REPAIR AND MAINTINANCE OF DAMAGE POLE IN SUDDEN INCIDENT OR EMERGENCY CONDITION UNDER EDD JAHANGIRABAD.

Amount

fo|qr forj.k [k.M&tgkWxhjkckn ds vUrxZr {kfrxzLr ih0lh0lh@,l0Vh0ih0 iksyksa dks cnyuk ,oa Vs<+s&es<+s iksyksa dks lh/kk djus lEcU/kh dk;ZA

Carriage of fallowings from ESC. BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, rcquricd for proper completion of work, distance about to 80 Kms.

PCC/STP from E.S.C Bulandshahr to Site.

Carriage of All line Material from store to j.e store Sub station as ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc.

Erection of Single support including complete 1 IT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Single support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Carriage of All line Material from store to j.e store Sub station as ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc

Laying, sagging. Stringing and binding and jumpering of ACSR Weasel conductor on the newly erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

fixing of Stay rod with Stay wire in proper way with Nozelling.

Grouting of Stay rods .

Guarding of 11 K V line at road crossing by laying 3 Nos. Gl wire of size 6/10 SWG parallel and fixing of lacings (Tilli) at a distance at 1.5 mlrs as per direction of supervising engineer/RESPO mannual it. Includes the cost of labour,T&P carrier etc. required lor proper completing of work.

Resagging of loose and bad sag of L.T./H.T. line.

Chopping of Tree branches..

Tightening of Stay

Grouting of PCC/STP Pole Old

Change of broken/Damaged/Missing following Items :-

Disc Insulator

Nut & Bolt off size

Bended X-Arm/Angle/Channel

Ailment of PCC/STP Pole

Stay Clamps

D.P. Clamp

Stay Insulator

Making of Plinth of the Damaged/Broken STP of the welded 03 Nos. Angle Iron piece with the Pole.

The following material is required to be The following material is required to be supplied by the contractor.

Stay clamp.

Stay insulator.

L.T. clamp.

L.T. shackle insulator.

L.T. insulator bolt 6 ench.

F clamp.

Double pole clamp.

Holding clamp.

Bolt & nut off size.

Extra Milage charges and carriage from PCC/ST Pole & other material from each 10 Km.

Above supply shall be done as per UPPCL/RESPO rules.

A K ELECTRICAL ENG WORKS