Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.7 LAccepted-AOC WARD NO 07 WARD NO 07 THANA PARA NALHATI BIRBHUM WEST BENGAL 731243 | BIRBHUM | WEST BENGAL | 731243 | L1 | Accepted-AOC AOC | |
| 2 | L2₹44.0 L+₹2.8 L (6.89%)Rejected-Finance | L2 | Rejected-Finance QUOTED AMOUNT IS HIGHER THAN L1 BIDDER | |
| 3 | L3₹44.7 L+₹3.5 L (8.59%)Rejected-Finance E 140 2010 BKP VILL AMTALLA PO DUMARCHIR DIST PAKUR PIN 814111 JHARKHAND | PAKUR | PAKUR | JHARKHAND | 814111 | L3 | Rejected-Finance QUOTED AMOUNT IS HIGHER THAN L1 BIDDER | |
| 4 | L4₹44.8 L+₹3.7 L (9.03%)Rejected-Finance | L4 | Rejected-Finance QUOTED AMOUNT IS HIGHER THAN L1 BIDDER | |
| 5 | L5₹45.3 L+₹4.2 L (10.1%)Rejected-Finance | L5 | Rejected-Finance QUOTED AMOUNT IS HIGHER THAN L1 BIDDER |
Tender Value
₹40.5 L
EMD Value
₹81,000
Closing Date
28 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI ARVIND KUMAR SHARMA IDSE SE CWE
HQ CWE AF PANAGARH MILITARY ENGINEER SERVICES AIR FORCE STATION ARJAN SINGH PO BIRUDIAH DIST BURDWAN WEST BENGAL PIN 713148
PROVN OF ATTACHED TOILET AT SNCOs MESS AT AF STATION SINGARSHI UNDER AGE (I) (AF) SINGARSI
2023_MES_601613_1
82398/SING/E8
Open Tender
Civil Works
Item Rate
180 days
AGE I AF SINGARSI
Please refer tender documents
9 documents required · 9 mandatory
₹500
AGE I AF SINGARSI
₹81,000
Yes
15 Sept 2023
7 Jun 2023
5 Jul 2023
7 Jun 2023
28 Jun 2023
21 Jun 2023
8 Jun 2023 - 12 Jun 2023
Amount
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified ad as directed.
Demolition of cement concrete reinforced in ground floors and pavings n exc 15 cm thickness including removal complete all as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out as in soft/loose soil complete all as specified and as directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick as in soft/loose soil complete all as specified and as directed.
M&L for Cutting holes in stone walls exc. Half brick thick but n.exc one brick thick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all complete.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc. complete all as specified and as directed.
M&L for cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) in cement mortar 1:4 including 15mm thick cement plaster in proportion 1:4 and pointing etc. complete all as diredted.
Taking down chowkath or frame with shutters (without taking off shutters from the frame exc 1.5 Sqm & n.exc. 4 Sqm each, making good the disturbed portion and removing the taking down materials from site of work complete all as specified and as directed.
M&L for walling of random rubble, uncoursed well bounded, bedded and solidaly hearted, built in cement mortar 1:4 complete all as specified and as directed.
M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L for plain cement concrete1:4:8 type D2 (using 40mm graded aggt) in foundations, filling and mass concrete complete all as specified and as directed.
M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as directed.
M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in half brick thick wall built in cement mortar (1:4) complete all as directed.
Material and labour for 15 mm thick rendering in cement mortar 1:4, mixed with water proofing compound on external brick surfaces, on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified. Note:- Water proofing compound will be measured & paid separately under respective item.
Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified.
Material and labour for 10 mm thick rendering in cement mortar 1:3 on ceiling surfaces, finished the surfaces even and smooth without using extra cement complete all as specified.
Supply only liquid water proofing compound.
Material & labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggt) as in sub-base of floor or as in plinth protection complete all as specified and as directed.
Material & labour for 100mm thick PCC 1:2:4 type B-2 (using 40mm graded aggt) as in flooring finished the concrete surface even & smooth without using extra cement complete all as specified and as directed.
M&L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces complete all as specified and as directed.
M&L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items in cluding edges etc rough finished surfaces complete all as specified and as directed.
M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc rough finished surfaces complete all as specified and as directed.
M&L for RCC M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M&L for RCC M-25 design mix as in chajja etc. complete all as specified and as directed.
M&L for RCC M-25 design mix as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per BOQ item No 29 above but 8mm dia and over as in stirrups, spacers and binders etc. complete all as specified and as directed.
S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming Fe-410W (Gde-E-250) quality B complete all as specified & as directed.
M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & as directed.
Material and labour for MS plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc. complete all as specified and as directed.
Material and labour for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5cm and n exc 30cm long and dia of bolt 11mm to 15mm complete all as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Material and labour for 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and as directed.
Material and labour for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.
Material and labour for Non - skid colour Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles complete all as specified and as directed.
Material & labour for Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tiles complete all as specified and as directed.
Material & labour for Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes etc. complete all as specified and as directed.
Material & labour for Screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4 for receiving tiles on vertical surfaces of wall etc. complete all as specified and as directed.
Supply and fix 100 mm long aluminium anodised barrel tower bolts of extruded section all as specified.
Supply and fix 100 mm long stailess steel butt hinges, medium weight, all as specified.
Supply and fix 150 mm long aluminium anodised handle cast type complete all as specified.
Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
Supply & fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
Material and labour for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Material and labour for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
All as per BOQ item No 49 above but glazing bars (for mosquito proof shutter) etc. complete all as specified and as directed.
Material and labour for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.
Supply & fix steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed.
Supply & fix 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.
Supply & fix framed work such as grills, gratings, etc.. with ends of bars shouldered and/or iveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc. complete all as specified and as directed.
Material & labour for PCC 1:3:6 type C-1 (using 20mm graded aggt) as in hold fast block including necessary formwork fair finished the exposed surfaces of concrete and making good the surfaces with existing surfaces complete all as specified and as directed.
Material & labour for preparaion of new or previously untreated surfaces of wall and applying three coats of white wash complete all as specified and as directed.
Material & labour for preparaion of new or previously untreated surfaces of wall and applying three coats of colour wash complete all as specified and as directed.
Material & labour for preparaion of new or previously untreated surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.
Material & labour for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth, not otherwise described and applying two coats of systhetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
S&F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed.
Supply and fix PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.
Supply and fixing Vitreous China wash basin, white, flat back, size 550x400mm including brackets, cutting or pinning ends of brackets complete all as specified and as directed.
Supply and fix in repair PVC connection pipe 15mm size with PTMT nuts of length 450mm to flushing cistern and WHB complete all as specified and as directed.
S&F 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F swivel shower of PTMT any colour for fixing with 15mm pipe (Max weight 40gms) with shower arm a5mm size, 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and as directed.
S&F 15mm bore angular stop cock/valve cast copper alloy screwed down high pressureed with batterfly handle screwed both ends for iron pipes fancy type chromium plated (concealed type) all complete as specified and as directed.
S&F 15mm bore stop valve cast copper alloy screwed down high pressureed with batterfly handle screwed both ends for iron pipes fancy type chromium plated (concealed type) all complete as specified and as directed.
S&F in repair 15mm bore bib tap fancy type chromium plated with long shank & cup complete all as specified and as directed.
S&F 15mm bore pillar taps, fancy type (long neck) cast copper alloy with capstan heads chromium plated or without letter hot or cold with long screwed and shanks and fly nuts screwed for iron pipes all complete as specified and as directed.
S&F in repair 15mm dia two way long body bib cock with wall flanges fixed with iron pipes complete all as specified and as directed.
S&F in repair Aqua health fauchet with flexable tube and wall hook complete all as specified and as directed.
S&F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as directed.
S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as directed.
S&F towel Ring of PTMT fixed with and including Chromium plated brass screws and ooden/plastic cleats (Minimum weight 90gms) complete all as directed.
S&F tubular towel rail, 600mm long, 20mm dia, PTMT between flanges complete all as directed.
S&F 15mm bore GI tubes, medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F 20mm bore GI tubes, medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F 100mm dia cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.
S&F 100mm dia cast iron (sand cast) bend of any redious with oval access door including jointing with cement joints complete all as specified and as directed.
S&F 100mm dia cast iron (sand cast) bend of any redious with duck's foot or heel rest including jointing with cement joints complete all as specified and as directed.
S&F 110mm bore cast iron (sand cast) junction single (Single - T) equal or unequal including jointing with cement joints complete all as specified and as directed.
S&F 110mm bore cast iron (SWR) trap 'P or 'S' type including jointing with cement joints complete all as specified and as directed.
S&F 110mm bore PVC (SWR) vent cowl complete all as directed.
S&F 110mm bore PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixecto wall complete all as directed.
S&F 110mm bore PVC (SWR) bend any redious complete all as directed.
S&F 110mm bore PVC (SWR) junction single (Single - T) equal or unequal complete all as directed.
S&F 75mm bore PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixecto wall complete all as directed.
S&F 75mm bore PVC (SWR) bend and Tee any redious complete all as directed.
S&F 100mm dia PTMT grating doom (Min weight 25 Gm) for floor trap/nahni traps all as specified and as directed.
S&F 75mm bore PVC (SWR) floor traps, plain with gratings including joints with solvent cement etc. complete all as specified and as directed.
S&F rotational moulded polye thylene water storage tanks with triple layered white colour with ISI marked including plastic lid cover cylindrical vertical with closed top hoisted and fixed in position of capacity 2000 ltr including making connection, 20mm dia ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball (Min weight 210 Gm) screwed for iron pope complete all as specified and as diredted.
S&F CPVC ball valve (gate valve) quarter turn screwed both ends for CPVC pipe or for union of 25mm dia and fixed all complete as directed
S&F brass float valve, high pressure, with polythene float and flynuts complete screwed for 20mm bore iron pipe or brass ferrule and fixed complete all as directed.
S&F stop valve, cast copper alloy, serewed down, high pressure, with crustch or butterfly handle, serewed both ends for 20mm iron pipe or unoin and fixed complete all as directed.
Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.
Excavating over areas, exc 1.5 m and n.exc 3.0m deep and getting out in soft/loose soil complete all as specified and as directed.
M&L for brickwork with fly ash bricks in one brick thick honey-comb walling built in cement mortar 1:4 complete all as specified and as directed.
M&L for pre-cast RCC 1:2:4 type B-1 (using 20mm graded aggt) as in manhole, septic tank & soak well cover including necessary form work set & jointed in cement mortar 1:4 complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded aggt) as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150mm dia pipe complete all as specified and as directed.
M&L for 150mm dia Salt-glazed stoneware pipes grade-A laid in trenches and jointed complete all as specified and as directed.
Cutting salt-glazed stoneware drain pipe 150mm dia in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar 1:1 complete all as specified and as directed.
S&F salt-glazed stoneware gully traps, square or round mouthed, 150 x 150mm (Type p, q or s) setting & jointing with solvent cement etc. complete all as specified and as directed.
ELECTRIFICATION Note : Prior to commencement of electrical works, the contractor needs to submit valid Electrical Liscence in the name of himself/themself or Aggrement with agency having valid Electrical Liscence alongwith Agency's Electrical Liscense to the Accepting Officer for his approval through GE/AGE(I). In absence of such documents, no work will be executed at site and to be treated as defaulter on the Contrctor's part . In addition, Supervisor for execution of electrical works employed by the Contractor shall posses Supervisory Certificate of competancy issued by concerned State Govt/Union Territory and the Worker/Tradesman for execution of Electrical Works must hold necessary permit issued by concerned State Govt/Union Territory.
M&L for point wiring for one light/fan/bell with PVC insulatedmultistranded copper conductor FRLS cable 1100 volts grade size 1.5 Sqmm (nominal area) in and including PVC casing capping 20/30 mm width with one 1.5 Sqmm (nominal area) FRLS copper conductor cable green in colour as earth continuity wire and connected to earth dolly including PVC/wooden switch board on existing wall surface for one light/fan point /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall complete all as directed by Engineer-in-Charge.
All as per BOQ item No 105 above but one 3 pin switch socket outlet 5 Amp on independent board complete all as specified and as directed.
S&F switch socket outlet 3 pin 5 Amp, 230 Volts, flush type complete all as specified and as directed.
S&F in replacement of existing energy efficient tube light fitting of capacity 20 W suspended type/wall mounted type complete convet to LED fitting and copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length complete all as specified and as directed by Engr-in-charge.
M&L for ceiling rose, 3 phase/PVC/Polycarbonate, isolated body complete all as specified and as directed.
S&F for switch piano flush type 5 Amp single pole one way complete all as specified and as directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, oltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.
Supply & fix sheet metal enclosures for DB's double door suitable for mounting of MCCB's/MCB's/isolators. 240 Volts, Vertical TPN DB's 4 way with built in 160A rated bus bar and complete including making the disturb surfaces matching with the existing wall complete all as specified and as directed.
M&L for MCCBs 415V, 25KA, 4 Pole, overload adjustable 0.63-0.8-1 x in short circuit fixed 63 Amp breaking capacity complete all as directed.
Supply and fixing MCB, TPN, 240V, 16Amp, C-series breaking capacity 10KA, ISI marked complete all as specified and as directed.
Supply and fixing MCB, SPN, 240V, 16Amp, C-series breaking capacity 10KA, ISI marked complete all as specified and as directed.
Supply and fixing MCB, SP, 240V, 6 to 32Amp, C-series breaking capacity 10KA, ISI marked complete all as specified and as directed.
M&L for wiring for circuit/submain wiring through PVC casing caping of size 20/30mm alongwith earth wire with 2 x 6.0 Sqmm + 1 x 6.0 Sqmm FR is PVC insulated copper conductor, single core cable in surface/recessed as require complete all as specified and as directed.
M&L for wiring for circuit/submain wiring through PVC casing caping of size 20/30mm alongwith earth wire with 2 x 4.0 Sqmm + 1 x 4.0 Sqmm FR is PVC insulated copper conductor, single core cable in surface/recessed as require complete all as specified and as directed.
Supply & fix sheet metal enclosures for DB's single door suitable for mounting of MCB's 240 Volts, DB's 2 way without bus bar complete all as specified and as directed.
Supply & fix industrial plug and socket board with 20Amp MCB with sheet metal enclosure and plug top complete all as specified and as directed.
Supply and Fixing in replacement of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor (multistranded), 1100 volts grade connected with suitable cable gland and aluminium lugs of any size laid in trenches or passing through pipes including testing after laying, including taking up old UNSV cable complete of 70Sqmm, 3.5 Core size all as specified and directed by Engineer-in-Charge.
All as per BOQ item No 122 above but 16 Sqmm, 4 core complete all as specified and directed by Engr-in-Charge.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out as in hard/dense soil complete all as specified and as directed.
Supply and laying new dry river sand laid in trenches 8cm below the cable and 15 cm above the cable and punned to 18cm as cable cushioning and covering complete all as specified and directed by Engr-in-Charge. Note:- Punned quantity will be measured paid at this item.
Supply and laying in replacement of brick well burnt locally available sub class 'B' laid over sand cushioning for cable protection in trenches width of brick perpendicular to the length of cable including taking up of old UNSV bricks complete all as specified and directed by Engr-in-Charge.
EXTERNAL WATER SUPPLY
M&L for cutting existing steel tubing for inserting new Tee of 80x80x50 mm for tapping all as specified and directed. (Note: Necessary excavation, returning filling in & jointing etc. should be included in the rate quoted.)
M&L for gun-metal, globe or gate valves 50mm dia, with iron wheel head, screwed both ends for iron pipe and fixed.
M&L for gun-metal, globe or gate valves 40mm dia, with iron wheel head, screwed both ends for iron pipe and fixed.
M&L for galvanised steel tubes, medium grade 50mm dia with all fitting complete laid in trenches complete all as specified and as directed.
M&L for galvanised steel tubes, medium grade 40mm dia with all fitting complete laid in trenches complete all as specified and as directed.
Supply, Install, Testing and commissioning of geyser electric driven (single phase), having capacity of 25 litre of 5 star rated with SS braided flexible hot/cold flexible water pipe and including all accessoried complete all as specified and directed.
M/S SINGH ENTERPRISE
M/S MBS TRADING CO
M/S Subhadip Enterprise
P .BANERJEE AND CO
M/S AMARNATH AGARWALLA
M/S KUMAR AVINASH
DANATION CONSTRUCTIONS
M/S ASHA ENTERPRISE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .