Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.1 LAccepted-AOC | L1 | Accepted-AOC DUE TO LOWEST L1 | |
| 2 | L2₹27.8 L+₹1.6 L (6.01%)Rejected-Finance 16 BAITHAKKHANA ROAD 16 BAITHAKKHANA ROAD SEALDAH BAITHAKKHANA ROAD SEALDAH BAITHAKKHANA ROAD SEALDAH KOLKATA | L2 | Rejected-Finance DUE TO HIGHER RATE | |
| 3 | L3₹27.9 L+₹1.7 L (6.53%)Rejected-Finance NAU PUKHRI ROAD MILLAN PALLY BYE LANE 2 NEAR GOYAL PALACE PO DISTT TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L3 | Rejected-Finance DUE TO HIGHER RATE | |
| 4 | L4₹28.8 L+₹2.6 L (9.84%)Rejected-Finance COLLEGE ROAD CHABUA PO CHABUA DIST DIBRUGARH ASSAM 786184 | DIBRUGARH | ASSAM | 786184 | L4 | Rejected-Finance DUE TO HIGHER RATE |
Tender Value
₹26 L
EMD Value
₹52,000
Closing Date
17 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
SPECIAL REPAIR TO BLDG NO T-8/10A OF 402 FD HOSP AND CERTAIN MINOR WORK AT LEKHAPANI MIL STN
2022_MES_538004_2
8672/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
4 documents required · 4 mandatory
₹500
GE LEKHAPANI
₹52,000
Yes
14 Oct 2022
25 Aug 2022
24 Sept 2022
25 Aug 2022
17 Sept 2022
3 Sept 2022
Amount
Excavating in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation etc or for shafts, wells, casspits, manholes, pierholes etc n. exc 10 sqm on plan & n. exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.
Excavating over area in soft/loose soil, n exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.
All as per item No.2 above but exc 1.5m deep but n. exc 3 mtrs and getting out complete all as specified and directed complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Dismantling of Asbestos cement corrugated. semi-corrugated sheets in roof covering complete all as specified and directed.
Dismantling boarding, any description fixed in any position with nails complete all as specified and directed.
Dismantling wall and celling board (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets any thickness including cover fillets complete all as specified and directed.
Dismantiling timber 40 Sq.cm and over in section (unframed work), in any position complete all as specified and directed.
Dismantling timber fillets, rails, posts, rafters, purlins, etc in unframed work under 40 Sqcm in section in any position complete all as specified and directed.
Dismantling of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified and directed.
M&L Brick work with sub class old size 'B' bricks, straight or curved on plan, exc 6m mean radius, built in cement mortar 1:4 as in half brick complete all as specified and directed.
M&L Brick work with sub class old size 'B' bricks, straight or curved on plan, exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
All as per item No 13 above but except bricks.
M&L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:6 complete all as specified and directed.
M&L for loose filling with broken brick aggregates of gauge 80 to 150mm in soakage pit, soak well etc complete all as specified and directed
M&L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.
M&L Providing RCC M-25 (Design Mix), (using 20mm graded stone aggregate) as in foundations, including rafts,footings,foundation beams,plinth beams; comlpete all as specified and directed.
M&L Providing RCC M-25 (Design Mix), (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L Providing RCC M-25 (Design Mix), (using 20mm graded stone aggregate) as in pre cast cover slab for manholes, etc set in cement mortar (1:4) with plain fair faces incl chamfered, weathering, throating etc incl necessary use and waste of form work complete all as specified and directed.
M&L Providing RCC M-25 (Design Mix), (using 20mm graded stone aggregate) as in beams, cantilevers, bressumers,lintel bands any span etc.complete all as specified and directed.
M & L PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in surface channels and drains incl necessary formwork complete all as specified and directed.
Use and waste of formwork to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
Use and waste ofFormwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces of concrete complete all as specified and as directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, landings and similar work not exc 200mm thick (Horixontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5sqm each and making good to disturbed surfaces and removing from site of work complete all as specified and as directed by the Engineer-in-Charge.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5sqm but not exceeding 4.0sqm each and making good to disturbed surfaces and removing unserviceable materials from site of work complete all as specified and directed by the Engineer-in-Charge.
S&F Pressed steel frames 1.2mm thick of size 125mm X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate with and including one shop coat of primer to outer face and coat of primer and rubber paint on back side of chowkat., complete all as specified & as directed
S&F Pressed steel frames 1.2mm thick of size 105mm X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate with and including one shop coat of primer to outer face and coat of primer and rubber paint on back side of chowkat., complete all as specified & as directed
M&LPCC (1:2:4) type BO (using12.5 mm graded stoneaggregate) as in filling under pressed steel frames complete all as specified and directed.
S&F Steel windows or ventilators, fixed type, with glazing bars with and including one shop coat of primer to outer face and coat of primer and rubber paint on back side of frame., complete all as specified and directed by Engr - In - Charge.
S & F for Aluminum powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (Section of 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and directed by Engr - In - Charge.
S & F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15 of appkjroved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed by Engr - In - Charge.
S&F steel windows double leaf shutter i.e wire gauged and glazed both with incl frames, side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars to glazed shutter and without glazing bars to wire gauzed shutter , dovetailed or welded complete 50x5mm flat 100mm long 2 No to each side all around to combine both shutter frames complete with and including one shop coat of primer to outer face and coat of primer and rubber paint on back side of frame., complete all as specified and directed.
S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,complete all as specified and directed by Engr - In - Charge.
S&F Aluminium powder coated door shutter single / double leaf, side hung type on floor door spring (to be paid sepratly) 44.45mm wide (two panels) fabricated having hanging and meeting style 85.00 mm X 44.45 mm X 1.8mm thick, top rail 83.50 mm X44.45 x 1.62 mm thick, middle rail 83mmx44.45mmx1.70mm thick and bottom rail 95.25mm X 44.45mm X 1.70 mm thick and including jointing cleats, aluminium anodised snap beading, screws, aluminium anodised fitting such as pair of 'D' type handle 250mm long (decorative type), tower bolts 150 mm long 1 Nos for each leaf, aluminium beading, PVC packing, locking arrangement with mort ice lock 6 lever, 1Nos floor door stopper, and necessary fitting & fixtures complete all as specified and directed by Engr - In - Charge.
S&F Heavy duty Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr - In - Charge.
S&F 35 mm thick second class hard wood glazed and skelton door shutters , open rebated and prepared to receive glass, guaze etc (without sash bars ) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. size of members of shutters as specified in SSR Part-1,section 8,clause 8.24 (a) complete fixed to frames all as specified and as directed.
S&F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & fixed to chowkats complete all as specified & directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F for 4 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S & F for 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F for Mild Steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S & F 150mm size Aluminium handles, cast type, anodised complete all as specified and directed.
S&F in repairs curtain rod 25 mm dia Chromium plated or PVC sheathed , with and including PVC decorative round finials on either end provide a visually balanced appearance including MS powder coated brackets fixed to wall with 30 mm screws and PVC rawl plug, anchors, and installation complete all as specified and directed.
S&F Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605mm x 605mm in true horizonatal level, hot dipped galvanised steel sections consisting of main “T” runner with suitably spaced joints to get required length and size 24mm x 38mm made from 0.30mm thick (Min) sheet spaced at 1200mm centre to centre and cross “T” of size 24mm x 28mm made of 0.30mm thick (Min) sheet, 1200mm long spaced between main “T” at 600mm centre to centre to form a grid of 1200mm x 600mm and secondary cross “T” of length 600mm and size 24mm x 28mm made of 0.30mm thick (Min) sheet to be interlocked at middle of the 1200mm x 600mm panel to form grids of 600mm x 600mm and wall angle of size 24mm x 24mm x 0.4mm. Main “T” runner to be suspended from ceiling /truss/purlis using 2 to 3mm GI wire, 1200mm x 600mm centre to centre all complete for all heights as per specifications and as directed by Engineer – in - Charge.
S&F 4mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation and acoustic purpose to be placed in the grid system , with provision of light fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detector etc. complete all as per manufacturer instructions and as directed by Engineer – in - Charge..
M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M & L for mild steel TMT bars 6 mm to 8 mm dia, in stirrups cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Complete all as specified and as directed.
Supply & Fixing mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 (Yst.-310) complete all as specified and directed.
S & F for steel work of in hollow rectangular or square tubular trusses incl special shaped washer etc complete using ERW or HRW welded conforming to IS - 4923 (Yst-310) complete all as specified and directed.
S & F MS plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.
S & F Framed work such as grills, gratings, etc with ends of bars shouldered and / or riveted, or forged into spikes, frames guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con-forming to Fe-290 Gde-E165complete all as specified and directed.
M&L for Pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L for Hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as directed.
Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided (reinforcement cut as required to facilitate demolition) for cement concrete reinforcement complete all as directed.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below and above ground level) for cement concrete (unreinforced) complete all as specified and directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for coloured non skid joint free ceramic tiles of 6 to 7mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for Glazed ceramic coloured tiles in vertical surface 300x450 x7 to 8 mm thick set and jointed in neat cement slurry and pointed with white and colour cement to match including rendering 10mm thick in CM 1:4 complete all as specified and directed.
M & L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite finish polishing complete over 20mm thick cement screed bed in CM (1:4) complete as specified and directed.
All as per Item No.63 above but in riser of steps skirting dado etc incl 15 to 18mm thick cement screed bed in CM (1:4) complete as specified and directed.
M & L for Granite (of any type) tiles 15 to 17mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigent to match the shade of granite stone including grinding and polishing complete over 20mm screed bed of CM (1:4)complete as specified and directed.
M&L 50 mm thick PCC (1:3:6) type C-1(using 20 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as specified and directed.
M&L for 10mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces including finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:4 in two layers on on other than fair faces of brick work or stone masonry including finishing even and smooth without using extra cement and shall be mixed with water proofing compound (WPC) complete all as specified and as directed. (WPC shall be measured and paid seprately as supply only.)
Supply only approved integral water proofing compound complete all as specified and directed.
M&L Preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M & L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer including 1 to 2mm thick wall care putty complete all as specified and directed.
M&L Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer with and including 1mm thick exterior wall care putty complete all as specified and directed.
M&L Prepairing of newly or previously untreated wood and wooden based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M & L Preparation of new steel or Iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.
Taking up or down steel water tubing and connections, including cleaning for refixing or removal from site, for bore of pipes 15mm dia complete all as specified and directed.
Taking up or down steel water tubing and connections, including cleaning for re-fixing or removal from site, for bore of pipes 20mm dia complete all as specified and directed.
S&F GI pipes15mm dia galvanised steel (GI) tubing, medium grade, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified & directed.
S&FGI pipe 20mm dia galvanised steel (GI) tubing, medium grade, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified & directed.
S&F 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S&F PVC (SWR) bends 75mm dia any radius all as specified and directed.
M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F PVC (SWR) vent cowl 75mm fore fixed with pipe complete all as specified and as directed.
S&F PVC (SWR) pipes 160mm dia single socketed, in any length with rubber ring joints, fixed to walls as in repair complete all as specified and as directed.
M&L PCC ( 1:3:6 ), type C-2 (using 40 mm graded stone aggregate), as in bed to drain pipes of 150mm bore incl packing under and haunching against the sides of pipes after thy are laid and testing complete all as specified and as directed.
S&F in repairs bib taps long body suitable for 15mm bore of pipe, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair Stop valves suitable for 15mm bore of pipe, cast coper alloy,screwed down,high pressure,with round handle knob chromium plated, fancy type, screwed complete all as specified and as directed.
Taking down copper/aluminium point wiring, (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
M & L for surface point wiring complete with 2x1.5 sq mm FRLSH,PVC insulated multi standard copper conductor single core cable 1100 volts grade (Red/Yellow/Blue colour), drawn into non metalic PVC Casing/caping medium grade of suitable size and fixing accessories, fixed on wall/ roof etc, and including provn of PVC insulated 1.5 sq mm FRLSH (Green colour) copper conductor for each continuity and connected to common earth dolly and PVC terminal boxes fixed on wall for housing the switches socket,outlet etc.,for one light point controled by one one way 5 Amp switch complete all as specified and directed by Engineer-in-Charge. Note :- Cost of PVC casing/caping, making good disturbed wall surfaces, matching with existing shade/pink of the painted surface are deemed to be included in the quoted rate.
All as per Item No.89 above but one fan point controlled by one , one way 5 Amp switch complete all as specified and directed by Engineer-in-Charge.
All as per Item No.89 above but one 5 pin socket outlet 05 Amp on independent board complete all as specified and directed by Engineer-in-Charge.
All as per Item No.89 above but one 5 pin socket outlet 05 Amp on same board with other switches complete all as specified and directed by Engineer-in-Charge.
Material and labour for providing point wiring for 3/6 pin,15/16 Amps switch socket outlet controlled by one, one way switch on independent board by using 2.50 sq.mm (nominal area), multistranded copper conductor cable IS-694, single core PVC insulated FRLSH unsheathed cable (Maintaining Colour Code) 1100 volts grade in and including non metallic rigid PVC casing/caping, 25mm dia including PVC accessories / fittings and fixtures and fixed on surfaces of wall/RCC ceiling by using gutties etc.as per actual requirement as per site,with and including new PVC board/PVC terminal box of adequate size, with and including all accessories and using 2.5 sq.mm (nominal area), stranded copper conductor, single core PVC insulated FRLSH unsheathed cable green in colour as earth continuity conductor connected to common earth dolly and connecting upto fittings complete all as specified and directed.
S&F Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket 20 Amps, 240V complete with one single pole MCB all as specified and directed.
S&F Fan regulators electronic stepped type all as specified and directed.
S&F Switch piano flush type, 6 amps, 230V AC,single pole, one way all as specified and directed. .
S&F Switch socket combination multipurpose suitable for 2 pin and 3 pin 6 amp flush type all as specified and directed.
S&F Switch socket combination multipurpose suitable for 2 in 1 , 3 pin 5 & 15 amps flush type all as specified and directed.
S&F Socket outlet type 2 in 1 3/5 pin 5 Amps with other switches all as specified and directed. .
S&F Ceiling rose, 3 terminals, surface bakelite,PVC/Polycarbonate all as specified and directed.
S&F LED tube light fitting 4 ft. 1 x 18 watt with 230 volts, with bipin holder connector block, LED retrofit tube rod etc complete with all accessories internally pre-wired and fixed to walls/ceiling with screw on round PVC blocks including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
Supply and fixing round shape 12 watt 220 volts AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders LED lamp suitable for roof ceiling including connecting up with three core flexible copperconductor cable of suitable size all as specified and directed.
Supply and fixing LED street light fitting 36 Watt, 230 V AC outdoor type with high pressure die, cast aluminum hosing and heat resistant complete with driver, lamp bracket for mounting on wall with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and connection all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.
S & F Fan hooks made of MS clamp deformed to proper shape including nut & bolts and drilling/cutting roof as required at site and fixing fan hook with existing steel reinforcement all as directed by Engr-in-charge.
M & L Sub main wiring complete with 2 runs of 10 sq mm FRLSH single core, PVC insulated,unsheathed cable,1100 volts grade,multi standard with copper conductor drawn through and including PVC casing caping and accessories on surface wall/floors/concealed etc. with one run of FRLSH PVC insulated 10 sq mm copper conductor for earth continuity conductor including taking down old unserviceable wiring complete all as specified and directed. Note :- Two runs of cable one run of casing caping and one run of copper wire shall be measured as one unit length.
S & F MCB SP 6 to 32 Amps 240 volts complete all as specified and directed.
S & F MCB SPN 6 Amps to 32 Amps 240 volts complete all as specified and directed.
S&F single pole and neutral DB wall mounting type,240 Volts, 8 Way with 200 Amps rated bus bar,double door suitable for fixing MCB's including connecting etc and taking down unserviceable DB ,main switch complete all as specified and directed.
S&F Exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep with, blades, and frame and louvers incl provn of hole of 450mm dia, circular in shape in wall with fixing accessories and connection all as specified and directed.
S&F Lamp Holder insulated body with back plate angle/straight type suitable for batten complete all as specified and directed.
S&F LED Blub 10 watt Self Ballasted Retrofit type lamp with PBT body shell and DC Diffuser CCT 6500 K with fitting complete all as specified and directed.
Supply,installation and testing of invertor hi wall split units, indoor/outdoor complete 4-in-1 convertible type with cordless remote control unit and with in built airioniser and Plasma filter for better indoor air quality with minimum 3.0 star rating and energy efficiency rate-ISEER 3.70 of capacity 1.5 TR including installation of complete set and provn of 01 x wall mounting bracket for outdoor unit, connection and testing complete all as specified and directed.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.0 KVA complete all as specified and directed.
M/s HALDER ENTERPRISE
MAA COMMUNICATION
M/s PRABIR ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .