PROVN OF HARD STANDING WITH VEHICLES PARKING SHED IN KV NO 1 NEAR AT AF STN SURATGARH

Amount

Excavation in post holes (or similar holes) each in n.exc. 0.50 cum getting out returning filling in an ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm watering an removing surplus soil out KV land and making good surfaces complete all as specified and directed.

Material and labour for PCC(1:2:4) type B2 (40 mm graded stone aggregate) filling in post holes, surface channels, drains and other similar work complete all as specified and directed.

Supply and fixing rolled Mild steel Plates (plain or chequrered) chanels, square cut or notched, forming holes, with rivted, bolted or welded attachment confirming to Fe410-W complete all as specified and directed.

Supply and fixing mild steel for framed structure like trussed, purlins, crane gantries post rails and fastening and heavy bracket framming (Beam, Tee, Angle, Channels, Tubes or Flate sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A complete all as specified and directed.

Supply and fixing mild steel flat iron as wind tie for roof including necessary drilling for securing bolts etc. complete all as specified and directed.

Supply and fixing mild steel screw as bolt (Machine made) with hexagonal or square heads one end screwed, each screwed end have one washer and one nut, dia of shunk 11-15 mm and length of bolt exec 5 cm and n.exc 10 cm complete all as specified and directed.

Material and labour preparation of new or previsouly untreated steel surfaces of any descriptio, over 10 cm in width or girth not otherwise described by applying two coats synthetic enamel paint over a coat or red oxide zinc chrome primer complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for surface dressing n.exc 15 cm deep in soft/loose soil including removing bushes/small trees etc. complete all as specified and directed.

Material and labour for 75 mm thick PCC1:4:8, type D-2 using 40mm graded stone aggregate as in sub base of floor/tiles etc. complete all as specified and directed.

Material and labour for 75mm thick cement concrete 1:2:4, type B1, using 20mm graded curshed stone aggregate as in floor finished, surface finished even and smooth without using extra cement including making joint in blocks not more than 10 Sqm and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand) complete all as specified and directed.

Material and labour for PCC(1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in benching, padding, roof kerbs or mud stops coping etc rounded or chamfered on edges complete all as specified and directed.

M/S VISHNU ENTERPRISES

M. S. CONTRACTOR

GURUJI ENTERPRISES

JK ENGINEERS