M/o Completed Schemes under Nazul A/C-II (HZ)

SCHEDULE-'A' Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (a) All kinds of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. (a) All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (a) Cement mortar 1:6 (1 cement : 6 coarse sand)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

40 mm thick fine dressed stone on top of seat wall/flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. (a) Red sand stone

White sand stone gang saw cut of 30 mm thick machine cut edges in riser, seat wall on 12 mm average thick cement mortar 1:3 ( 1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete.

Providing an fixing SBR (Styrene Butadiene Rubber) tile flooring 24 mm thick with group arrangement of approved colour, design and fixing with P.U. adhesive for reliable and durable bonding with sub-base all complete and as per approved by Engineer-in-charge.

Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. (a) All kinds of soil )

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (a) 40 mm thick with 20 mm nominal size stone aggregate

Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.

SCHEDULE-'B' Providing & Installing the Mini Play House of make ARIHANT /KOMPAN/ LANDSCAPE STRUCTURES /OK PLAY/LEO/ KAALIA of size 6.0x1.80mtr with Slide. Main Frame made of Round 80 NB Pipe Having min "B" class GL. pipe. All the pipes should be ISI Marked (as per the IS 1239/2004) & of reputed brand. Ensuring the strength, durability, stability & long life to the kids structure with safety as paramount. Deck: having 1035mm x750mm with collar of 65mm size made of perforated sheet. Hydraulic Precision punched holes made of min 10mm NB with sheet thickness of approx. 2.5mm. Components- FRP (Fiber Reinforced Plastic) Main Sunshine Line designer Roof having min 2- 4 layers (approx.4mm thíckness) with bright colours being UV resistant ladder main frame made of round pipe 25mm NB pipe & Ladder rungs made of 15mm N.B. pipe having width of 400mm x 70mm(approx.). All the pipes should be ISI marked (as per the IS1239/2004) & of reputed brand. Tree climber made of main frame pipe of 25mm NB round pipe & rungs made of 20mm NB round pipe. All the pipes should ben ISI marked(as per the IS 1239/2004) & of reputed brand.Spring cod climber made of main frame pipe of 25mm NB round pipe &spring made of 20mm NB round pipe. All the pipes should be IS marked(as per IS 1239/2004) & of reputed brand A Rotomolded plastic LLDPE made Line panel with UV stabilied colour fading resistant. Having size of 1035m x 750 mm & thickness of 70mm heavy &strong for long term durability great asthetic look and finish, Safety panel fitted on MS round pipe 20mm NB with size 1035mm(L)x750mm(W) having wall thickness 70mm Slide having height of 1220mm approx. & length approx. 2 mtr made of metallic GI sheet of high strength having width of 400mm mounted on MS angle support of 40x40x5mm & 5 nos angle supports & 20mm NB round pipe hand rail The ladder step of metallic slide should made of MS rectangular pipe of 70x23 mm in minimum thickness of 2mm with vertical hand rail support of size 20mm NB G.I. pipe with other necessary supporting pipes The complete structure mini play house should be powder coated with minimum powder coating thíckness of 60-80 microns.Safety panel/top canopy should be also attached with help of colorful nylon clamps. Accessories: Nut bolts- All approved Gl nut bolts Galvanised Iron with High tensile Strength. Kid capacity 2-8 Nos. All Complete as per drawings attached/as per the direction of Engineer-in Charge including maintenance cost for 1st Year.

Providing & Installing the Double Arch Swing of make ARIHANT /KOMPAN/LAND SCAPE STRUCTURES / OK PLAY/LEO/KAALIA of size 3.10x1.50mtr. Main Frame:- Main Cross Bar made of round 75mm O.D. pipe and legs made of 50mm NB. pipe Legs- Arch shaped bended (Must be min in GI"B class pipe). T pipe will be required for the Cross bar. All the pipes should be ISI marked( as per the IS 1239/2004) & of reputed brand. Ensuring the Strength, durability, stablity & long life to the Kids. structure with safety as paramount. Seats- Belt Type Seats made of Synthetic Rubberized material/Fiber reinforced fabric materials of Virgin Reinforced material & also duly with UV resistant colors, Chain Made of approx 6mm thick G.I. chain with rubberized coating of with 3 mm minimum thickness, Chorme plated supporting hook for belts Hooks for convenience & height adjustment/ Seat Movement, self lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. The complete structure double arc swing should be powder coated with minimum powder coating thickness of 60-80 microns. Accessories: Nut bolts to be used All approved Gl nut bolts Galvanised Iron with High tensile Strength. Kid capacity 2-4 Nos. All Complete as per drawings attached/as per the direction of Engineer-in Charge including maintenance cost. for 1st Year.

Providing & Installing the SEA SAW DOUBLE of make ARIHANT /KOMPAN/ LAND SCAPE STRUCTURES /OK PLAY/LEO/ KAALIA of size 2.0x2.50mtr.Main Frame: made of see saw made of 50mm NB pipe with planks made of 40mm NB pipe and supports made of 20mm NB. pipe, all the GI pipes should be "B" class & ISI marked (as per the IS 1239/2004)& of reputed brand make & Ensuring the Strength, durability, stability & long life to the kids structure with safety as paramount. Seats - Seat Made of FRP (Fiber Reinforced Plastic), duly UV resistant colors, all chemicals in the FRP material should be best quality, the Fibre Mat of 450GSM to be used for strength & stability with supporting frame. FRP Seat size(approx.) 10"(L) x 8" (W) with back rest. The complete structure see saw double should be powder coated with minimum powder coating thickness of 60-80 microns Accessories: Nut bolts- All approved GI nut bolts Galvanised Iron with High tensile Strength Kid capacity -4 nos. Complete as per drawings attached. All Complete as per drawings attached/as per the direction of Engineer-in Charge including maintenance cost for 1st Year.

Providing & Installing the SINGLE WAVE CLIMBER of make ARIHANT /KOMPAN/ LAND SCAPE STRUCTURES/OK PLAY/LEO/KAALIA of size 1.75x0.80mtr. Main Frame: Main Frame of single wave climber pipe made of round 32mm NB pipe (Must be min in GI"B" class pipe) and rungs made of 20mm N.B. Pipe - 'U Shaped bended( will thickness approx. min 1.5mm - 2.2.mm only), All the pipesshould be ISI marked(as per the IS 1239/2004 & of reputed brand & Ensuring the Strength, durability, stability & long life to the kids structure with safety as paramount. The complete structure single wave climber should be powder coated with minimum powder coating thickness of 60-80 microns Accessories: Nut bolts- All approved Gl nut bolts Galvanised Iron with High tensile Strength Kid Capacity - 2 to 4 Nos. All Complete as per drawings attached/as per the direction of Engineer-in Charge including maintenance cost for 1st Year.

Providing & Installing the TODDLER SWING of make ARIHANT /KOMPAN /LAND SCAPE STRUCTURES/OK PLAY/LEO/KAALIA of size 2.40x1.50mtr. Main Frame:- Main Cross Bar of toddler swing made of round 65mm NB pipe and Supporting T Bar made of 50mm N.B. Pipe (main cross bar & T supporting Bar should be in GI "B" class pipe All the Pipes should be ISI Marked( as per the IS 1239/2004) & of reputed brand make with good wall thickness. Ensuring the Strength, durability, stability & long life to the kids structure with safety as paramount. Seats- Bucket Type Seat Made of Synthetic Rubberized material or Virgin Plastic material & also duly with UV resistant colors, Chain Made of approx 6mm thick G,I chain with rubberized coating of with 3 mm minimum thickness, Chorme plated supporting hook for belts Hooks for convenience & height adjustment/ Seat Movement, self lubricated council type bush baring clamps provided with rubber coated chain Toddler Swing to hang the complete bucket assebbly. The complete structure should be powder coated with minimum powder coating thickness of 60-80 microns. Accessories: Nut bolts to be used All approved Gl nut bolts Galvanised Iron with High tensile Strength. Kids capacity 2 & Recommended Age Group - 2 to 8 yrs. All Complete as per drawings attached/as per the direction of Engineer-in Charge including maintenance cost for 1st Year.

Deduct for Buy back of Double arch swing including all required dismantling works and disposal all complete as per Direction of Engineer-In-charge.

SCHEDULE-'C' Maintenance charges for children Play equipments 5 Nos. (S.No.15 to 20). a) For 2nd year

b) 3rd year

Less correction factor on DSR 2023 on account of GST @ 0.973 (item no. 1.00 to 14.00)