PROVISION OF TWO SENTRY BOXES ALONG WITH CO-LOCATED SANITARY ANNEX AT SAIDAPET LAND UNDER AGE(I) NAVY CHENNAI

Amount

Surface Excavation nt exc 30 cm deep and averaging 15 cm deep and getting out in Hard/ Dense soil complete all as specified. and as directed by engineer-in -charge.

Excavating over areas not exceeding 1.50m deep and getting out soft soil complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5M wide and not exceeding 1.5 M in depth for foundation etc and getting out in soft/loose soil complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard /Dense soil complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation,filling and mass concrete complete all as specified.

Cement concrete in foundations, filling and mass concrete in PCC Type C2 1:3:6 Complete all as specified and as directed.

Brickwork with fly ash bricks cm 1:6, straight or curved on plan exc 6m mean radius, built in complete all as specified and as directed.

Material and labour precast cement concrete block masonry type B1 1:2:4 (20 mm aggregate) with solid block exc 10 cm width and setting in mortor complete all as specified and asdirected

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

M&L Reinforced cement concrete M20 using 20 mm graded stone aggregate as in beams,lintel beam, columns , pillars, Piers , Posts and struts etc all as specified complete all as specified and as directed by engineer-in-charge

Reinforced cement concrete M 20 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material & Labour for Formwork to chajjas,chullah hoods,troughs and similar items with fair finished complete all as specified and as directed by engineer -in-charge.

TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Mild steel TMT bars 6 to 8 mm dia cut to length bent to shape required cranking hooking and binding with and including M.S. wire all as specified

TMT bars 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for internal renderning 10 mm thick in CM 1:6 finished with even and smooth surfaces of cement in Internal surfaces of wall & floor complete all as specified and as directed.

M&L for external renderning 15 mm thick in CM 1:4 finished with even and smooth surfaces mixed with wpc of cement in Internal surfaces of wall & floor complete all as specified and as directed.

Material and labour for rendering 10 mm thick in cement mortar 1:3 as in ceiling surfaces, finished fair and evenwithout using extra cement complete all as specified.

Supply only water proofing compound complete all as specified and as directed.

Material and Labour for preparation of newly plastered / concrete surfaces and applying two coats of oil bound distemper over a coat of primer over 3mm thick birla wall care putty ccomplete all as specified and directed. (Make :- Interion grade acrylic emulsion shall be of the make : Asian paints "Premium Emulsion", Nerolac Paints "Beauty Gold Acrylic Emulsion, ICI Dulux "Super Smooth Acrylic Emulsion, Berger " Rangoli Acrylic Emulsion).

M&L for two coats of cement based paint newly external plastered surfaces over one coat of primer incl preparation complete all as specified and as directed.

M&L for three coat of white wash on newly plastered surfaces on celing incl preparation complete all as specified and as directed.

M&L for concrete type C-2, 1:3:6 (40 mm aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

M&L for concrete type B1, 1:2:4 (40 mm aggregate) 40 mm thick as in concrete floor base finished even and smooth without using extra cement complete all as specified and as directed.

M&L for concrete type E2 1:5:10 (40 mm aggregate) 75 mm thick as in concrete floor base finished even and smooth without using extra cement complete all as specified and as directed.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Forming construction joints 50mm deep X 10 mm wide and filled with sealing compound grade 'A' complete all as specified and as directed.

Material & Labour filling with Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface are complete all as specified and as directed.

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

Matetial and labour for 40 mm thick cement concrete type B1 1:2:4 (12.5mm graded stone aggregate) as in damp proof course (DPC) etc.,complete all as specified and as directed by engineer -in-charge.Note:- WPC will be measured and paid separetly for respective item.

M&L for PCC 1:2:4 type B1 ( 20 mm graded aggregate),100mm thick as in flooring with broom finish surface complete all as specified. and as directed by engineer-in -charge..

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Brickwork 1:6 CM with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in complete all as specified and as directed.

M&L joint free Non Skid ceramic coloured tiles7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement fo match, with screed bed 15mm thick in CM 1:6 complete all as specified and as directed by Engineer -in -charge .

M & L for 10 mm thick screed bed in CM 1:3 for vertical surface tiling complete all as specified

Glazed ceramic tiles (200x200mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

S&F in EWC Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but incl heavy duty seat cover complete set complete all as specified.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in low level PVC valveless, syphonic action type flushing cistern, white with inlet,ball valve float, and handle including brackets, flush pipes to padestal pan including all joints all as specified and as directed by Engineer-In-Charge.

Supply and fix of Wash basins, vitreous china (flat back or angle back type) of 550x400mm, including 32mm waste coupling , cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe.complete all as specified and directed.

Supply and fix forPVC waste pipe of 32 mm dia for sink and WHB complete all as specified and directed

Supply & Fixing of Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fancy type

supply & Fixing of Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

Supply and fix in PVC (SWR) floor trap, 75mm dia plainwith grating including jointing with solvent cement complete all as specified and directed.

PVC connections 15mm size with PTMT nuts but length complete all as specified and directed by engineer-in-charge

supply & fixing of 15mm Galvanised steel tubes, light grade complete all as specified and as directed

supply & fixing of 20 mm Galvanised steel tubes, light grade complete all as specified and as directed

Supply and fix in Fancy type CP stop valve 15mm dia cast copper alloy, chromium plated fency type with long shank and cup (concealed type) screwed down high pressure with half turn type knob/capstan heads, screwed both end for iron pipe or for unions and fixed.complete all as specified and directed Make :-plumber

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 ltrs hoisted and fixed in position all as specified in SSR Part I

Supply and fix in repairs Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe size of 20mm bore dia complete all as specified and as directed.

S&F Tubular towel rail 20mm dia brass chromium plated.

S&F Soap dish any type fixed to plugs with chromium plated brass screws.

S & F 15mm dia brass stop valves cast copper alloy fancy type scrwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and as directed by Engineer-In-Charge.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Supply and fix for factory made solid PVC moulded door shutter, 28 to 30mme thick (stiles), with 2,4 or 6 raised panel designed with 4mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification and drawing complete all as specified and directed.

Supply and fix for 75mm size, Butt hinges, heavy weight, SS, and fixed complete all as specified and directed

Supply and fix aluminium handles cast type anodised for 100 mm complete all as specified and directed

Supply and fix for aluminium, anodised barrel tower bolts of extruded section and fixed for 100mm length complete all as specified and directed

supply and fixing of Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

supply and fixing of Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Supply & fixing of 4.0 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors along with screed bed 20 mm thiclk in CM 1:6 complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2(using 40mm graded stone aggregate ) in concrete bed to drain pipes incl packing under and haunching againest the sides of pipes after they are laid and tested for pipes of 150mm bore.

M&L Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded granite stone aggregate) as in coping including necessary form work and all as directed.

Supply and fixing of PVC SWR pipes of 110 mm dia single socketed with rings of any length complete all as specified and directed.

Plain cement concrete 1:3:6 type C2 (using 40mm graded granite stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after thy are laid and tested for 150mm dia bore

Precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landing, cover slab (for man holes etc) shelves and similar articles with plain faces and set in CM (1:4) including use & waste of formwork complete all as specified and as directed.

P.C.C 1:2:4 type BO (using 12.5mm graded stone aggregate) as in surface channels and drain, all as specified

Extra forming fair finished drain or channels of 30cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc.

Construction of On site Hume Pipe septic tank for 05 Users designed to carry sewage and sullage water including excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete all as specified.

Construction of Soakage wells of size 1.2 M dia X 1.5 M effective depth for 05 Users including excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC duly filled with brick bats complete all as specified

M & L for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed.

(a) One light point controlled by one switch

(b) One switch socket outlet modular type 3 pin 6 amp on same board.

All as per item No 77.00 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.

S & F Switch modular type, single pole one way 6 Amps

S & F 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed.

S & F socket modular type 6 Amps multistandard 240 volts all as specified and as directed.

M & L for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed.

S & F for Modular white cover plate with frame,3 Module

S & F for Modular white cover plate with frame,6 Module

S & F for Modular Metal flush box,3 Module

S & F for Modular Metal flush box,6 Module

Supply and Fix wall mounted LED batten with decorative end cap of capacity 4feet 20W or nearest higher wattage ,2500 lm ,6500 K suitable for Surface, Wall & Conduit mounting complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and lamp complete all as specified and directed internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and directed.

Supply and fix LED light fitting, bulk head luminaries 10 W or nearest higher wattage with Pressure Die cast housing LED bulkhead with IP66 Protection and IK09 impact resistance suitable for surface and wall mounting applications of 230V, 50 HZ complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and lamp complete all as specified and directed .Make :Bajaj,Model :Cat Part No BIBW 10W or equivalent in Philips / CG.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

S & F sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs,IP-43 , 4way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.

S & F MCB SPN, 40 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.

S & F MCB SP 10-32 Amps, breaking capacity 10 KA 'B' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.

M & L for earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 4 mm GI wire as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 in SSR part 1 connected to earthing test point,including 20 mm GI pipe (Medium grade) for watering and 15 mm GI pipe (Medium grade) for protection of earth wire and etc.. including testing on completion ,PCC chambers in PCC1:3:6 type C1, RCC M25 type cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wiremesh ,funnel,lugs and charcoal,salt etc all as applicable complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix Exhaust fan 225 mm , heavy duty , single phase ,Rust proof body and blades, double ball bearing with noisless operation, complete all as specefied and as directed.

Supply and fixing High density poythelyne (HDPE) pipes of pressure rating 6kgf/ sq/ m of size 40 mm for cable protection laid in trenches complete all as specified and directed

Supply & Laying cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core on wall with suitable clipping with 40 mm HDPE Pipe complete all as specified and directed.

AnnaiEnterprises (BID ID -3168155)