To Provide Functional Household Tap connection to Rural Households in 2 Village Panchayats in Tirukoilur Panchayat Union in Kallakurichi District for 2020-21 Package TNKKI/JJM 20-21/024

Amount

Providing FHTC To Senganankollai Village in Senganankollai Panchayat

Provision for FHTC's(8 meter length per FHTC)

Restoration of the Road for Road cut portion

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

PROVIDING PUMPING MAIN LINE

Supply,delivery, laying and jointing of 90mm OD PVC 4Ksc pipe inlcuding earth work excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by TWAD Board Officer.

Supply of PVC specials as per BIS 10124/1988 Part 1 to 13 &BIS 7834/1975 with ISI Marks to site of works

a.90mm PVC Bend

b 90mm PVC Threaded coupler

DISTRIBUTION MAIN - Fixing of Water meter

Supply,delivery, laying and jointing of 63mm OD PVC 4Ksc pipe inlcuding earth work excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by TWAD Board Officer.

Supply and delivery of GI pipes medium class as per IS.1239/part I/ 1990 to site of work with ISI Marking

a.50mm GI pipe-page 25 sl.no 6

Supply and delivery of GI specials to site of work as per IS specification with ISI marking

a.50mm GI Elbow page 25 sl.no 1

Laying and jointing of GI Pipes with GI specials and PVC specials etc

a.50 mm dia Pipe

B.T. Roads (or) Maccadam road

C.C. Roads

Provision for gate value 50 mm Si.no.5.2 P.g.no.30

Submersible Pump set and Accessories

Geophysical Investigation charges

Drilling of 150 mm dia Vertical Hard rock borewell in hard rock areas to the required depth and as directed by the TWAD Board Officers including transportation charges for the rigs and supporting vehicles from one place to another place

Supply and delivery of 150 mm dia PVC Casing Pipe etc…..

Supply and delivery of vertical wet type submersible pumpset (7.5 HP) capable of discharging any of the following pumpage in lpm against noted head in m suitable for erection into the bore well/Inf. well / open well with stainless steel shaft, bronze impeller and starter.

Supply, delivery and erection of Submersible Pumpset of (125 LPM X 200M Head)

Supply and delivery of 3 phase Panel Board D.O.L with two level guard and auto start confirming to IS specification for 7.5 HP pumpset.

Supply, delivery of 1.1 KV Grade,PVC insulated and sheathed 3 core flat copper submersible cable with ISI marking conforming of IS 694/1990 of reputed make for submersible motor erected in borewell.

Supply and delivery of 150 mm dia PVC Casing Pipe etc…..

Supply and delivery of GI medium class pipes and specials as per relevant IS as listed below.

50mm UPVC Pipe (3m) length Medium SOR TWAD page 9

50mm GI Bend Heavy page 29

50mm GI Flangeset Heavy page 29

50mm MS Clampset Heavy page 29

50mm GM Non Return Valve page 30

50 x 40mm GI reducer heavy page 26

63mX50mm PVC T.Coupler page 10

40mm Ball Valve/ GM Gate Valve page 30

Lighting the pumpromm including internal wiring with switch circute fuses etc. with the following light fittings with ISI marking.

40W box type tube light - 1 No.

100W bulb with angle holder

100W bulk head fittings

5 AMPS 3 pin socket with switch

5 Amps switches for light(Flush type)

Providing lighting wiring using MS conduit pipes and specials with 2 runs 1.5 sqmm PVC copper wire and 1 run 12 swg GI wire for earthing for light, fans and 5A plug points etc.,

Obtaining power supply including cost of following materials and by engaging B licence holder.EB fee for application form and deposit amount will be borne by the Board

(i) Aerial fuse board of size 15 x 10 x 6cm with 32 A aerial fuse carrier(3 Nos.)

(iii)Wall mounting type MS cubical EB meter box with fuse carrier (3 Nos) of 32 A capacity at EB supply point.This box is also to accommodate TNEB energy meter with proper ventilation as approved by TNEB.

(ii) Supply and laying of 7/20 size PVC insulator copper conductor cable from Aerial fuse to EB supply point etc., complete as per I.E Rules.

25mm dia GI pipe for service point

25mm dia GI Elbow

No.8 GI wire for earth(Twin earthing)

Stay wire 7/20

20mm GI pipe for twin earthing and cable encasing

4way nutral link

TW banel board (41 x 31 x 6cm)

Labour charges for erection of submersible pump set including fixing and jointing the submersible cable with clamps to the required depth, valves and errection panel board control room twin earthing as per I.E Rules including cost of civil works

Upto 7.5 HP

Construction of Bore pit arrangements complete ect.

Material Testing Charges @ Government Lab

Provisin for Name Board

Provision for Photograph charges

Providing FHTC To Senganankollai Colony in Senganankollai Panchayat

Construction of 30,000 Ltr Capacity OHT 12.00 m Stagging Height

Earth work excavation and depositing on bank with intial lead and lift in all clasuses of soil such as Hard Gravely soil, Gravely soil except Hard Rock requiring Blasting etc complete as per SS20B for narrow foundation

First Depth 0.0 m - 2.0 m below GL

Second Depth from 2 . 0 m - 4 . 0 m below GL

Filling in the foundation with filling M Sand including cost and conveyance to the site and all labour charges for filling as per standard specifications

Foundation

Cement Concrete 1:4:8 mix using 40mm ISS HBG stone jelly and M Sand for Foundation and flooring including cost,conveveyance of all materials and labour charges to laid in layers not more than 15cm thick, well rammed etc, complete with standard specification

Foundation

Cement Concrete 1:4:8 mix using 40mm ISS HBG stone jelly and M Sand for Foundation and flooring including cost,conveveyance of all materials and labour charges to laid in layers not more than 15cm thick, well rammed etc, complete with standard specification

Below GL from 1.50 m - 4.50 m

Below 1.50m from GL

0.0m to 4.50 m above GL

4.50 m to 7.32 above GL

7.32 M TO 10.98M above GL

10.98 M TO 14.64 M above GL

14.64M TO 18.30M above

Supplying and Erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers. Rate for 10m2 for the following items (RCC floor slab, roff slab, Rectangular / Square, Tee/ Ell beams, Lintels, StairCase Waist Slablanding slab landing beam Canopy etc in all floors with all cross Bracings using mild steel sheets of size 90cm x 60cm and 10BG stiffened withmild steel angles of size 25mmx3mm for boarding laid over country wood joists of size 10cmx6.50cm spaced at about 90cm centre to centre and supported by Casurina props of 10cm to 13cm dia spaced at 75cm centre etc, complete and as directed.

Plain surface Below GL

From GL - 3.30 m

From 5.30 m to 6.30 m above GL

From 8.30m to 9.30m above GL

From 11.30 m to 12.30 m

Curved surface 0.00 to 3.30 m

Square column

Below GL

Above GL TO 3.30 m

From 3.31m to 4.30 M

From 4.31m to 5.30 M

From 5.31m to 6.30 M

From 6.31m to 7.30 M

From 7.31m to 8.30 M

From 8.31m to 9.30 M

From 9.31m to 10.30 M

From 10.31m to 11.30 M

From 11.31m to 11.45 M

Supplying, Fabricatung and placin g in position of RTS or MS rod for all reinforced cement concrete works as per design given including cost of steel and binding wire in all floors etc,complete complying with standard specification

As per schedule in MT

Painting Two Coats with approved Cement Paint over the Plastered surface over one coat of Whie Cement including cost of all materials and labour charges etc complete

Fabrication,Supply,delivery and fixing of Out side MS Lader of 45 cm clear wide made out of 50 mm x 50 mm x 6mm MS Angle for both sides and for steps at 30 cm c / c welded jointed etc., for I staging from GL to FIRST Brace ( weight 4.50 kg/m ) Second and Third stagging upto Floor slab and Fourth Stagging from Floor Slab Roof Top Cover Slab.Supply,Delivery and Fixing of 32 mm GI Pipes medium for Hand Rails from First stage to Fourth Stage. RCC M30 Grade mix for Landing SlabFive Nos at Ground Level - 1 No and above Ground Level - 4 Nos . Supply and fixing of 32 mm Dia GI Pipes for Landing Slab .Supply and fixing of MS Base Plate of 100 mm x 100 mm x 6 mm thick for fixing Anchore fastener bolt for fixing of Hand Rails at Landing Slab and MS Ladder providing Locking arrangements with two coats of approved Enamel Paint over one coat of redoxide paint as per approved Type Design

Providing and fixing of R C C inner acess ladder in R C C 1:1.5:3 USING 20MM hbg stone for OHT including cost of reinforcement , placing grill in position, centering shuttering , mixing concrete curing etc.,

Providing 110mm AC Vent cowl arrangements mosquito proof nylon net as directed by dept officer

Providing Cut stone slab in CM AC Vent cowl arrangements mosquito proof nylon net as directed by dept office

Providing Man hole Cover of size 0.60m x0.60m in Rc c 1:1.5:3 with suitable Reinforcement and 50 x50x6mm MS angle fixed along edges and as directed by dept officer

Provision for pipe Inlet and Outlet flow

65 mm GI Pipe Inlet

65 mm GI Pipe Over Flow

65 mm GI Pipe Deleivery

50 mm GI Pipe for Scour

90 mm PVC Thread Coupler

75 mm PVC Thread Coupler

63 mm PVC Thread Coupler

65 mm GI Tee

65 GI Ell

65 x 50 mm GI Reducer

75 mm X 63 mm PVC Reducer

65 mm GI Union

65 mm GI Flange

65 mm GI Coupling

65 mm Gate Valve

50 mm Gate Valve

Refilling the foundation with excavated earth including consolidation as directed by dept officer

Labour charges for GI Pipe connection to the OHT , for inlet, out let ,overflow pipe and scour arrangements including cutting and threading , earth work excavation & refilling

Providing Hand rails over the Roof slab by using 32 mm GI Pipe with 40mm x6mm MS Flate and fixied with 12mm dia fastner bolt 75mm long and as directed by dept officer

Name Board

Photo Charges

Add 15 % extra cost Escalation

Provision for FHTC's(8 meter length per FHTC)

Restoration of the Road for Road cut portion

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

PROVIDING PUMPING MAIN LINE

Supply,delivery, laying and jointing of 90mm OD PVC 4Ksc pipe inlcuding earth work excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by TWAD Board Officer.

Supply of PVC specials as per BIS 10124/1988 Part 1 to 13 &BIS 7834/1975 with ISI Marks to site of works

a.90mm PVC Bend

b 90mm PVC Threaded coupler

DISTRIBUTION MAIN - Fixing of Water meter

Supply,delivery, laying and jointing of 63mm OD PVC 4Ksc pipe inlcuding earth work excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by TWAD Board Officer.

Supply and delivery of GI pipes medium class as per IS.1239/part I/ 1990 to site of work with ISI Marking

a.50mm GI pipe-page 25 sl.no 6

Supply and delivery of GI specials to site of work as per IS specification with ISI marking

a.50mm GI Elbow page 25 sl.no 1

Laying and jointing of GI Pipes with GI specials and PVC specials etc

a.50 mm dia Pipe

B.T. Roads (or) Maccadam road

C.C. Roads

Provision for gate value 50 mm Si.no.5.2 P.g.no.30

Submersible Pump set and Accessories

Geophysical Investigation charges

Drilling of 150 mm dia Vertical Hard rock borewell in hard rock areas to the required depth and as directed by the TWAD Board Officers including transportation charges for the rigs and supporting vehicles from one place to another place

Supply and delivery of 150 mm dia PVC Casing Pipe etc…..

Supply and delivery of vertical wet type submersible pumpset (7.5 HP) capable of discharging any of the following pumpage in lpm against noted head in m suitable for erection into the bore well/Inf. well / open well with stainless steel shaft, bronze impeller and starter.

Supply, delivery and erection of Submersible Pumpset of (125 LPM X 200M Head)

Supply and delivery of 3 phase Panel Board D.O.L with two level guard and auto start confirming to IS specification for 7.5 HP pumpset.

Supply, delivery of 1.1 KV Grade,PVC insulated and sheathed 3 core flat copper submersible cable with ISI marking conforming of IS 694/1990 of reputed make for submersible motor erected in borewell.

Supply and delivery of 150 mm dia PVC Casing Pipe etc…..

Supply and delivery of GI medium class pipes and specials as per relevant IS as listed below.

50mm UPVC Pipe (3m) length Medium SOR TWAD page 9

50mm GI Bend Heavy page 29

50mm GI Flangeset Heavy page 29

50mm MS Clampset Heavy page 29

50mm GM Non Return Valve page 30

50 x 40mm GI reducer heavy page 26

63mX50mm PVC T.Coupler page 10

40mm Ball Valve/ GM Gate Valve page 30

Lighting the pumpromm including internal wiring with switch circute fuses etc. with the following light fittings with ISI marking.

40W box type tube light - 1 No.

100W bulb with angle holder

100W bulk head fittings

5 AMPS 3 pin socket with switch

5 Amps switches for light(Flush type)

Providing lighting wiring using MS conduit pipes and specials with 2 runs 1.5 sqmm PVC copper wire and 1 run 12 swg GI wire for earthing for light, fans and 5A plug points etc.,

Obtaining power supply including cost of following materials and by engaging B licence holder.EB fee for application form and deposit amount will be borne by the Board

(i) Aerial fuse board of size 15 x 10 x 6cm with 32 A aerial fuse carrier(3 Nos.)

(iii)Wall mounting type MS cubical EB meter box with fuse carrier (3 Nos) of 32 A capacity at EB supply point.This box is also to accommodate TNEB energy meter with proper ventilation as approved by TNEB.

(ii) Supply and laying of 7/20 size PVC insulator copper conductor cable from Aerial fuse to EB supply point etc., complete as per I.E Rules.

25mm dia GI pipe for service point

25mm dia GI Elbow

No.8 GI wire for earth(Twin earthing)

Stay wire 7/20

20mm GI pipe for twin earthing and cable encasing

4way nutral link

TW banel board (41 x 31 x 6cm)

Labour charges for erection of submersible pump set including fixing and jointing the submersible cable with clamps to the required depth, valves and errection panel board control room twin earthing as per I.E Rules including cost of civil works

Upto 7.5 HP

Construction of Bore pit arrangements complete ect.

Material Testing Charges @ Government Lab

Provisin for Name Board

Provision for Photograph charges

Providing FHTC To Aviyur Colony in Aviyur Panchayat

Provision for FHTC's(8 meter length per FHTC)

Restoration of the Road for Road cut portion

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

DISTRIBUTION MAIN - Fixing of Water meter

Supply,delivery, laying and jointing of 63mm OD PVC 4Ksc pipe inlcuding earth work excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by TWAD Board Officer.

Supply and delivery of GI pipes medium class as per IS.1239/part I/ 1990 to site of work with ISI Marking

a.50mm GI pipe-page 25 sl.no 6

Supply and delivery of GI specials to site of work as per IS specification with ISI marking

a.50mm GI Elbow page 25 sl.no 1

Laying and jointing of GI Pipes with GI specials and PVC specials etc

a.50 mm dia Pipe

C.C. Roads

Provision for gate value 50 mm Si.no.5.2 P.g.no.30

Material Testing Charges @ Government Lab

Provisin for Name Board

Provision for Photograph charges

Providing FHTC To Avipudhur Village in Aviyur Panchayat

Provision for FHTC's(8 meter length per FHTC)

Restoration of the Road for Road cut portion

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

DISTRIBUTION MAIN - Fixing of Water meter

Supply,delivery, laying and jointing of 63mm OD PVC 4Ksc pipe inlcuding earth work excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by TWAD Board Officer.

Supply and delivery of GI pipes medium class as per IS.1239/part I/ 1990 to site of work with ISI Marking

a.50mm GI pipe-page 25 sl.no 6

Supply and delivery of GI specials to site of work as per IS specification with ISI marking

a.50mm GI Elbow page 25 sl.no 1

Laying and jointing of GI Pipes with GI specials and PVC specials etc

a.50 mm dia Pipe

C.C. Roads

Provision for gate value 50 mm Si.no.5.2 P.g.no.30

Material Testing Charges @ Government Lab

Provisin for Name Board

Provision for Photograph charges

Providing FHTC To Aviyur Village in Aviyur Panchayat

Provision for FHTC's(8 meter length per FHTC)

Restoration of the Road for Road cut portion

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

PROVIDING PUMPING MAIN LINE

Supply,delivery, laying and jointing of 90mm OD PVC 4Ksc pipe inlcuding earth work excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by TWAD Board Officer.

Supply of PVC specials as per BIS 10124/1988 Part 1 to 13 &BIS 7834/1975 with ISI Marks to site of works

a.90mm PVC Bend

b 90mm PVC Threaded coupler

DISTRIBUTION MAIN - Fixing of Water meter

Supply,delivery, laying and jointing of 63mm OD PVC 4Ksc pipe inlcuding earth work excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by TWAD Board Officer.

Supply and delivery of GI pipes medium class as per IS.1239/part I/ 1990 to site of work with ISI Marking

a.50mm GI pipe-page 25 sl.no 6

Supply and delivery of GI specials to site of work as per IS specification with ISI marking

a.50mm GI Elbow page 25 sl.no 1

Laying and jointing of GI Pipes with GI specials and PVC specials etc

a.50 mm dia Pipe

C.C. Roads

Provision for gate value 50 mm Si.no.5.2 P.g.no.30

Submersible Pump set and Accessories

Geophysical Investigation charges

Drilling of 150 mm dia Vertical Hard rock borewell in hard rock areas to the required depth and as directed by the TWAD Board Officers including transportation charges for the rigs and supporting vehicles from one place to another place

Supply and delivery of 150 mm dia PVC Casing Pipe etc…..

Supply and delivery of vertical wet type submersible pumpset (7.5 HP) capable of discharging any of the following pumpage in lpm against noted head in m suitable for erection into the bore well/Inf. well / open well with stainless steel shaft, bronze impeller and starter.

Supply, delivery and erection of Submersible Pumpset of (125 LPM X 200M Head)

Supply and delivery of 3 phase Panel Board D.O.L with two level guard and auto start confirming to IS specification for 7.5 HP pumpset.

Supply, delivery of 1.1 KV Grade,PVC insulated and sheathed 3 core flat copper submersible cable with ISI marking conforming of IS 694/1990 of reputed make for submersible motor erected in borewell.

Supply and delivery of 150 mm dia PVC Casing Pipe etc…..

Supply and delivery of GI medium class pipes and specials as per relevant IS as listed below.

50mm UPVC Pipe (3m) length Medium SOR TWAD page 9

50mm GI Bend Heavy page 29

50mm GI Flangeset Heavy page 29

50mm MS Clampset Heavy page 29

50mm GM Non Return Valve page 30

50 x 40mm GI reducer heavy page 26

63mX50mm PVC T.Coupler page 10

40mm Ball Valve/ GM Gate Valve page 30

Lighting the pumpromm including internal wiring with switch circute fuses etc. with the following light fittings with ISI marking.

40W box type tube light - 1 No.

100W bulb with angle holder

100W bulk head fittings

5 AMPS 3 pin socket with switch

5 Amps switches for light(Flush type)

Providing lighting wiring using MS conduit pipes and specials with 2 runs 1.5 sqmm PVC copper wire and 1 run 12 swg GI wire for earthing for light, fans and 5A plug points etc.,

Obtaining power supply including cost of following materials and by engaging B licence holder.EB fee for application form and deposit amount will be borne by the Board

(i) Aerial fuse board of size 15 x 10 x 6cm with 32 A aerial fuse carrier(3 Nos.)

(iii)Wall mounting type MS cubical EB meter box with fuse carrier (3 Nos) of 32 A capacity at EB supply point.This box is also to accommodate TNEB energy meter with proper ventilation as approved by TNEB.

(ii) Supply and laying of 7/20 size PVC insulator copper conductor cable from Aerial fuse to EB supply point etc., complete as per I.E Rules.

25mm dia GI pipe for service point

25mm dia GI Elbow

No.8 GI wire for earth(Twin earthing)

Stay wire 7/20

20mm GI pipe for twin earthing and cable encasing

4way nutral link

TW banel board (41 x 31 x 6cm)

Labour charges for erection of submersible pump set including fixing and jointing the submersible cable with clamps to the required depth, valves and errection panel board control room twin earthing as per I.E Rules including cost of civil works

Upto 7.5 HP

Construction of Bore pit arrangements complete ect.

Material Testing Charges @ Government Lab

Provisin for Name Board

Provision for Photograph charges

Providing FHTC To Hydrapakkam in Aviyur Panchayat

Provision for FHTC's(8 meter length per FHTC)

Restoration of the Road for Road cut portion

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

PROVIDING PUMPING MAIN LINE

Supply,delivery, laying and jointing of 90mm OD PVC 4Ksc pipe inlcuding earth work excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by TWAD Board Officer.

Supply of PVC specials as per BIS 10124/1988 Part 1 to 13 &BIS 7834/1975 with ISI Marks to site of works

a.90mm PVC Bend

b 90mm PVC Threaded coupler

DISTRIBUTION MAIN - Fixing of Water meter

Supply,delivery, laying and jointing of 63mm OD PVC 4Ksc pipe inlcuding earth work excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by TWAD Board Officer.

Supply and delivery of GI pipes medium class as per IS.1239/part I/ 1990 to site of work with ISI Marking

a.50mm GI pipe-page 25 sl.no 6

Supply and delivery of GI specials to site of work as per IS specification with ISI marking

a.50mm GI Elbow page 25 sl.no 1

Laying and jointing of GI Pipes with GI specials and PVC specials etc

a.50 mm dia Pipe

C.C. Roads

Provision for gate value 50 mm Si.no.5.2 P.g.no.30

Submersible Pump set and Accessories

Geophysical Investigation charges

Drilling of 150 mm dia Vertical Hard rock borewell in hard rock areas to the required depth and as directed by the TWAD Board Officers including transportation charges for the rigs and supporting vehicles from one place to another place

Supply and delivery of 150 mm dia PVC Casing Pipe etc…..

Supply and delivery of vertical wet type submersible pumpset (7.5 HP) capable of discharging any of the following pumpage in lpm against noted head in m suitable for erection into the bore well/Inf. well / open well with stainless steel shaft, bronze impeller and starter.

Supply, delivery and erection of Submersible Pumpset of (125 LPM X 200M Head)

Supply and delivery of 3 phase Panel Board D.O.L with two level guard and auto start confirming to IS specification for 7.5 HP pumpset.

Supply, delivery of 1.1 KV Grade,PVC insulated and sheathed 3 core flat copper submersible cable with ISI marking conforming of IS 694/1990 of reputed make for submersible motor erected in borewell.

Supply and delivery of 150 mm dia PVC Casing Pipe etc…..

Supply and delivery of GI medium class pipes and specials as per relevant IS as listed below.

50mm UPVC Pipe (3m) length Medium SOR TWAD page 9

50mm GI Bend Heavy page 29

50mm GI Flangeset Heavy page 29

50mm MS Clampset Heavy page 29

50mm GM Non Return Valve page 30

50 x 40mm GI reducer heavy page 26

63mX50mm PVC T.Coupler page 10

40mm Ball Valve/ GM Gate Valve page 30

Lighting the pumpromm including internal wiring with switch circute fuses etc. with the following light fittings with ISI marking.

40W box type tube light - 1 No.

100W bulb with angle holder

100W bulk head fittings

5 AMPS 3 pin socket with switch

5 Amps switches for light(Flush type)

Providing lighting wiring using MS conduit pipes and specials with 2 runs 1.5 sqmm PVC copper wire and 1 run 12 swg GI wire for earthing for light, fans and 5A plug points etc.,

Obtaining power supply including cost of following materials and by engaging B licence holder.EB fee for application form and deposit amount will be borne by the Board

(i) Aerial fuse board of size 15 x 10 x 6cm with 32 A aerial fuse carrier(3 Nos.)

(iii)Wall mounting type MS cubical EB meter box with fuse carrier (3 Nos) of 32 A capacity at EB supply point.This box is also to accommodate TNEB energy meter with proper ventilation as approved by TNEB.

(ii) Supply and laying of 7/20 size PVC insulator copper conductor cable from Aerial fuse to EB supply point etc., complete as per I.E Rules.

25mm dia GI pipe for service point

25mm dia GI Elbow

No.8 GI wire for earth(Twin earthing)

Stay wire 7/20

20mm GI pipe for twin earthing and cable encasing

4way nutral link

TW banel board (41 x 31 x 6cm)

Labour charges for erection of submersible pump set including fixing and jointing the submersible cable with clamps to the required depth, valves and errection panel board control room twin earthing as per I.E Rules including cost of civil works

Upto 7.5 HP

Construction of Bore pit arrangements complete ect.

Material Testing Charges @ Government Lab

Provisin for Name Board

Provision for Photograph charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

VENU SEETHARAMAN