REPAIRS TO STREET LIGHT, PARIMETER LIGHTS FLOOD LIGHTS TIMER SWITCHES AVIATION LIGHTS AND CONNECTED WORKS AT AFS UTARLAI

Amount

M&L for disconnecting and taking down old U/S street light fittings of any type/rating from pole or wall, dismantling the same for necessary repair or replacment of U/S spares parts and refixing the same after necessary repair connecting and testing complete all as specified and directed by Engineer-in-Charge. Notes:- (a) Spares/accessories required for repair/replacement shall be measured and paid sepratley as supply only under respective items of BoQ. (b) T&P required for repair/ maintenance such as ladder, vehicle, manpower etc, shall be included in the quoted rate of this item.

Supply only Surge protection device compatible with industrial & outdoor LED fixtures 70 watt to 200 watt complete all as specified and directed by Engineer-in-Charge.

Supply only LED drivers compatible with industrial & outdoor LED fixtures 70 watt to 200 Watt of IS 15885 (Part 2/ Sec 13) as per existing make

Suitable for 70 Watt LED fitting

Suitable for 90 Watt LED fitting

Suitable for 120 Watt LED fitting

Suitable for 150 Watt LED fitting

Supply and fixing in replacement of GI pipe bracket "light grade" of 40mm bore ISI marked duly bent to shape with an angle including clamps, nuts, bolts, washers etc compltete and dismantling of existing old u/s brackets of all as specified and directed by Engineer-in-Charge. (Note: - The total length of the bracket shall be 1.5m)

M&L for disconnecting jumpers/electric connection of street light fittings from OH LT line or junction box removing the carbon and reconnecting the same complete all as per requirement of site.

Supply and fixing of 1100 volts grade "heavy duty" cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable conductor of following sizes including taking down old U/S cable :-

2.5 sqmm 2 core

4 sqmm 2 core

S & F in replacement of HDPE junction box of size 32 cm x 23 cm with cable glands, connector 3 P+1 N on insulators and necessary mounting arrangement ,MCB SP upto cap of 2 Amp and fixing on poles with MS Clamps and connecting with existing cable all as directed.

M&L for repair and replacment of U/S time switch accessories/ spares including reconnecting and testing complete. Note : - Spares/accessories required for replacement shall be measured and paid sepratley under respective items of BoQ.

Supply only time switch analog type, single phase, 230 Volts of rating 20 Amps,

Supply only Nature Switch-02 (sensor) of illuminance level for switching ON is ≤ 30 Lux and for Switching OFF ≥ 10 Lux along with part night operation facility of 4-12 hrs.make- healer enterprises or equivalent as per site requirement

Supply only contactor 3 pole, 415 volts including suitable size of lugs make- siemens /L&T/BCH or equivalent of following ratings-

Supply only MCB TPN 415 Volts, 50 Hz AC supply system make- siemens /L&T/BCH or equivalent of following ratings-

Supply and fixing in replacement of 70 watt LED flood light, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light, suitable for highlighting architectural facade and general purpose lighting. Make: Havells/ Philips/Wipro/ Crompton

Supply and fixing in replacement of LED street light energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high power LED as lighting source with IP65 protection as directed by Engineer-in-Charge. Make: Havells/ Philips/ Wipro/ Crompton . Rating and capacity are as below

Supply install and testing in replacement of out door wheather proof bus bar chamber of size 80 cm x 30 cm x 25 cm made out of 18 SWG MS sheet having one side openable hinged door shuter with looking arangement mounted on 40x40x6mm anlge iron frame with legs welded and 04 nos copper bus bar of 200 Amp rating provn of one MCCB TPN 100 Amp 16 KA for controlling Electric supply complete erracted on ground with necessary PCC 1:3:6 type C2 foundation complete bus bar chamber painted with two coats of approved enamel paints over one coat of redoxide primer including making cable connection with necessary gland , lugs/thimbles all as specified. NOTE: Cost of dismantling/ taking down old unserviceable bus bar chamber shall be included in the quotedd rate of this item.

Labour for removing and taking out existing underground LT Cable from trenches including stone patties/sand or pole or underground in pipe duct carefully cleaning of the same for relaying incase of serviceable cable complete all as specified.

50 Sqmm 3.5 core

35 Sqmm 3.5/4 core

25 Sqmm 3.5/ 4 core

10 Sqmm 3.5/ 4 core

16 Sqmm 2 core

10 Sqmm 2 core

Relaying, Jointing and testing only under ground armoured cable LT XLPE insulated cable 1100 Volts PVC bedded aluminium conductor cable received from Item No. 16 here in above complete all as directed by Engineer-in-Charge.

50 Sqmm 3.5 core

35 Sqmm 3.5/4 core

25 Sqmm 3.5/ 4 core

10 Sqmm 3.5/ 4 core

16 Sqmm 2 core

10 Sqmm 2 core

Supply & Laying, Jointing and testing underground armoured cable LT XLPE insulated cable 1100 Volts PVC bedded galvanised steel strip or wire armoured electric LT UG cable heavy duty with multi stranded aluminium conductor laid in trenches / walls/ ducts passing through pipe cable of following size complete all as specified:-

50 Sqmm 3.5 core

35 Sqmm 3.5 core

25 Sqmm 4 core

10 Sqmm 4 core

16 Sqmm 2 core

10 Sqmm 2 core

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 mtr depth for laying of cable and getting out in any type of soil complete all as specified.

Excavation in trenches exc 1.5m in depth and not exc 3.00m in depth for laying of cable and getting out in any type of soil complete all as specified.

Removing of excavated surplus soil not exc 50 m and deposited where directed at a level not exc 1.5 m above the starting point.

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm thick in soil complete all as specified.

M & L for sand cushioning to all around the cable protection of natural Tibba sand all as directed. (Note : Punning thickness will be measured and paid for payment purpose.)

S & L stone patti quarry faced Jodhpur type 4 to 5 cm thick and 25 to 30 cm wide putting on cable abutting to each other for cable protection all as directed.

Labour only for laying only serviceable stone patti obtained from item No 23 taken out old stone patti for protection of cable all as directed.

M & L in replacement of pre-stressed concrete pole 9 Mtr long 102 mm X 172 mm at top and 102 X 279 mm at bottom class 10, including painting of PCC pole upto 150 cm height from ground level with two coats of synthetic enamel paint in yellow and black colour code in 30 cm width for LT /HT pole and marking the pole number in white colour at top most strip in appropriate font size by using of stencil complete all as directed by Engr-in-Charge. Note : (i) Excavation in PCC will be measured and paid separately. (ii) Dismanling of PCC foundation & PCC for pedestal is included in the quoted rate of this item.

M & L PCC 1:4:8 type C2 using 40 mm graded stone aggregate for foundation of pole. Complete all as directed by Engineer-in-Charge.

M & L PCC 1:3:6 type C1 using 20 mm graded stone aggregate for pedestal of pole. Complete all as directed by Engineer-in-Charge.

Material and Labour for trimming/cutting of tree branches touching HT/LT overhead lines wide growth around poles and making clear span of 2 mtr all around OH line with pole and plants all as directed by Engineer-in-Charge.

S & F in replacement following MCB single pole, 230 Volt 10 KA,

0.5 to 2 Amp,

Supply and laying in replacement of galvanised steel tube 40mm bore "light grade" for protection of cable complete all as directed by Engineer-in-Charge.

Supply and fixing in replacement of LT cable route indicator cast iron of suitable size mounted on 40 x 40 x 3 mm angle iron with height of 1.5 metre along with LT cable trench including planting in ground with PCC 1:3:6 type C-I using 20 mm graded stone aggregate as per existing size complete all as specified and directed.by Engr-in-Charge.

Labour for drilling hole under road for laying of U/G cable through with and including HDPE pipe 80mm dia complete all as specified and directed at site.

Surface Dressing / Cleaning of Surrounding Area of two Pole / Four Pole / Sub Stn structure including removing of bushes, small trees plants etc complete all as directed by Engr-in-Charge

Material and labour in replacement danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size complete all as directed by Engr-in-Charge

Single-Phase load of 5kW (Swadeep-02EC5kW1P) with Contactor, Incoming MCB & Outgoing MCB rating of 40-63 Amps & main load Circuit Wiring of min. 10 sq.mm. Make of Nature Switch: Kakatiya Energy Systems/ BAJAJ/ Healer, Contactors: BCH/ L&T/ Schneider, MCBs: HAGER/Schneider/L&T (Exora/AU series) /C&S, Enclosure & Circuit Sheet: Sintex or equivalent, Circuit Wiring: Polycab/Finolex or equivalent. Contactor should Conform to IEC-60947-4-1 / IS-13947-4-1 and MCBs should Conform to IEC-60898 / IS-8828

Three-Phase load of 12kW (Swadeep-02EC12kW3P) with Contactor, Incoming MCB & Outgoing MCB rating of 40-63 Amps & main load Circuit Wiring of min. 10 sq.mm. Make of Nature Switch: Kakatiya Energy Systems/ BAJAJ/ Healer, Contactors: BCH/ L&T/ Schneider, MCBs: HAGER/Schneider/L&T (Exora/AU series) /C&S, Enclosure & Circuit Sheet: Sintex or equivalent, Circuit Wiring: Polycab/Finolex or equivalent. Contactor should Conform to IEC-60947-4-1 / IS-13947-4-1 and MCBs should Conform to IEC-60898 / IS-8828

Supply and Fixing in replacement of 9 watt pathway LED bollard light with opel arylic diffuser and IP 65 protection including cable connection to UG cable using 1.5 sqmm PVC insulated PVC sheathed 1100 V grade twin core copper conductor wire all as directed by Engr-in-Charge all as per Bajaj ordering product code No. 111284, Model;- Tulip, Cat No. BGBOM 650 9W LED or equivalent in Havells/Philips/wipro /crompton Greaves/Surya

Supply and fixing in replacement of LED aviation obstruction light with suitable wattage rating as per site comprising of aluminium housing with polycarbonate enclosure all as per Bajaj product code 110731 luminaire type BGAV302 LED or equivalent Philips/Wipro/Havells/surya including all necessary fitting accessories and LED lamps complete all as directed.

S&F in replacement of post top lantern light "MAPLE" decorative post top for 360 degree indirect light IP 65 protection resistant to impact and corrosion . Glare-free and better uniformity. 40 watt LED 230 V 50 Hz including necessry fitting accessories complete all as per Crompton cat No. LPTO-40-CDl or equivalent Philips/Wipro/Havells/surya

Supply and fixing in replacement of medium grade galvanised steel tube 50mm bore for pathway lights duly painted with two coat of aluminium paint over a coat of zinc oxide primer size of pipe 0.70 mtr including grouting the same on path/road side complete all as directed by Engineer-in-Charge. Note- Earth work and PCC required at site is deemed to be included in quated rates

Supply and fixing in replacement of polycarbonated globe suitable for 15 W LED bulb/ CFL retrofit including holder including base plate suitable for mounting of globe complete with electric connection and required accessories all as directed by Engineer-in-Charge.

M & L for lowering of high mast lantern carriage for disconnecting and taking down U/S high mast light fittings of any type/rating dismantling the same for necessary repair or replacment of U/S spares and refixing, connecting, testing including raising high mast lantern carriage to its original position complete all as required at site and directed by Engineer-in-Charge. Notes:- (a) Spares/accessories required for replacement shall be measured and paid sepratley under respective items of BoQ. (b) T&P required for lowering/raising such as ladder, vehicle, menpower etc, shall be included in the quoted rate of this item.

M&L for repairing of highmast for electrical operation of raising and lowering mechanism of lantern carriage with its supporting stand complete as required at site and directed by Engr-in Charge including following:- (a) Fixing, connecting and testing of existing stainless steel wire rope of 6mm dia (7/19 construction) with double drum winch. (b) Repair / servicing of integral power tool, three phase, high powered, reversible with mechanical tripping facility. (c) Checking serviceability of trailing cable, flexible Copper 5 core 2.5 Sqmm through shaft and reconnecting the same or new cable as per requirement ( Rate for new cable is not included in this item). (d) Repair of manual lowering hoisting chain link mechanism. Notes:- (a) Spares/accessories required for replacement shall be measured and paid sepratley under respective items of BoQ. (b) T&P required for repair/ mantenance such as ladder, vehicle, manpower, welding cutting arrangement etc, shall be included in the quoted rate of this item.

Dismantling, opening, rewinding and refixing 3.0 HP motor, three phase, 415 V, 50 Hz motors with super enameled copper wire of existing gauge and existing class insulation including superior quality varnishing, heating / drying coils, making connections from coil to terminal box, spray painting with two coats of synthetic enamel paint, necessary mechinical works for shaft / bearing housing, renewal of DE and NDE bearings, transportation from installation to workshop & back, connecting, testing and commissioning at site for satisfactorily operation as required.

Supply only starter in replacement suitable for 3.0 HP motor, three phase, 415 V , AC supply with forward/ reverse switch for High mast raising and lowering of lantern carriage with its supporting stand.

Supply only PVC insulated and over all PVC sheathed, stranded copper conductor wire 4.0 sqmm x 5 core ISI marked.

M&L for painting of existing PCC pole upto 150 cm height from ground level with two coats of synthetic enamel paint in yellow and black colour code in 30 cm width for LT /HT pole and marking the pole number in white colour at top most strip in appropriate font size by using of stencil complete all as directed by Engr-in-Charge.

National Rewinding Works

M/S PRASHANT BENIWAL

M/s godara infratech and power industries

M.D. CONSTRUCTION CO.