement complete all as specified and directed.
S&F pressed steel frames of size 125X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed
S&F pressed steel frames of size 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed
M&L cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as for filling in door frames etc complete all as specified and directed.
S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed
S&F 35mm thick 2nd class hard wood glazed skelton shutters open rebated and prepared to receive glass guage etc (w/o sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part-I section-8 clause 8.24 (a) complete all as specified and directed
S&F stainless steel butt hinges of size 100mm medium weight steel ISI marked complete all as specified and directed
S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed
S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 200mm aluminium anodized barrel tower bolts of extruded section complete all as specified and directed
S&F 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed
S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed
S&F mild steel framed work such as grills grating etc with ends of bars shouldered and /or riveted into spikes framed guard bars/railing complete all as specified and directed
S&F steel windows with side hung shutters including projecting type hinges steel handle and steel peg stay complete with glazing bar dovetailed or welded complete all as specified and directed
S&F steel windows with side hung shutters including projecting type hinges steel handle and steel peg stay complete without glazing bar dovetailed or welded complete all as specified and directed
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed
S&F glass corner shelf assembly, fancy type, made of 6 to 7mm thick toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed
S&F 3mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane, complete all as specified and directed.
S&F 3mm thick sheet glass pin headed and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed
M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed
M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed
S&F drapery rods, coloured, standard quality, PVC coated not less than 25mm dia with heads both ends and middle support rings etc complete all as specified and directed
S&F aluminium peg set consisting of 6 pegs on aluminium flat of standard section complete all as specified and directed
M&L for 25 mm thick (average thickness) PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in roof padding for filling uneven surface and finished fair/even complete all as specified and directed
M&L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under:- (a) M&L 10mm thick lastering in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement (b) Applying a coat of bitumen primer @ 0.50 ltrs/Sqm on prepared surface and allow to dry ( c) Applying one coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm (d) Supplying and laying 3mm thick (Minimum) polymeric water proofing membrane weight not less than 3 Kg/Sqm (e) Supplying and laying 3mm thick (Minimum) polymeric water proofing membrane weight not less than 3 Kg/Sqm (f) Binding with coarse sand dry @ 0.50 to 1.00 kg/Sqm dusted over bitumen (g) Supplying and laying fly ash brick tiles 40mm thick laid over on including 15mm thick screed bed in CM (1:4) and jointing and pointing in CM 1:4 by mixing linsead oil @ 5% weight of cement and bedding layer using 100% coarse sand.
M&L for roof/sunken treatment with polymeric water proofing mem breane with certain specification given below as under complete all as specified & directed (a) M&L plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (b) Applying a coat of bitumenous primer @ 0.50 LTRs /Sqm and allow to dry (c) Applying a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm. (d) Supply and laying APP based polymeric water proofing membrane, weight not less than 3.00 kg/sqm and and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) sealed the side laps with spread temper (e) applying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm
S&F 2nd class hard wood (Teak wood) wrought timber scantling / boarding for Rifle Rack including making notch for butt of rifle and bracket for barrel of rifle of size including fixing in wall and floor complete all as specified and directed
S&F mild steel bolts diameter of exc 10mm but not exc 15mm purpose made with hexagonal or square head one end and screwed the other or secured both end to be fitted with washers or one hexagonal or square nut exc 15cm but not exc 22.50 cm long complete all as specified and directed.
M&L for cement concrete type B-1, 1:2:4 as in cills, steps seismic and other similar bands plinth courses string courses lacing courses parapets copings surface channels and drains benching of man holes laid to shape and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L for 150mm dia SGSW pipes grade'A' laid in trenches and jointed in CM 1:1 complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete all as specified and directed.
M&L for 25 users septic tanks, excavation in ordinary soil, foundation in PCC 1:2:4 brick work in CM 1:4, RCC slab covers including RCC precast manhole covers having 6mm plate embeded all around / fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc complete all as specified & as shown in Drg No TD/217 sheet No 1/2 & 2/2.
M& L for soakage well excavation in ordinary soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-25 concrete including intercepting chamber, screen chamber, brick work in CM 1:4, RCC cover slab in M25, filling with brick bats, size of soak well 1.80 m dia x 4.5 m effective depth all as specified & as shown on Drg No . TD/576 sheet 1/2 & 2/2
M&L for hardcore of gauge not exc 63mm (using broken stone or boulder), depoisted, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality laid over and including 25mm thick sand cushioning vibrated with mechanical vibrator complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.
S&F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed.
S&F factory made solid panel PVC door shutter 28 to 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the styles & rails with suitable PVC sheet beading and joined together with solvent cement , supply and fixing in the frame complete all as specified and directed.
S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161 of SSR (Part -II ) 2010 complete all as specified and directed.
S&F steel window / ventilator glazed and gauged (combination) with side hung / top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars and necessary cooler arrangement in window complete all as specified and directed.
S&F plastic water closet seat cover white, closed pattern with flat bottom & cover and aluminum anodised hinging device all as specifed and as approved.
S&F vitreous china wash down water closet pan orrisa pattern, white excluding flushing cistern and flush pipe complete all as specified and directed
S&F PVC low level 10 lit capacity valve less syphonic action type flushing cistern with inlet ball valve and handle including brackets complete all as specified and directed
S&F PVC connections of 15mm size with PTMT nuts of 600mm long complete all as specified and directed.
S&F PVC connections of 15mm size with PTMT nuts of 450mm long complete all as specified and directed.
S&F vitreous china wash basin, white flat back size 580 x 450 mm including , Waste fittings, brass, chromium plated for glazed ware, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed to waste pipe including MS brackets complete all as specified and directed.
S&F vitreous China "Orissa pattern" size 580 x 440mm" coloured, with intergral foot rests with vitreous china 'P' or 'S' trap front or back inlet including connection to trap and to flushing pipe, anti syphnage pipe and making good the floor to match the existing complete all as specified and directed.
S&F wash hand basins vitreous china, coloured flat back size 550 x 400mm fixed including bracket complete all as specified and directed.
S&F Vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed
S&F Vitreous china bowl urinal flat back, size of 465 x 355 x265 mm white (minimum ) including providing and fixing plugs, screw, 32 mm dia flush pipe, waste fittings, grating, unions for discharge pipe etc (excluding flushing cistern) complete as specified and directed.
S&F for 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly-nuts, screwed for iron pipes & fixed complete all as specified and directed.
S&F for brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed
S&F 15mm bore brass CP mixer valve wash basin for mixing hot and cold water screwed down for iron pipe complete all as specified and directed
S&F for bib taps 15mm, chromium plated, fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe 15mm bore complete all as specified and directed.
S&F for stop/angle valves, 15mm chromium plated, fancy type, cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both ends for iron pipe 15mm dia, fixed complete all as specified and directed.
S&F for superior quality CP towel rail 20 mm dia, 'D' Type 600mm long between flanges complete all as specified and directed.
S&F brass chromium plated shower rose of 125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.
M&L for 75mm dia of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in wall or in floors complete all as specified and directed.
S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to trenches, complete all as specified and directed.
S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F for 110 mm bore PVC (SWR) bends any radius with oval access doors complete all as specified and directed.
S&F for 75 mm bore PVC (SWR) bends any radius with oval access doors complete all as specified and directed.
S&F for PVC (SWR) vent cowl suitable for 100mm bore of pipe complete all as specified and directed.
S&F for 75 mm dia PVC (SWR) junction (single ‘T’) equal or un-equal with access door complete all as specified and directed
S&F for 110 mm dia PVC (SWR) junction (single ‘T’) equal or un-equal with access door complete all as specified and directed
S&F for 110/75 mm bore PVC (SWR) reducers complete all as specified and directed.
S&F grating doom 100mm dia of stainless steel complete all as specified and directed.
S&F cast copper alloy health faucet chromium plated with 1.00 Mtr long flexible tube including wall hook complete all as specified and directed
S&F CP brass jet spray with hand hold arrangement including 1.5 m long flexible pipe with hook of superior quality complete all as specified and directed
M&L salt glazed stoneware gully traps of 100x100mm size, square or round mouthed, type‘P’ complete all as specified and directed
S&F for 500 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including one 20mm PTMT ball valve with polythene float and fly nut complete all as specified and directed.
S&F for 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed
S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed
S&F, 32 mm bore Low density PVC flexible pipe for wash hand basin/sink etc complete all as specified and directed.
S&F for 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed
S&F for 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed
S&F for 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed complete all as specified and directed.
S&F in repair viterous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white fixed in repair including connection to trap and cistern, flush pipe including plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.
Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
M&L RCC type B-1 (1:2:4) using 20 mm graded stone aggregate on beams, cantilevers, lintel over 1.5 m Span complete all as specified and directed.
M&L RCC type B-1 (1:2:4) using 20mm graded aggregate in slab supported on wall beams and columns in floors roof landings complete all as specified and directed.
M&L for cement concrete type C-2, 1:3:6( using 40 mm graded stone aggregate) as in embedding of fencing post etc complete all as specified and directed.
S&F for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for rolled mild steel work as in door frame (chowkhats ) including provn of 10mm dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 (Gde 165-E) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.
S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts including securing or type at crossings with and provision of galvanised mild steel wire staples or steel pins, etc complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.
Supply Chain link fencing of 75mm x 75mm mesh size (oblong) of 3-4mm dia GI wire wire complete all as specified and directed.
M&L for earth filling under floor spreading and levelling in layers not exc 25 cm thick for well ramming watering required complete all as specified and directed .
Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures (DBs,submain,cables etc) complete all as specified and directed.
Taking down carefully by unscrewing from wall/ceiling, fittings and fixtures such as ceiling roses, lamp holders, brackets, ceiling fittings, tube light fittings etc. for reuse at site or carrying to the store complete all as specified and directed. (Note:- Fitting/Fixture to be measured only when found serviceable in all respects complete for reuse)
M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly, drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet for provision of switches/regulators as per specified SSR complete all as specified and directed. (NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls)
All as per item No 152 above but 5 Amp socket outlet, independent.
All as per item No 152 above but on the same board.
All as per item No 152 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly.
S&F switch piano flush type 5 Amp one way single pole, 240 volts complete all as specified and directed.
S&F socket outlet 5 Amp 5 Pin 240 volt flush type complete all as specified and directed.
S&F switch socket outlet two in one 5 & 15 Amp 6 pin multipurpose combination complete all as specified and directed.
S&F ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC/Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.
S&F ceiling fan regulator for 1200mm/1400mm sweep electronic rotary step type 120/280 volts complete all as specified and directed.
S&F lamp holder with back plate suitable for batten fittings (white colour) complete all as specified and directed.
S&F 2X2 36 Wattl LED ceiling Light Fitting (with one extra driver each light) exquisitely designed luminaire Smart glow which is bound to deliver extra lumen thruogh its pure form and glare-less light Recessed full open (120 lumen /watt) Make- Philips Cat No-RC383B LED 36S-4000 PSU OD WH PIR or equivalent Havells/bajaj as approved by GE.
S&F in replacement MCB, single pole, 240 Volts, of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified & directed.
S&F MCB single pole, 240 Volts, of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified & directed.
S&F wall fan of 400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 cum/min with all accessories complete all as specified & directed.
S&F exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 300 mm sweep 900 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076 mm complete all as specified & directed.
S&F exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 250 mm sweep 900 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076 mm complete all as specified & directed.
Cutting walls any type, making holes for fixing of exhaust fan any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed.
S&F of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed.
S&F LED Mirror light fitting 15 watt(2') with extruded aluminium housing and robust construction complete with inbuilt driver complete all as specified & directed.
S&F LED street light pressure die cast aluminium housing suitable for 35W IP 66 protection including MS clamps made of 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe complete all as specified & directed.
S&F LED building security light 36W IP 65 including one number MS clamps made of 25X3 mm flat iron with bracket of GI pipe light grade 25mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting, connecting with three core copper flexible wire 23/0.0076 complete all as specified and directed.
S&F MCB DB TPN (double door) 4 Ways, 415 Volts including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified & directed.
S&F MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified & directed.
S&F MCB SPN, 40 to 63 Amps, 240 Volts , breaking capacity 10KA complete all as specified & directed.
S&F TPN three pole 415 volts100 Amps rupturing capacity 25KA complete all as specified & directed.
M&L for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
S&F ceiling fan of 1200/1400 mm sweep,230V , 50 HZ ,330 RPM,with BEE 5 star rated with all aceesories complete all as specified & directed.
M&L for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
Supplying and laying or fixing, jointing and testing LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip armoured, ISI-7098 Marked, with aluminium conductor multi stranded, heavy duty 1100 Volts grade of size 10 sqmm cross sectional area, 2 core, laid in trenches/ laid under floor or fixed naked with walls/ on poles/ in ducts /in GI pipes etc. with and including MS clamps, nuts , bolts, washers complete all as specified and directed. (Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.)
Supplying and laying or fixing, jointing and testing LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip armoured, ISI-7098 Marked, with aluminium conductor multi stranded, heavy duty 1100 Volts grade of size 25 sqmm cross sectional area, 4 core, laid in trenches/ laid under floor or fixed naked with walls/ on poles/ in ducts /in GI pipes etc. with and including MS clamps, nuts , bolts, washers complete all as specified and directed.
Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete all as specified & directed.
M&L for laying well burnt old size bricks, sub class "B" bricks, straight or curved on plan , laid flat with width equal to length of brick, laid dry over electric cable for protection complete all as specified & directed.
M&L for renewal of earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth) pit not less than 2.25mtr below normal ground (level) connected to and including using galvanised iron strip 25×4mm as earthing lead by means of bolts nuts check nuts and washers of galvanaized iron or steel including PCC pit in 1:2:4 type B-1 RCC cover with suitable handle and angle iron 40x40x5mm frame, excavation and earth work in any type of soil, medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade protetion pipe 15mm bore upto main board complete as shown on electrical plate No 5 of MES Sch 2009 ( part-I) and testing and complete all as specified and directed.
S&F integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover etc complete all as specified and directed.
S&F single side connection LED T8 tube light rod 8 Watt, 6500K of two feet long into and including LED tube light fixture of two feet long with T8 push fit type holders, connector block, end caps etc including connecting up complete all as specified and directed. Make : Crompton, Cat No : DMLN1LT8-8& LT8-8-865-2 or equivalent in havells / Philips as approved by GE
S&F of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into existing T8 conventional fluorescent tube light fitting after changing the necessary electric connections as required at site complete all as specified and directed. Make : Crompton, Cat No : LT8-20-865-2 , Havells, Cat No : PHOTONULTRA1213T8SSTL20WLED865SPC, PHILIPS Cat no MAS LED tube 1200 mm 18 w 865 T8 I - 2100 Lumen as approved by GE.
S&F LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.
S&F sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
S&F MCB SPN, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
Supply and laying 40 mm bore galvanised steel tubes with all fittings, light grade laid in trenches for cable protection complete all as specified and directed.
M/S Reliance Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .