SPL REPAIR OF BLDG NO. T-17 ( 08 X QTRS) OF MD ACCN (CIV DEF EMP) AT SITE-III OF THE SIKH LI REGT CENTRE FATEHGARH CANTT

Amount

Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc upto 6.00 mtr height complete all as specified and directed.

Taking up or down 15 mm steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections complete all as specified and directed.

Refixing old steel tubing 15 mm and connection in new or old position (walls ceiling floors etc. including cutting, cleaning, threading, fixing complete all as specified and directed.

Refixing old steel tubing 20 mm and connection in new or old position (walls ceiling floors etc. including cutting, cleaning, threading, fixing as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including taking down of backing plaster to brick / concrete wall surface), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition cement conc. of any description and in position not otherwise specifically provided for complete all as specified and directed.

Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Dismantling wrought iron / Mild Steel work of any description not otherwise provided for complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc Including brick work of jambs and Cill in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc Including brick work of jambs and Cill in CM 1:4 complete all as specified and directed.

Dismantling of cast iron / PVC / AC / SGSW pipes alongwith fittings and accessories upto 100 mm dia jointed in cement mortar and taking out of walls, floors or trenches, if required complete all as specified and directed.

Dismantling of water tanks capacity exc 250 ltrs and n.exc 500 ltrs and removing to store complete all as specified and directed.

M & L Non skid coloured ceramic joint less tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cement (1:6) complete all as specified and directed.

M & L Non skid coloured ceramic joint less tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cement (1:6) complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM (1:4) on brick work concrete surface on wall and finished the even and fair to receive tiles complete all as specified and directed.

M&L 20-25 mm thick machine cut kota stone as in flooring laid over 15mm th screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

M & L for 20-25 mm thick machine cut kota stone as in riser of steps, treads / staircase, in full length in single peice without joint, skirting with groove cutting in double line of stair width / skirting laid cement screed of 15mm th of CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade including necessary grinding, rubbing and polishing (mirror finish) and complete all as specified and directed.

M&L 20 mm th Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15 mm th screed in CM 1:6 complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection finish without using extra cement complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.

All as per item No.23 above but except bricks complete all as specified and directed.

M & L for 15mm thick rendering in cement mortar 1:6 on brick masonary wall surfaces on fair faces of brick masonary finished even and fair without using extra cement, upto 6.00 mtr height complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M & L for 15mm thick rendering in cement mortar 1:4 on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement upto 6.00 mtr height complete all as specified and directed.

M & L for rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coat of oil bond distemper white or any tint over a coat of chalk whitening complete over prepared surface of 1mm thick wall care putty complete as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer and 1mm thick weather coat putty complete all as specified and as directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and directed.

M & L for old surfaces complete removal of existing treatment surface and making surface smooth and applying two coats of OBD over prepared surface of 1mm thick wall care putty complete as specified and directed

M & L for complete removal of existing treatment surface and preparation of old plastered surfaces and making surface smooth and applying two coats of cement base paint over 1mm thick weather coat putty complete all as specified and directed.

M & L for preparation of old plastered surfaces of ceiling by rubbing down and making surface smooth and applying two coats of white wash complete all as specified and directed.

Removing existing water proofing treatment of any type all as directed by Engineer-in-charge and disposing off out side Defence Land complete all as specified and directed.

M&L for cement concrete 1:3:6 type C1 (20mm graded stone aggregate) as in RCC roof surface with mixing of water proofing compound 3% by the weight cement to horizontal or vertical surfaces finished cement concrete surface even and smooth using extra cement including necessary form work complete all as specified and directed. Note:- (Water proofing compound will be measured separately)

M & L for preparation of newly plastered surfaces of roof including cleaning the surface by using wire brush/pressure hose and applying high performance polyurethane liquid membrane roof casting cold in two coats @ 1.5 Kg/Sqm with spray/brush an elogation of 300% to 700% and tensile strength not less than 3 N/Sqm as per ASTM D412 and ASTM D2370, crack bridging ability of 3.5mm as per ASTM C 1305, shore a hardness of not less than 60 as ASTMD 2240. The item includes epoxy prime applied @ 0.15 Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufacturer's instruction and sound engineering practice complete all as specified and directed. Note - work shall be executed by authorized applicator of manufacture as per manufacturer's instructions and roof height upto double storey building.

Supply only WPC complete all as specified and directed.

M&L for water proofing treatment to floor and vertical surface of sunken portion complete all as specified and directed with including following :- (a) After demolition of floor and cement concrete remove all loose particles alongwith existing water proofing treatment (any no of layers) with wire brushes a d cleaning the surface with water. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with acrylic water proofing compound. (c) 15mm thick (average thickness) plaster in cement mortar (1:3) mixed with acrylic water proofing compound on sunken surface and wall. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe. (d) Brushing cement slurry with 1.2 kg per square metre duly blended with acrylic water proofing compound. (e) Curring the sunken portion with water minium for 48 hours by ponding.

M&L for Cement concrete Type E2 1:5:10 ( 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Dismantling boarding as in kitchen cupboard, drawers, cupboard incl chowkhats etc. fixed in any position complete all as specified and directed.

S&F factory made Steel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:2:4) type B-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Hold Fast, 150mm long of 12mm square bar made to shape – 04 Nos per window (b) Handles of Z Sec 100mm long (c) Stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges – 01 No per leaf (e) MS Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per TD. Note : Glass, and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

S&F factory made Steel Window 1.25mm thick Box Type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf without sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm welded to FI frame and 100mm spacing of guard bar complete all as specified and shown on drawings. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

Ditto all as per item No.43 above here-in-before but as in ventilator fixed type (partly glazed and gauzed) complete all as specified & directed

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type prelaminated both side flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of 100mm with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note :- Stainless steel butt hinges shall be include in this item for quoted rate.

S & F factory made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Prelaminated both side wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cum an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of 100mm size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company. Note :- Stainless steel butt hinges & stainless steel wiremesh shall be include in this item for quoted rate.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated shutter for kitchen cabinet, cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 6mm thick pre laminated board for kitchen cabinet, cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 100mm x 65 mm Single Rebated ,made from wpc material comparing of virign PVC polymer of K value 58-60 (suspension grade ) calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk) minimum compressive strength of 58 N/mm2, modulus of elasticity 900N / Sqmm and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasteners / hold fast of required dia and length, colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed.

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 125mm x 65 mm double Rebated ,made from wpc material comparing of virign PVC polymer of K value 58-60 (suspension grade ) calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk) minimum compressive strength of 58 N/mm2, modulus of elasticity 900N / Sqmm and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasteners / hold fast of required dia and length, colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed.

S & F for framed work such as grills, gratings, etc, with ends of bars shouldered and or riveted or forged into spikers mild steel wk as angle, channel, guard bars, grills or forged into spikes, framed balusters, cooler stand (fixing upto 6 mtr height), walkway railing and other work including welding, FE-290 grade E-165 complete all as specfied and directed.

S & F sheet glass ordinary quality 3 mm thick and glazing with oil putty or fixed with bead / glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

S & F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, wooden beads to steel windows/wooden doors complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section of 200mm size etc complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 100mm etc complete all as specified and directed.

S&F 100mm hasp and staple, aluminium anodised, incl mils steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 150mm etc complete all as specified and directed.

S&F 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F floor door stopper aluminium alloy body and tongue, anodised, with hard drawn steel spring with rubber etc overall length of cover plate 140mm complete all as specified and as directed.

S & F ball catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc complete all as specified and as directed

S & F continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when opened) 40 mm etc complete all as specified and as direced.

S & F in repair mild steel helical door spring 300 mm longe ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S & F in repairs stainless steel decorative curtain rod of 25 mm bore with 1mm thick including brakets 02 nos finalie 02 nos) etc complete all as specified and as directed.

S & F for stainless steel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed.

S & F 500 litre rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S & F 20 mm PTMT valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed

S & F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed

S & F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and directed.

S & F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed

S & F in repair fancy type 125mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed.

S & F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia pipe complete all as specified and as directed.

S & F in repair stop valves / angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed

S & F in repair tubular towel rail 20 mm dia D type brass chrormium plated 600 mm long between flanges complete all as specified and as directed.

S & F in repair PVC connection of 15mm size 450 mm length including brass nuts complete all as specified and as directed

S & F in rep fancy type brass chromium plated soap dish of 160 x 160 x 90 mm complete all as specified and directed.

S & F fancy type glass corner 300 mm radius of 6 to 8 mm thick toughened glass with CP railing fixed with fancy type screws complete all as specified and directed. Make Parryware Cat No T6010A1, Cera Cat No F5005102

S & F in repairs vitreous china squatting pan orissa pattern long pan size 580 mm x 440 mm white with spun pipe ‘P’ or ‘S’ trap including lead joint and CI spun branch piece , front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed.

S & F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls including fixing with clamps complete all as specified and directed.

S&F 75 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls including fixing with clamps complete all as specified and directed.

S&F 110mm bore PVC (SWR) P trap,including provision of PVC garting 110mm Size complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor 110 mm bore pipe with clamps complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor 75 mm bore pipe with clamps complete all as specified and directed.

PVC (SWR) bends any radius for 110 mm bore pipe complete all as specified and directed.

PVC (SWR) bends any radius for 75 mm bore pipe complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal with acess door opening for cleaning complete all as specified and directed.

S&F 110mm bore PVC (SWR) Cowl for vent complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent incl 100 mm dia CP NT cover complete cement complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.

PVC (SWR)110mm branch piece, single (single Y) equal or unequal complete all as specified and directed.

PVC (SWR) 75mm branch piece, single (single Y) equal or unequal complete all as specified and directed.

PVC (SWR) 110mm junction single, (Single T) equal or unequal complete all as specified and directed.

PVC (SWR) 75 mm junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm PVC (SWR) couplers complete all as specified and directed.

S&F 75mm PVC (SWR) couplers complete all as specified and directed.

S&F in repair CP grating doom 100/125mm dia with or without waste hole etc complete all as specified and directed.

S & F in repair stainless steel sink with drainage board 1.00mm thick for kitchen with plug / waste pipe washers including cantiliver bracket or, connecting unions etc over all size 915 x 460 mm with bowel size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair utencil plate rack 1 mm th of size 60 cm x 60 cm x 25 cm, of pattern as approved by engineer-in-charge, fixed to wall by means of four nos rawal plugs, complete in all respect complete all as specified and directed.

S&F in repairs sink mixer with swan neck 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S&F in repairs wall mixer with L-band(provision of overhead shower) 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S & F MS joist channel , angle or Tee section MS tubes, flats square bars etc fixed indepently or framed or without connecting plates, (cut to ordinary lengths i.e. within 20mm of the length indicated) trusses etc any type framing including purlins and rafters etc complete all as specified and directed.(Fe 410-W Gde E-250 Quality A) complete all as specified and directed.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any complete all as specified and directed.

S&F for Expanded metal in available size weight not exc. 4.00 kg per Sqm complete all as specified and directed.

M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint etc complete all as specified and as directed.

Demolition of cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed

M & L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall, landing, balconies, canopies, deck slabs and in shelves and like in repair to Chajjas, Claddings, soffits etc including bonding agent, complete all as specified and directed. Note:- Reinforcement to be measured & paid under respective items.

M & L for form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed.

M & L mild steel TMT bars 6 to 8mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified and directed.

M & L for providing pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab and man hole covers etc set CM (1:6) complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2( using 40mm graded stone aggregate) as in flooring and mass concrete to complete all as specified and directed

M & L chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick (as approved AGE(I) ) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. including 15 mm thick cement screed bed in CM 1:6 etc complete all as specified and as directed.

M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface complete all as specified and directed.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture SIKA LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat complete all as specified and directed.

Dismantling of (Plain, corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.

S & F Pre - Painted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by AGE(I) having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified.

Taking down Aluminium/copper sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed

Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green etc colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLS PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box (Min 60mm deep, suitable size) concealed in wall, including 3mm thick bakelite plastic laminated sheet top cover for sunken boxes flush to surface for mounting of switches / socket / regulator etc, including provn of 1.5 Sqmm single core FRLS PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. Note- Switch, socket, Regulator & paid separately.

All as per item 123 here in before but for One 5 pin 5 Amp socket point with switch on an independent board with 2.5 Sqmm (FRLS) copper conductor cable complete all as specified and directed.

All as per item 123 here in before but for One 5 pin 5 Amp socket point with switch on same board complete all as specified and directed.

All as per item 123 here in before but for one 16 Amp 6 Pin switch socket combination independent with 4.0 Sqmm (FRLS) unsheathed copper conductor single core multistranded complete all as specified and directed.

S&F Switch Piano flush type 5 Amp single pole one way complete all as specified and directed.

S&F Socket 2 in 1, 3 Pin 5/6 Amp complete all as specified and directed.

S&F Switch socket combination 2 in 1 flush type 16 Amp 5 Pin complete all as specified and directed.

Supply and fixing Bell push AC 230 volts complete all as specified and directed.

Supply and fixing Call bell ding dong AC 230 volts complete all as specified and directed.

S&F LED decorative wall light fixture made up of Polycarbonate, suitable for 09W TU retrofit B-22 including LED bulb 09 Watt of colour temp 3000K & luminaire lumen >1000 lm complete all as specified and directed.

Supply and fix electronic fan regulator 5 stepped type complete all as specified and directed

S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.

M&L for sub main wiring with two single core 6 Sqmm (FRLS) copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm (FRLS) insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. (Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm (FRLS) copper conductor shall be measured as one unit length.)

S&F in replacement of VTPN DB 12 way suitable for Mounting MCCB as Incomer of rating 100 Amp with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified and directed.

S&F of MCCB 100 Amp, 16KA, 4 Pole including complete electrical connection by appropriate size of aluminium lugs complete all as specified and directed

S&F in replacement of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection as required complete all as specified and directed.

S&F of MCB SPN 63 Amp 240 volt 'C' curve 10 KA complete all as specifed and directed.

S&F of MCB SP 10 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.

Supply and fixing LED lights fitting 4 Ft, 20W, 220V, AC, batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC batten type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S & F building security LED Light 30 Watt sensor based made up pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-65 protection and impact resistance of IK 07 for building secuity purpose with bracket size made of GI pipe medicum grade 25 mm dia 1.2 mtr long bend to shape as required and fixing with two nos MS Clamp of size 25x6 mm for fixing of builiding security light fittings completed all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete incl dismentling all as specified and directed.

S & F in of 25 mm bore GI Tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection with suitable size of MS Clapms and nut and bolts/washer complete incl dismentling all as specified and directed.

M & L of Sand cushioning for cables complete all as specified and directed .

M & L of old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in any type of soil complete all as specified and directed.

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any type of soil complete all as specified and directed

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed

S & F heavy duty exhaust fan (plastic) complete with louvers shutter, 230 V, 50 Hz, 1200 RPM, Copper winding of sweep 250 mm complete all as specified and directed.

S&F in repair of MCB distribution board SPN 240 Volt 2 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified and directed.

Taking down and Up of ceiling fan including accessories such as down rod (upto 600mm length), canopy and fan blade and refixing the same with flexible copper wire of size 23/0.0076 Sqmm upto 0.40 mtr with fan connector to ceiling rose complete all as specified and directed.

Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing wire of size 4 mm dia by means of GI bolts/nuts/washers and protected by 15 mm bore GI light grade pipe upto test point or upto main switch board, HT/LT equipments, fixing with 02 Nos nuts and bolts and protection pipe fixed with and including flat iron clamps, bolts, nuts and washers. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete including dismentaling old earthing all as specified and as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing wire upto test point or upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.

GEESR INFRA BUILDERS PVT LTD (BID ID -3359545)

M/S SRI JAGDAMBE TRADERS (BID ID -3368274)

M/S SHRI RAM CONSTRUCTION AND SUPPLIER (BID ID -3360716)

kpenterprises (BID ID -3368387)