Repair work in BRC building Primary School Sekhuikalan campus

Dismantling brick work or stone work in lime or cement mortar including stacking or dismantled material disposal of as directed by the engineer-in -charge with in a distance of 60 meters SI NO (692)

Dismantling doors or windows leavesexcluding chaukhat including stacking ofdismantled materials as directed byEngineer-in-charge with in a distance of 60mt. (200 feet)SI NO (703)

Dismantling existing plaster includingdisposal of refuse as directed by Engineerin-charge with in a distance of 60 mt. (200feet)SI NO (706)

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces cpwd 10.5.1

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. ( CPWD 10.1)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.1.1

40 mm thick C.C. flooring in 1:2:4: cement coarse sand & 12 mm gauge stone grit laid over floatjng coat of neat cement including fixing of glass strips (but execluding cost of glass strips)SI dsr 11.30.1

supply and fixing murga jali 1/2 and 24 gauge on roof etc item 3 page 40

12 mm Thick Plastering in 1:4 Cement and coarse sand morter on rough surface I/C all complete as per dsr13.4.1

S/F of 100mm dia pvc pipe

Providing & applying white cement based putty of average thickness 1.0 mm of approved brand & manufacture , overe the plastered wall surface to prepared the surface even and smooth complete CPWD 13.8

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)cpwd 13.47.1

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). DSR 11.47.2

Painting over M.S.work with approved paint I/C all complete as per si no 645&646

Fixing of door /windows Chaukhat I/c all complete of work.

S/F OF 5MM THICK GLASS PANS ETC COMPLETE WORK SI NO 812 (!!!)

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. DSR 17.18

P/F wash basin with ci/ms brackets 15mm cp brass piller trap ,32mm brass waste of standerds pattern size 550*400mm with single 15mm brass piller taps CPWD 17.7.3

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /(11.48.1 Size of Tile 500x500 mm) grouting and finishing complete as per direction of Engineer-in-charge.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws cpwd 9.20.2)

Please Enable Macros to View BoQ information