SPECIAL REPAIRS / REPLACEMENT OF OLD VINTAGE CI AND GI DISTRIBUTION WATER PIPELINE AT MH OF AGE E/M DEOLALI, SPECIAL REPAIRS TO BLDG NO. P234B, P235B, P236B, P237B OR TOILETS BLOCK AT 317 FD REGT/7 FD REGT OF AGE B/R H/L AND PROVN OF THREE OBSN P

Amount

Taking up or down steel tubing and connection from excavated trenches or on walls or in floor etc 15 mm bore complete.

Taking up or down steel tubing and connection from excavated trenches 100 mm bore complete.

Taking up or down steel tubing and connection from excavated trenches 80 mm bore complete.

Taking up or down steel tubing and connection from excavated trenches 50 mm bore complete.

Taking up or down steel tubing and connection from excavated trenches 40 mm bore complete.

Taking up or down steel tubing and connection from excavated trenches 25 mm bore complete.

Taking up or down steel tubing and connection from excavated trenches 20 mm bore complete.

Taking down Unserviceable Sluice valve of any size

Taking down Unserviceable gate valve of any size

Excavation in trenches in soft/loose soil not exc 1.5 mtr wide and not exc 1.5 mtr deep in for water pipe line etc and getting out, trimming the sides, forming bottom surfaces to required level complete all as specified and directed by Engr-in-charge.

Excavation in trenches in hard/ dense soil not exc 1.5 mtr wide and not exc 1.5 mtr deep in for water pipe line etc and getting out, trimming the sides, forming bottom surfaces to required level complete all as specified and directed by Engr-in-charge.

Returning, filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 250mm thick after cable are laid and tested all as specified and directed.

Removing excavated material (Surplus soil upto) to a distance not exc 50m and depositing where directed at level not exc. 1.5m above the starting point all as specified and directed.

Cutting through existing bituminous road /PCC/floor/approx size width 60cm X 70cm depth along cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairsing the road to match with the original finish.

Supply , lay, connect and test GI tubing 15mm bore medium grade ISI marked with all fittings and fixed complete walls and ceilings or laid in floors etc complete all as specified and as directed.

Galvanised iron steel tubing ,100 MM borre, medium grade, with all fittings, ISI marked supplied and laid in tranches, fixing on wall, ceiling as directed by engr-in-charge.

Ditto all as per Item No 16 above but 80mm bore.

Ditto all as per Item No 16 above but 50mm bore.

Ditto all as per Item No 16 above but 40mm bore.

Ditto all as per Item No 16 above but 25mm bore.

Ditto all as per Item No 16 above but 20mm bore.

S/F gun metal gate valves with iron wheel head, ISI marked srewed both ends for iron pipes of 50mm size.

All as per item no. 22 above but 40mm dia

All as per item no. 22 above but 25mm dia

All as per item no. 22 above but 20mm dia

Taking up existing CI pipe lines from exacavated trenches including removing/burning of lead joints for the following sizes:-

150mm bore

100mm bore

Material and labour for CI spun pipes centrifugally cast Class LA suitable for tyton joint (rubber ring ) of the following sizes complete all as specified and all as directed :-

150 mm bore

100 mm bore

Supply,fix and testing cast iron sluice valve of 80mm bore, including joints and jointing materials, withstainless steelmetal spindle both ends flanged and drilled,bannet wedge stuffing box, gland thrust plate,hand wheel made out of grey cast iron,complete valve and its fittings suitable PN1.6 ISI marked Note:- Fittings and specials shall be measured and paid seperately under respective items of this schedule.

Supply,fix and testing cast iron sluice valve of 100 mm bore, including joints and jointing materials, withstainless steelmetal spindle both ends flanged and drilled,bannet wedge stuffing box, gland thrust plate,hand wheel made out of grey cast iron,complete valve and its fittings suitable PN1.6 ISI marked Note:- Fittings and specials shall be measured and paid seperately under respective items of this schedule.

Supply,fix and testing cast iron sluice valve of 150 mm bore, including joints and jointing materials, withstainless steelmetal spindle both ends flanged and drilled,bannet wedge stuffing box, gland thrust plate,hand wheel made out of grey cast iron,complete valve and its fittings suitable PN1.6 ISI marked Note:- Fittings and specials shall be measured and paid seperately under respective items of this schedule.

M&L for Construction of valve pit chamber having internal diamensions 900mmx900mmx900mm, PCC in 1:4:8 type D-2 using 40mm stone aggregates for foundation of 100mm thick, brick work with cement mortor 1:4, PCC coping 75mm thick in 1:3:6 using 20mm stone aggregates, rendering cement plaster 15mm thick internally all around and externally upto 300mm from top. M&L for fabrication of MS cover including embadded to chamber, using 45x45x5mm angle iron, MS plate of size 1200mmx1050mm and 2.0mm thick, handle made out of flat iron of size 25x4mm, butt hinges, heavy weight, cold rolled mild steel of size 125mm -02 Nos. M&L for painting to steel surfaces with two coats of synthetic anamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-charge.

S&F Cast iron fittings for pipes size upto 150mm bore, bends( any type, radius and angle) tapers any type, tee pieces single branch 'Y' junction, double branches, cross (all sockets or spigot and socket) collars, caps and pugs.connecting pieces one end flanged and othersocket of spigot and bell mouth pieces one end flanged other end tapering as bell mouth.

M&L for cement concrete 1:3:6 type C1 using 20 mm grade stone aggreegates for coping of poles including necessary formwork etc. all as specified and directed.

Cutting the existing CI/GI distribution main in position for taking out branch connection of upto 200mm bore pipe by inserting Tee/Collar etc.

Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:6), on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified.

M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:3) as on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified.

M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for Glazed ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.

All as per Sl item No 41 above but Size of Tile exc 0.06 Sqm but n exc 0.11 Sqm complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F for powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete as specified and as directed. Note:- Window shall be fixed as per three track frame TD drawings.

S&F for powder coated aluminium ventilator shutters with frame not less than 0.60Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

S&F for PVC door frames of sizes 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and as directed.

S & F factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed.

M&L for PCC (1:5:10) type E2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection including making joint at every 3mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F for 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S&F for 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm size aluminium anodized handle complete all as specified and as directed.

S&F in repairs PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed.

S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete as fixed complete all as specified.

S&F in repairs 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed..

S&F in repairs CP fancy type stop valves ,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and as directed.

Dismantling of water tanks (RCC hume Pipe/PVC) including disconnecting all connections etc. complete for following capacity of tanks :- 1000 ltrs

S&F for new rotational moulded polythylene water storage tank (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing brass ball valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks 1000 ltrs

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

S&F 15mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 25mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F in repairs 20mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repairs 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F PVC (SWR) bend any radius 110mm complete all as specified and directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work.

M & L for RCC (nominal mix) Type B1 1:2:4 ( Using 20 mm graded aggregate) in chajjas.

Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat rough finished surfaces of concrete

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item No. 75 above but 6mm to 8mm dia.

Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

S&F in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe etc complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and as directed.

M&L for precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggreates) set in CM (1:4) as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly) all as specified and directed.

M&L for Cement concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass-concrete

M&L for preparation of New or previously untreated steel or iron surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in loose / soft soil all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and m

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering

M & L for Hardcore of broken stone or boulders of gauge n exc. 63 mm,deposited,spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

S&F mild steel work (Tubular/ Hollow Section) as in Purline, rafter , Trusses, Post and wind ties as in roof including , flat iron fillets for securing wire mesh etc including all necessary welding, drilling bolting or riverting, etc, and similar work and gate conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

M & L for Cement concrete Type B2 1:2:4 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete.

M&L for 75mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone aggregate) in plinth protection/floors finished fair all as specified.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth ( without using extra cement ) complete all as specified and as directed.

M&L for two coats of cement base paint over chalk whitening newly plastered surfaces of walls including preparation of surfaces all as specified.

M&L for Plain Cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in Coping all as specified

M&L for applying 100 mm thick PCC 1:2:4 type B1 ( using 20mm graded stone agg) as in floors and finishing of cement concrete with out using extra cement concrete surface even and smooth all as specified and directed by Engr-in-charge.

Finishing surface of concrete roads, pavements by brooming all as specified.

Note: Amount of sch of credit of Rs.1,98,038.00/-will be deducted from total amount of BOQ.

Vishal Constructions

M/S MANISH CONSTRUCTION CO

Kaushalya Buildcon

Vinod Enterprises