carrying out drainage works, chamber repairs, road repair works, installation of old paving blocks, and other necessary works as required within the municipal council area.

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering preparing the bed for the foundation and necessary back filling, ramming, watering, including shoring and strutting etc. complete. (Lift up to 1.5 m) by mechanical means

Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete.

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete.

Filling in plinth and floors with contractors material/brought from out side and approved by Engineer incharge in layers of 15cm to 20cm including watering and compaction etc. complete.

Providing second class burnt brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete

Providing and laying Rough Shahabad Stone Flooring 40mm.to 45 mm. thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. etc. Complete

Providing and laying in situ / ready mix controlled grade of M15 of trap /granite /quartzite /gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) VSI sand crushed, excluding reinforcement)

Providing second class burnt brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm x 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding racking out joints and watering etc. complete.

Providing and fixing Country cut teak wood windows with double leaf 25mm thick planked shutters without ventilators as per detailed drawings including stainless steel fixtures and fastenings and finishing the wood work with oil painting 3 coats etc.complete

Providing and fixing Country cut teak wood window with double leaf half glazed and half panelled shutter with style 70x20mm thick rails 95x20mm thick and pannels 15mm thick with ventilator including wrought iron hold fast, stainless steel fixtures and fastenings and finishing the wood work with oil painting 3 coats etc. complete.

Providing and fixing Country cut teak wood windows/ventilators with double leaf panelled shutters 25mm thick with out ventilators as per detailed drawingin cluding stainless steel fixtures and fastenings and finishing the wood work with oil painting 3 coats etc. complete.

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc.complete.

Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.

Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.).

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the coat rough to receive the sand faced treatment 6 mm to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete.

Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/diamond pattern on a bed of 1:6 C.M.including cement float,striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete.

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in threecoats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.

Providing and fixing in position TMT – FE-500 bar reinforcement of various diametersforR.C.C. pilecaps, footing, foundation, slabs, beamscolumns,canopies,staircase,newels,chajjas,lintels pardis, coping,fines, arches etc. as per detailed design, drawing and schedules,including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing / trap / granite / quartzite gneiss rubber stone soiling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing, laying and fixing P.V.C. pipe of 15mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc.complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc.

Providing and fixing 90cmx60cm Granite plate engraving 10cm. Height letter,figures including painting the lefters/figures with approved colour and shade complete.

Providing internal cement plaster 20mm. thick in Single coats in cement mortar 1:3 with out neeru finish,to concrete,bricksurface,inallpositionsincludingscaffoldingandcuring etc. complete.

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete

roviding and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 900mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete

Providing and fixing Orissa type white glazed earthen ware water closet pan of size 260mmx440mmx580mm with approved make Slim wall hung cistern with installation kit including Sor Ptrap with cast iron soil and vent pipe up to out side face of the wall 1:2:4 brick bat lime concrete bedding with out flushing tank and its accessories etc.complete.

R.C.C.Chamber cover with frame 90cm*45cm Heavy Duty 225kg

R.C.C.Chamber cover with frame 60cm*45cm Heavy Duty 160kg

Providingand constructing Brick Masonry Inspection Chamber 60cmx45cmx90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channel shalf round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.

Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S.Angles (50mmx50mmx6mm) at 2.5Metres, Center to center including excavating pits for foundqtion, fixing post in cement cocnrete1:4:8 of size 45x45x45cm fastening the wire and painting theM.S.Angles with one coat of red lead primer and two coats of painting etc.complete.

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60mm thickness of having a strength of 300 Kilogram/Sq.cm.of approved quality and shape on a bed of crushed sand of 25to30mm thick including skirting joints and cleaning etc. complete

Providing and laying Rough Shahabad Stone Flooring 40mm.to 45 mm. thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. etc. Complete

Providing,laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers,clamps,etc.including necessary excavation, trench filling etc.complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing,laying and fixing P.V.C.pipe of 110mm. dia.with fittings such as bends,tees,reducers,clamps,etc.including necessary excavation,trench fillingetc.complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing,laying and fixing P.V.C. pipe of 160mm dia. with fittings such as bends,tees,reducers,clamps,etc.including necessary excavation, trench filling etc.complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applyying and brooming requisiter type of screenng / binding Materials to fill up the interstices of coarse aggreage, watering and compacting with Vibratory roller to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) mm Aggregate)

Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63x45 cm size including cold water piller taps, brackets, rubber plug sand brass chain, stop tap, chromium plate bottle trap an dnecessarypipe connection sincluding UPAC waste pipe an dtra pup to the out side face of the wall, making good the damaged surface, testing etc. complete.

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nutsetc, complete. With colour Anodising with box.

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box

Providing Of 6 mm Aggrigate Below Paving Block As Per Direction Of Engineer Incharge

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25to30mm thick including skirting joints and cleaning etc. complete

Providing and laying in situ cement concrete M-20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen etc. complete.

Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt.

Providing and erecting 1.2 meter high wire fencing with five rows of barbed wire supported on mild steel angle ( 50 x 50x 6mm) post at 2.5 m c/c including excavation of pits of foundation concrete fixing the posts in ( 1:4:8) cement concrete block of 45x45x45 cm and fastening the Wires and painting the angles with one coat with red lead primer and two coats of oil painting etc.complete

Providing and laying in situ / ready mix cement concrete M-20 trap / granite / quartzite gneiss metal for R.C.C. work in foundations like raft, strip foundation, grillage and footing of R.C.C. columns and steel stanchions etc. including bailing out water, steel centring formwork, laying / pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (excluding reinforcement and structural steel) etc. complete, with fully automatic microprocessor based PLC with SCADA enabled reversible drum type mixer / concrete batch mix plant (pan mixer) etc. complete. With fine aggregate (natural sand / crushed sand VSI grade finely washed etc.)

Toughned Glass 8mm

Providing and laying cast in situ / ready mix cement concrete M-20 trap / granite / quartzite gneiss metal for R.C.C. beams and lintels as per detailed designs and drawing or as directed including steel centring formwork, cover blocks, laying / pumping compaction roughening the surface if special finish is to be provided and curing etc. complete (excluding reinforcement and structural steel) etc. With fully automatic microprocessor based PLC with SCADA enabled reversible drum type mixer / concrete batch mix plant (pan mixer) etc. complete. With fine aggregate (natural sand / crushed sand VSI grade finely washed etc.)

Providing and laying cast in situ / ready mix cement concrete M-20 trap / granite / quartzite gneiss metal for R.C.C. slabs and landings as per detailed designs and drawing or as directed including steel centring formwork, cover blocks, laying / pumping compaction finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete (excluding reinforcement and structural steel) etc. With fully automatic microprocessor based PLC with SCADA enabled reversible drum type mixer / concrete batch mix plant (pan mixer) etc. complete. With fine aggregate (natural sand / crushed sand VSI grade finely washed etc.)

Providing and laying cast in situ / ready mix cement concrete M-20 trap / granite / quartzite gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawing or chamfered as approved by the engineer including steel centring formwork, cover blocks, laying / pumping compacting curing, finishing and roughening them if special finish is to be provided and curing etc. complete (excluding reinforcement and structural steel) etc. With fully automatic microprocessor based PLC with SCADA enabled reversible drum type mixer / concrete batch mix plant (pan mixer) etc. complete. With fine aggregate (natural sand / crushed sand VSI grade finely washed etc.)

Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete.

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite /Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edgesetc. complete . Both side polish

Providing and fixing white european type wall-hung, of size 360mm x 360mm x 575mm with flush valve of approved make including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge.

Providing and fixing heavy duty inter locking concrete rubber mould glossy old paving blocks of 80 mm thickness of having a strength of 400 kg/sq. cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including joints and cleaning labour rate complete (using 100% crushed sand) ( Rate of Labour For laying Old Paving Block )

Providing and fixing heavy duty inter locking concrete rubber mould glossy old paving blocks of 80 mm thickness of having a strength of 400 kg/sq. cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including joints and cleaning labour rate complete (using 100% crushed sand)

Scrapping the plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed.

Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plasteredsurfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat)etc. complete.

Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete.

Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete.

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete

Ply wood 12mm thick

Veneer 3.5 to 4 mm thick

Providing, Laying, Fixing Rubber Speed breaker Size- W 350 X L 500 X H 50 mm (Including Labour Rate)

Please Enable Macros to View BoQ information