Special Repair and Maintenance of Indoor Stadium at Chetlat

Amount

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Sheet

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metre and below

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead.

Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer,welded and bolted including special shaped washers etc. complete.

Providing and fixing Coloured (Trafoled) Aluminium sheet roofing fixed with galvanized iron J or L hooks and 8mm dia C.I Plain bitumen washers complete excluding the cost of purlins,rafters and trusses corrugated sheet 0.56mm thick.including fixing 40mm width 12mm thick aluminium plate on aluminium sheet fixed with G.I.J or L.Hooks.

Providing ridges or hips in coloured Aluminium sheet roofing with G.I/J or L hooks bolts and nuts 8mm dia G.I.Plain bitumen washers.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete .For fixed portion,Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete .For Shutters portion,Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Gradel Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc.complete.Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): W ith float glass panes of 5.50 mm thickness

Providing and fixing 35 mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. First class Karimaruthu or equivalent ( Double leef shettre)

Providing and fixing anodised Aluminium sliding door bolt anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete. 300x16 mm

Providing and fixing anodised Aluminium tower bolt (barral type) anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete.

Providing and fixing anodised Aluminium handle anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete.

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing Bright finished brass Hydraulic door closer with necessary fittings &screws

Providing and fixing Bright finished brass casement stay with necessary fittings and screws 200 mm weighing not less than 240gms

Providing and fixing 4mm Bamboo board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): Bamboo board 4mm thick

25mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with :second class teak wood

French spirit polishing : One or more coats on old work

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead :Cement mortar 1:4

12mm cement plaster 1:3 (1cement :3 metal sand) finished with floating coat of neat cement

Wall painting with plastic emulsion paint of approved colour,brand and manufacture to give an even shade One or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work

Providing and fixing Stainless steel (Grade 316) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fastners, stainless steel bolts etc,. of required size on the top of the floor or the side of waist slab with suitable arrangements as per approval of Engineer-in- Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work).

(a) 25mm nominal bore

(b) 32mm nominal bore

(c) 40mm nominal bore

Providing and fixing CP brass bibcock of approved quality and manufacture complete. 15 mm nominal bore

Providing and fixing CP brass angle cock of approved quality and manufacture complete.15 mm

Providing and fixing CP brass Sink cock of approved quality and manufacture complete.20 mm

Providing and fixing white vitrous China water closet Pedestal pan (European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required.

Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. white vitrous china flat back wash basin 550x400mm with one 15mm C.P brass piller tap

Providing anf fixing Stailess steel A ISI 304 ( 18/8) kitchen sink asper IS 13983 with CI brackets stainless steel plug 40 mm ,including painting of fittings and brackets, cutting and making good the walls where required. Kitchen sink with drain board 510x1040 mm bowl deth 250 mm

Providing and fixing ball valve ( PVC ) of approved quality and manufacture complete. 32 mm nominal bore

Providing and fixing health faucet of approved quality and manufacture complete.

Providing and placing Sintex water tank on terrace up to the roof two level of approved quality and manufacture complete (a) 1000 Litre capacity

Providing and fixing towel rail brackets fixed to wooden cleat with scerws and washers . (a) 600 x 20 mm CP brass towel rail with brackets 600mm long towel rail brackets with total length of 645mm width 78mm and effective height of 88 mm weighinig not less than 190 gms.

Providing and fixing PTMT liquid soap container with CP brass lid and bracket fixed to wooden cleats with scerws and washers .

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fitting s including trenching and refilling etc. External work (6kg/cm2)

110 mm nominal bore

90 mm nominal bore

63 mm nominal bore

50mm nominal bore

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of Fine sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge

UMMER BAITHULHUDA