Renovation of Crew rest room in Palani-2 branch.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (UPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all cirner hoints mitred and fusion welded. Windows should be steel reinforced with 25x24x25mm steel reinforcemnet with a thickness of 1mm to have dimensional stability. The sash should be of 60x74mm. The profiles should have co-extruded seals. Hardware: all the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass/6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly tot he plastered brick wall using self expanding nylon plug and driving MS electroplated screws into plug.

FLOORING with scratch proof CERAMIC TILES (colour with design) of approved quality and colour of size 305x305x6mm in all floor over 20mm thick cement mortar 1:3 (one cement, three sand) base above the existing bed concrete and pointing with same colour cement added with coloring pigment etc., complete, complying with standard Specification. As directed by the departmental officers.

REDADOOING THE WALLS With white colour GUAZED TILES of size 300*200*6mm of best approved quality ion cement motor 1:2 (one cement and two stand )and pointing with the same colour cement neatly to full death of tiles in all floors as directed by the dapartmental officers and complying with standard specifacition. the colour of the tiles should be the tiles should be got approvrd by the departmental officers before execution

Painting the ceiling /wall surface with one coat of cement painting with white cement over plain surface including labour cost of paint, brush etc..Complete as standard specification.

Supplying and PAINTING OLD plastered wall surfaces in all floors with two coats approved quality and colour of Emultion paint over priming one coat with white cement. The rate is inclusive of cost of all materials and labour, brushes etc complying with standard specification. As directed by the departmental officers

Supplying and PAINTING the old wall surface with two coat of synthetic enamel paint over the existing priming coat. The rate is inclusive of cost of all materials and labour, brushes etc.. complying with standard specification.

Charges for repairing the damaged plastered surface chipping and chissiling the damaged surface and removing the loosened portions and than finishing the same surface with cement mortar 1:3(one cement and three sand ) with an average thickness of more than 25mm tk in two layers not more than 12mm tk(for each layers) including providing necessary scaffolding arrangements with required casurina poles cost of coir labour etc including cost and conveyance of all material required for above work & labour charges for all works as directed by the corporation officers.

Renewing and fixing 15mm diameter Brass Chromium plated heavy type screw down Tap of approved make conforming to ISI Specification and quality including cost of cotton thread, white lead etc complying with standard specification (screw down traps are to be got approved by the Exective Engineer before use on work)

Supplying and fixing in position best white glazed earthenware Oriya type INDIAN WATER CLOSET of approved quality of size 584mm with 'P' or 'S' trap and embedding the closet with trap to shape in position with 40mm brick jelly concrete 1:2:5 (One lime, two sand and five brick jelly) and finishing the top to the required slope and including giving connection to the C.I. soil stacks by dismantling the masonry floor or RCC works and redoing the same to the original condition without any leakage etc., complete as directed by the departmental officers.( The water closet should be got approved by the departmental officer before use on work )

Supplying and fixing in position best white colour EUROPEAN WATER CLOSET of approved Quality with 'P' or 'S' trap with double flapped seat cover 12.50 lits capacity pvc low lavel flshing tank inculding all internal fittings fixed on c i brackets 12mm pvc or brass nipple cromium plated brown headed stop cock ,12mm niylon connection with nessary teekwood plges ,cews to the portion coming with walls and floors,including dismantling masnory and redoing the to the original condition etc., complete as directed by the departmental officers.( The water closet should be got approved by the departmental officer before use on work )