GE (W)/HSR-59/2024-25 SPL REPAIR OF OR LIVING LINE IN BLDG NO T-404 AND T-405 AT HISAR MIL STN

Amount

Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete all as specified and directed.

Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete all as specified and directed.

S&F Powder coated Anodised aluminium frame for doors, frame for sliding windows (three panels, two pans for glass and one for wire mesh), frame for normal double panel window ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated Anodised aluminium sliding windows shutters, aluminium section weighing 0.35 kg/m including all necessary items like -joining cleats, glazing clips, ruber neoprene packing, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately. (ii) Rubber beading will not be weighed and not to be paid seperately.

S&F Powder coated Anodised aluminium door, shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately. (ii) Rubber beading will not be weighed and not to be paid seperately.

S&F powder coated aluminium deco grill fixed to powder coated windows complete all as specified and directed.

S & F Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed.

S&F door closer Aluminium (Die cast) body hydraulic regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body 150 mm long with rubber shoes complete all as specified and directed.

Supply and fixing 4.8mm thick tinted sheet glass ordinary quality and glazing with rubber bedding in square exc 0.5sqm in each pane complete all as specified and directed.

Supply and fixing 4.8mm thick tinted sheet glass ordinary quality and glazing with rubber bidding in square n exc 0.5sqm in each pane complete all as specified and directed.

S&F as in brass Mortice lock,vertical type, 4 lever size 100 mm complete all as specified and directed.

S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc (thickness of sheet shall be 1.25mm) including PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats complete all as specified and directed.

S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) including PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats complete all as specified and directed.

M&L 30mm thick factory Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides The shutter shall be fitted to chowkhats complete all as specified and directed.

M&L 35mm Glazed and skeleton shutters second class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters complete all as specified and directed.

M&L for Preparing new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed 100 mm complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 150 mm complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clip of sheet,cast or extruded section, bolt not less than 16 mm dia, 300 mm long complete all as specified and directed.

S&F aluminium handles extruded fabricated type anodized of size 125mm complete all as specified and directed.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reiforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Factory made Factory Made Solid PVC Moulded Door Shutter with partical board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Dismantling asbestos cement corrugated or semi corrugated sheets as in roof covering complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall ,fixed with self tapping screws complete all as specified and directed.

M&L Pre painted galvalume alumimnium zinc coating GI based Plain steel sheet 0.50 mm th, sheeting of any colour having tensile strength of 550 mpa as in ridges etc, complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid framed work for false ceiling and incl hangers 6mm dia G.I (upto 1200mm long ) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40x3mm size 60mm long and expansion holdfastener 12.5mm dia 40mm long complete al as specified and directed.

S&F False ceiling with calcium Silicate board, , factory made matt finish surface, 600mm x 600mm in size and 6mm thick complete all as specified and directed

S&F hollow PVC wall paneling, super strong quality single side prelaminated with flat or fancy patterned on laminated side, incl PVC 'L' and 'U' sections for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement requrired at site on walls complete all as specified and directed.

M&L glazed ceramic coloured tiles, (350x450)x7mm / (350x250)x7mmthick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match including dismantling of old floor hearth or wall tiling complete all as specified and directed.

M&L Virified Ceramic tiles 10 mm thick (square/ ectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over and incl 15 mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of old floor hearth or wall tiling complete all as specified and directed.

M&L non skid ceramic tiles 7 to 8 mm thick light shade (Square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over and including provision of cement screed bedding layer 15 mm thick in CM 1:6 etc set and jointed in neat cement slurry and pointed in coloured cement to match including dismantling of old floor hearth or wall tiling complete all as specified and directed.

M&L for coloure Chequered cement concrete tiles with grey cement/ coloured and pigments (PU moulded) 300mm x 300mm x 25mm thick, set in 20mm thick screed bed CM of (1:6), jointed and pointed in neat cement slurry in floors/paths including dismantling of old floor hearth or wall tiling complete all as specified and directed.

M&L 75mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

M&L for 1:3:6 (20mm aggregater) for coping and side filling and other pcc work complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided, for MS railing at passage, stair and rear sitouts complete all as specified and directed.

M&L for rolled sections as in tubular trusses / rafter / purlin fixed with angle cleats or other connecting plates, other iron work confirming to FE-410 (Gde-E-250) complete for holding galvallume sheeting in passage complete all as specified and directed.

S & F in repair fancy type Stainless steel curtain rod 25mm dia including SS brakcet, knobs, rings stops, rollers etc complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:6 over brick / concrete wall surfaces trowelled to even & smooth without using extra cement for internal wall surfaces including taking down old cement plaster complete all as specified and directed.

Description all as per itme No 42.00 above but 15mm in CM 1:4 mixed with liquid type water proofing compound as per manufacturers direction on external surfaces including taking down old cement plaster complete all as specified and directed.

Supply only liquid type water proofing compound complete all as specified and directed.

M&L Rough cast plaster as specified .(Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall upto cill height including taking down old cement plaster complete all as specified and directed.

M&L two coats of Oil bound distemper on new plastered or unplastered surfaces over and including 1 mm thick acrylic wall care (Birla / JK white / Asian / Berger) putty and a coat of alkali resistant primer on walls including preparation of surfaces complete all as specified and directed.

M&L two coats of Oil bound distemper on old plastered or unplastered surfaces over and including 1 mm thick acrylic wall care (Birla / JK white / Asian / Berger) putty and a coat of alkali resistant primer on walls including preparation of surfaces complete all as specified and directed.

M& L for preparation of newly plastered surfaces of wall and applying two coat of Weather coat paint over one coat of alkali resistent complete all as specified and directed.

M& L for preparation of old surfaces of wall and applying one weather coar paint complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 including demolition of existing sotne slab complete all as specified and directed. Note : Single piece tiles will be placed on the surface of stair case tread area.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on external walls in CM 1:4 complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approvedcolour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; including demolition of existing paver block complete complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L RCC M-1:1.5:3 nominal mix in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Dismantling of cast iron pipes or PVC pipes any size of bore as in soil waste or vent pipe including removal of cement joints fixed to wall or laid in floor complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75mm bore complete all as specified and directed.

S&F PVC(SWR) bends any radius 110mm bore complete all as specified and directed.

S&F PVC(SWR) bends any radius 75mm bore complete all as specified and directed.

S&F PVC (SWR) single juction (single 'T') equal or unequal provided with access door of 110 mm bore complete all as specified and directed.

M&L PVC(SWR) vent cowls 75/110mm bore complete all as specified and directed.

S& F PVC (SWR) floor trap 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed.

S& F PVC (SWR) floor trap two way 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing in repair full pedestal wash basin (590X490mmx185mm) vitreous china including cutting for holes pinking in ends of brackets for erecting stand including waste pipe and waste coupling and waste pipe complete all as specified and directed.

S&F in repair Vitreous china wash basin white flat back size 550 x 400mm size, including cutting for and pinning in ends of brackets or erecting stand but including of fixing of supply and waste pipe,32mm PTMT waste coupling, complete all as specified and directed.

S&F in repair cabinate mirror of decorative type complete all as specified and directed.

S&F in repair fancy type chromium plated with long shank and cup (concealed type) stop valves, cast copper aloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specified and directed.

S&F in repair Wall Mixer 3-in-1 System Aerator complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.

S&F brass CP basin mixer long shank / pop up for mixing hot & cold water screwd down for iron pipe and fixed in repair complete all as specified and directed.

S & fixing in repair 15mm bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed for iron pipe complete all as specified and directed.

S & fixing in repair chromium plated fancy type stop valves, angle valve cast copper alloy screwed down high pressure fixed to pipe of 15mm bore all as specified.

S & fixing in repair ball brass valve polythene float of 20mm bore complete all as specified and directed.

S & fixing in repair PVC Connection 15mm size with PTMT nuts of Length 600mm complete all as specified and directed.

Taking up or down steel water tubing and connection including cleaning for refixing or removal of 15mm bore complete all as specified and directed.

Description all as per item No 83.00 above but of 20 bore complete all as specified and directed.

S&F steel water tubing galvanised 15mm bore, medium grade fixed to walls and ceiling or in floors including fitting complete all as specified and directed.

S&F steel water tubing galvanised 20mm bore, medium grade fixed to walls and ceiling or in floors including fitting complete all as specified and directed.

S&F15 mm Brass Elbow for special fitting of galvanised pipe complete all as specified and directed.

S&F Brass Tee 15 mm for special fitting of galvanised pipe complete all as specified and directed.

S&F 20 mm Brass Elbow for special fitting of galvanised pipe complete all as specified and directed.

S&F 20 mm Brass Tee 16mm for special fitting of galvanised pipe complete all as specified and directed.

Supply & fixing in repair One piece WC with 10 ltrs capacity interal cistern with floor mounting frame, installation kit, drain pipe connection set, including necessary cuttingcutting to wall / floor making good to walls / floor complete all as specified and directed. Make - Parryware, Jaquar or equivalent

Supply & fixing in repair Vitreous China wash down water closet pan (pedestal pattern), with P and S trap with and including plastic water closet seat cover, connected to trap, flushing pipe , anti-syphonage pipe etc complete all as specified and directed.

S& F of PVC valveless syphonic type 10Ltr capacity flushing cistern with inlet , ball valve and handle including flush pipe of pvc 32mm dia, complete all as specified and directed.

S&F in repair Health Faucet with hose & hook complete all as specified and directed.

S&F in repair Toilet paper holder Chromium plated, fixed in wall complete all as specified and directed.

S&F Liquid soap container of CPT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick heet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair corner glass Shelf of fixed with including all fitting required complete all as specified and directed.

S&F in Repair Towel Rail 600mm long of CP fixed and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

S&F Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F rotional moulded polythylene water storage tank(White in colour) of 500 ltr (Tripple layer white in colour Cylinderical vertical with closed top) hoisted kand fixed in position including dismantling of old water tanks complete all as specified and directed.

S&F rotional moulded polythylene water storage tank(White in colour) of 1000 ltr (Tripple layer white in colour Cylinderical vertical with closed top) hoisted kand fixed in position including dismantling of old water tanks complete all as specified and directed.

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe complete all as specified and directed.

S&F Grating round 140 mm size of PTMT (Minimum weight 50 gms) complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Taking down eaves gutter or RWP of any description complete all as specified and directed.

S&F 150mm dia PVC (RWP) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified and directed.

Cutting into existing manholes for connecting new drains, any dia bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching complete all as specified and directed.

M & L for PCC (1:4:8) type D-2 using40mm graded stone aggregate in foundation/ filling and mass concrete complete all as specified and directed.

M&L for precast reinforced cement concrete type B1, 1:2:4 using 20mm graded stone aggregate in cover slabs (for manholes etc), water (tank/drain) cover, shelves, landing and similar articles with plain faces incl necessary moulds and setting in CM 1:4 complete (reinforcement to be measured separately)

High strength TMT steel bars as in reinforcement 5 to 10 mm dia cut to length, bent to shape required, including cracking, bending spirally for hooping for columns, hooking endsand binding with and incl mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Grinding and polishing of existing kota stone floor as directed by Engineer-in-Charge complete all as specified and directed.

M&L for precast louvres and jallies, in cement concrete 1:2:4 type B 0 using 12.50 mm graded crushed stone aggregate set in CM 1:6, 35 mm thick (measured solid), including all mould- ings but excluding frame including dismantling old cement concrete jalli complete all as specified and directed.

S&F for pre cast post for jaffri jalli of 1:2:4 type B-0 (12.5mm graded aggragate) of decorative type having size 60cm height complete all as specified and directed.

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with switches/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per existing treatment complete all as specified and directed.

Description all as per item No 120.00 above but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed.

Description all as per item No 120.00 above but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

Description all as per item No 120.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed

S&F Modular switch 1 way 16A 1 module all as specified and directed

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F modular fan step regulator 120W-2 module suitable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed.

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S&F in repair Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing in repair MCBs SP 6 to 40Amps, B-curve, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Taking down old unserviceable submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable for phase, one run of 6 sqmm cable for earthing and one run of PVC conduit will be measured as one unit.

S&F in repair Sheet metal enclosure distribution board TPN, 4way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers proper with pcc works complete all as specified and directed .

Supply and fixing TPN 63 Amps, 415 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCCB should be the same as that of DB

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

S&F Air Circulator fan plastic body 200/250 Sqmm with plastic louver & making a suitable hole also including complete all as specified and directed.

OM CONSTRUCTION CO. (BID ID -3166899)

malik constructions (BID ID -3161992)

m/s krishna engineers1 (BID ID -3162671)

Siya constructions (BID ID -3161955)

S K BUILDERS (BID ID -3162903)

DHARMA CONSTRUCTION (BID ID -3168387)

M/S KAVITA CONSTRUCTION (BID ID -3162781)

M/S SM BUILDER CO (BID ID -3165673)

M/S RAJESH KUMAR & SONS (BID ID -3168025)

Balaji Construction Co. (BID ID -3162541)