ADDN/ ALTN TO X-RAY ROOM AT SMC, PROVN OF STROM WATER DRAIN NEAR DHOBI GHAT AND DEDICATED LT FEEDER FROM ATC TO MAFI AT AF STN BKT

Amount

Surface excavation not.exc. 30 cm deep and averaging 15 deep and getting out in soft/loose soil.

Excavating in trenches, not exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and directed..

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for form work to sides of concrete foundations,footings,bases of columns,sides and soffits of foudation and plinth beams and similar work ;vetical or to batters in rough finished surfaces of concrete complete all as specified and directed.

M&L for form work to sides of columns, pillars, posts, struts and piers in rough finished surfaces of concrete complete all as specified and directed.

M & L for reinforced cement concrete M-25(Design mix) using 20mm graded stone aggregate as in foundations ,footings,foundation beam,plinth beams,roof beam bases of columns and mass concrete etc finished complete all as specified and directed.

M & L for reinforced cement concrete M-25(Design mix) using 20mm graded stone aggregate as in columns,pillars,piers,posts etc complete all as specified and directed.

M&L for TMT bars 10 mm dia and over for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed.

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups and spacer, binder etc cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs,projections ,landings and similar work including attached pillasters,buttresses etc in rough finished surfaces of concrete complete all as specified and directed.

M&L for form work to chajjas ,troughs and similar items including edges rough finished surfaces of concrete complete all as specified and directed.

M & L for Brick work with flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M & L for treating the bottom and side of excavation at the rate of 5 ltrs of emultion per Sqm of surface area complete all as specified and directed.

M & L for treating the back fill in contact with foundation at the rate of 7.50 ltrs of emultion per Sqm of surface area complete all as specified and directed.

M & L spreading and levelling in layer not. exc. 25 cm thick incl. well ramming watering as required.

Returning filling in excavated earth obtained from above items spreading levelling, watering & well ramming in layers not. exc 25cm complete all as specified and directed..

Removing excavated materials ( soil) to a distance n. exc. 50m and depositing where directed complete all as specified and directed..

M&L for hard core broken bricks of gauge not. exc. 63mm, deposited, spread and levelled in layers not. exc. 15cm thick, water and rammed to a true surface complete all as specified and directed.

M&L PCC (1:4:8) typeD-2 using 40 mm graded stone aggregate as cement concrete 100 mm thick as in flooring, surface finished etc. complete all as specified and directed.

M&L PCC (1:2:4) type B-1 using 12.5mm graded aggregate damp proof course 40mm thick to horizontal surfaces including necessary fornwork complete all as specified and directed..

M&L for polythene film, 150 micron thick laid on a coat of bitumen primer at the rate of 03 kg/Sqm to 0.50 kg/sqm. complete all as specified and directed.

M&L for APP Polymeric based water proofing membrance (polyster) minimum 3 mm thick and weighing not less than @ 3.6 kg/ Sqm of Make Moply FP manufactured by STP Texas Ltd or Hyper Plus (Polyster) manufacturered by M/S IWL or make polyplast manufactured by MK Petro as approved by GE black finish consists of a centre core of high molecular high density polythylene film (HMHDPS) and reinforced with non woven polyster mat of minimum 160 gms/Sqm with a thermo fusable finish laid over compatible bitumen primer at the rate of 0.40 ltr/sqm forcing overlap with a propance or a button gas torch with a over lap of 75 mm at sides and 100 mm a the ends and sealing incl applying at coat of cold emulsion bitumininous primer incl 20mm thick cement plaster (1:4) on roof using water proofing admixture all as per manufacturers instructions incl preparation of surface complete all as specified and as direted. Note : The water proofing treatment shall be got carried out by the manufacturer or their authorised aplicator only.

M & L for RCC M-25(Design mix) using 20mm graded stone aggregate as in slabs supported on walls,beams and columns,roof projections ,canopies and shelves etc finished finished complete all as specified and directed.

M&L for rendering 15 mm thick in cm 1:6 on faces of brick without using extra cement or concrete surfaces and finishing even and smooth complete all as specified and directed.

M&L for rendering 15 mm thick in cm 1:4 on faces of brick or concrete surfaces and finishing fair and even complete all as specified and directed

Supply only Liquid water proofing compound as approved by GE in writing.

M&L for applying two coats of oil bound distemper over and including 1mm thick birla wall care putty over a coat of primer on walls including preparation of new plastered surface complete all as specified and directed.

M&L for two coats of cement base paint any colour on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for non skid/anti skid vetrified (coloured) jointless tiles (square or rectangular) area of each tile exceeding 0.42 sqm but not.exc 1.00 sqm and 9-10 mm thick, as in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed in CM 1:6 over and 25 mm thick sub base of floor in PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) complete all as specified and directed. (Make:- M/s Somany/Orient Bell/Johnson/ Kajaria or equivalent).

S&F non skid ceramic coloured tiles 7 to 8mm thick (squre/rectangular) area of each tile exc 0.18sqm but n.exc 0.38 sqm, as in skirting etc.set and jointed in neat cement slurry over and including 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. (Make:- M/s Somany/Orient Bell/Johnson or equivalent).

M&L for 40 mm thick flush shutters, solid core construction, with block board 3 core and plywood face panels, commercial type and laminate mate finish on both sides complete.all as specified and directed. (Make:- Centuri/ Kitply/ Greenlam or equivalent as approved by GE in written.

S&F for stainless steel ISI marke barrel tower bolts of extruded section 200mm long complete all as specifed and directed.

M&L for 300 mm stainless steel ISI marke sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed complete all as specified and directed.

S&F stainless steel ISI marked handeles of 150mm complete all as spcecified and directed.

S & F for 100 mm size butt hinges, medium weight cold rolled mild steel, and fixed complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar of any specification and in any position complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

S&F glossy finished chequered cement concrete tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slury in floors with grey cement and pigment including screed bed 15mm thick in cement mortar (1:6) complete all as specified and directed.

Taking up or down steel tubing and connections, 15mm bore and removing from site complete all as specified and directed.

S&F 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection finished even & smooth without using of extra cement complete all as specified and directed.

S/F 5.5mm thick frosted sheet glass as ordinary quality and glazing with oil putty in square exc 0.5 sqm in each point.(plain or colour complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.56mm nominal dia or wire and average width if aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and as directed.

M&L Cement concrete (1:3:6) type C1 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and as directed.

M&L PCC type B-1, (1:2:4) (20mm graded stone aggregate) as in coping, side kerbs, mud stops etc complete all as specified and directed.

M&L for extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as specified and as directed.

M&L for 600 mm dia, reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed.

M&L Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in type C2 (1:3:6) using 40 mm graded stone aggregate for 600 mm bore pipes complete all as specified and as directed.

M&L Precast reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate nominal mix as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs and similar articles with plain faces as specified in clause No 4.11.16 of SSR Part-I (2009), set in cement mortar (1:4) complete all as specified and as directed.

Supply and Laying in trenches / fixed to wall/ drawn in pipe/duct/laid in floor XLPE insulated screened,PVC bedded and sheathed and steel wire/strip armoured cable 1100V grade with stranded aluminum conductor of cross sectional area 120 Sq mm 3.5 core complete include with approx per 50 mtr Cable route markers made of cast iron 10 mm thick 6" dia with "LT Cable" mark and indication of direction and in casting welded to angle iron 40x40x6mm, 450mm long including embedded in PCC block (1:2:4) B1 (20mm aggregate) of size 150x150x300mm deep complete all as specified and directed.

Supply and laying sand cushioning for cable protection in trenches 8cm before laying cable and 15 cm deep over the cable all as specified and directed

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and as directed.

M&L for drilling suitable dia horizontal bore holes for insertion/ laying of upto 100mm bore GI tubing of any description below/under existing road surfaces / apron /floors etc with using mechanical and / or manual any length devices as required at site including making good the disturbed surfaces to match with the existing streta after laying pipes complete all as specified and directed.

S&F light grade galvanized iron pipe 80 mm bore confirming to IS : 1239 and ISI marked with all fittings fixed on walls/poles/crossing of road etc for protection of cable complete all as specified and directed. Make : Tata / Jindal/ Zenith

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 3.25 meter below ground level) connected to GI wire 4 mm dia main earthing lead by means of galvanized bolts, uts and washers with connected to earth test point & to main switch board /panel etc. all as specified and testing on completion with and including necessary excavation and earth work in any type of soil, earth electrode, earthing lead from electrode to equipment/substation/panel etc, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6 mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate 40mm thick cover reinforced with 8 mm dia TMT bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20 mm dia with funnel,wire mesh all as shown in electrical plate no. 3 of SSR Part I of 2009 and 15 mm dia GI light grade pipe earth lead protection complete all as specified and directed.

Supply and fixing of OFF LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 200 Amps complete all as specified and directed.

S&F in repair of MCCBs thermal magnetic including necessery fixing arrangement of capacity 315 Amps, 4 Pole, breaking capacity 36KA complete all as specified and directed.

S&F in repair of MCCBs thermal magnetic including necessery fixing arrangement of capacity 250 Amps, 4 Pole, breaking capacity 25 KA complete all as specified and directed.

Taking out unsv old LT cable of any type and of size from existing trenches/ floor/road/wall and deposited to E/M Yards.

M&L GI Tubing light grade with all fittings and fixed to wall , poles and ceiling or laid in floors of size 40 mm dia complete all as specified and directed. Make- TATA/ JINDAL/ ZENITH

Dismantling, disconnecting and taking out functional split AC and reassebling fixing and testing incl installation of AC in new position/location after making necessary cutting /opening in wall incl weliding ,charging of gas in top up, copper pipes,insulation etc complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed.. Make- Plaza/Finolex/Polycab/Havells

Supply and fix flush mounted factory made VTPN DBs, 415 volt IP - 43 protection IK-09 with metal double door with 200 Amp copper bus bar with 2 neutral bar, earth bar and cables management fully insulated bus bar with set of wire and door earthing with provision of space of 100 amps MCB as incomer and SP/TP MCBs as outgoing 4 way complete all as specified and as directed .Make- Indoasian/L&T/Legrand

S&F MCB SPN 32 to 40 Amps 240 volt,50 hz,10 KA breaking capacity :C" curved type complete all as specified and directed. . Make- Indoasian/L&T/Legrand

S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as specified and directed. Make- Indoasian/L&T/Legrand/ ABB

S&F MCCB 4 pole 125 Amp 415 volts 50 HZ 25 KA breaking capacity complete all as specified and directed. Make- Indoasian/L&T/Legrand/ ABB

S&F Submain wiring with two single core PVC insulated FRLS-H multistrand copper conductor cable of size 10Sq mm drawn into and including non metallic heavy duty rigid concealed PVC condute not less than 25 mm size ISI marked ivory colour (Pressfit or similar brand ) with all fittings / accessories and 10Sq mm FRLS-H multistrand copper conductor cable as continuous earth wire complete all as specified and directed. Make-Polycab/Finolex/RR kables/plaza or equivalent (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate quoted for this items.)

S&F Submain wiring with two single core PVC insulated FRLS-H multistrand copper conductor cable of size 04 Sq mm drawn into and including non metallic medium duty rigid concealed PVC condute not less than 25 mm size ISI marked with all fittings / accessories and 04 Sq mm FRLS-H multistrand copper conductor cable as continuous earth wire complete all as specified and directed.. Make-Polycab/Finolex/RR kables/plaza or equivalent (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate quoted for this items.)

M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt grade in non metallic rigid PVC concelled conduit medium grade 20/25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of module metal flush boxes and including modular front cover plate & back plate for mounting modular type switches /socket/fan/ regulator etc including provision of one single core PVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dolly switch board complete for following- Make of cable- Polycab/Finolex/RR kables/plaza Make of conduit- AKG/Jindal/Tata/Havells One light/fan point controlled by one switch SP 5 Amps ,240 V

One 3 pin 5 amps switch socket outlet point on independent board

One 3 pin 5 amps socket point on same board

Ditto all as per the item No 72 herein before but with 2.5 sqmm conductor for 5 pin 15 Amps switch socket outlet.

S&F switch modular type 1 module single pole, one way 5 Amps .Make-Goldmedal/L&T crabtree(Havells)

S&F switch modular type 1 module single pole, one way 15 Amps. Make-Goldmedal/L&T /crabtree(Havells)

S&F socket outlet , 5 pin, 15 Amps modular type 2 module Make-Goldmedal/L&T /crabtree(Havells)

S&F socket outlet 5 Amps modular type 2 module Make-Goldmedal/L&T/ crabtree(Havells)

S&F socket outlet 5 pin 20 amp modular type 2 module with suitable size of module metal flux boxes and including modular front cover plate and back plate for mounting modular type switch & socket with one single pole one module MCB of 20 amp including electrical connection complete all as specified and directed Make-Goldmedal/L&T/ crabtree(Havells)

Supply & fixing round shape 12 Watt 220 Volt AC surface/recessed mounted type with high efficiency PMMA diffuser soft glare free light complete with drivers,holders ,LED lamp suitable for roof ceiling including connection up with three core flexible copper conductor cable of suitable size complete. Make- Phillips/Jaguar

Supply and fix LED light fittings 20 watt ,220 voltAC decorative box type with driver holder including 18 watt LED tube light connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rose complete .Make :- Havells cat part no-LUMENSMART20WLED865PCWH/Philips/Bajaj cat part-BCLSB 18NW

Supply and fixing in repair new generation energy saving & enivornmental freindly long life LED security light made up to pressure dia cast housing with toughned glass and individual high power LEDs with secondary optics ,IP 66 protection and impact resistance of IK 07 and electronic driver of 35 watt or higher side 5700 K complete with security light bracket (complete with two set of clamp ,nut and bolt) made out of 40 mm medium grade GI pipe bend to shape and with fixing arrangements duly welded (length of pipe should not be less than 1.2 mtrs) and making conection with using 2.5 sqmm PVC insulated multistranded copper conductor two single core cable complete all as specified and directed. Make- Phillips/Bajaj cat part-edge plus 169910/Havells cat part-endura plus

Earthing complete with galvanised steel earth plate electrode 60cm x 60cmx6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 M beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work, complete.

Industrial Traders (BID ID -3186316)