PROVISION OF MARRIED ACCOMMODATION AND ALLIED FACILITIES FOR COAST AIR ENCLAVE NEDUMBASSERY KOCHI PACKAGE II

Amount

SCHEDULE "A" Part - I (BUILDING WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-II ( EARTH WORK AND SITE CLEARENCE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-III (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (ROAD/PATH/CULVERT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (STP TREATED WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-X (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XI (LIGHTENING PROTECTION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XII (AVIATION LIGHT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XIII (TV / TELEPHONE LINES & SOCKETS ) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XIV (FIRE FIGHTING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XV (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

PILE FOUNDATION Boring Cast in situ DMC pile of 600mm dia to any depth through any type of soil/strata by DMC method using bentonite slurry including removal of bored materials outside MD land complete all specified and directed and shown in drawings. Note:- (i) The rate shall include mobilisation,erection,dismantling and demobilisation of equipment for pile boring including all labours and material. Nothing extra shall be payable for mobilisation of equipment separately. (ii) This item will be executed as per location marked in drg.

Reinforced cement concrete of grade RMC M-30 design mix as per IS – 456 with using 20mm graded stone aggregate in cast in situ bored pile of any length/any sections complete all as specified and as shown on drg as in bored pile including non destructive integrity test on all pile as per IS-14893,2001 part-IV. (Note: The unit rate quoted under this item is deemed to be inclusive of charges for non destructive integrity test)

RCC grade RMC M30 design mix as per IS–456 using 20mm graded stone aggregate in pile caps , grade beams etc complete all as specified and shown on drg. Notes for Sl item Nos 15.02 & 15.03 :- Reinforcement shall be measured and paid for separately under relevant items of this Schedule.

Providing TMT bars (CRS/HCRM/CRM) in reinforcement 10mm dia and over for bored piles of any length and any dia all as shown on drgs including cut to length, bend to required shape, cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and shown on drgs.

Ditto All as per item No 15.04 here-in-before but for pile caps complete all as specified and directed.

Providing TMT bars (CRS/HCRM/CRM) in reinforcement 5 mm dia end over up to and including 10mm dia conforming to IS-1786 as in Helical/stirrups for piles cut to length, bent to shape required, and binding with 0.9mm dia MS annealed wire or welding complete all as specified, directed and as shown in drawings.

PCC 1:4:8 type D2 using 40mm graded stone aggregate for concrete layer below pile caps and foundation complete all as specfified and as shown in drg

Formwork to sides of concrete foundation, pile caps etc rough finished surface of concrete flat. All as specified and as directed.

Excavating over areas, n exc1.5 m deep and getting out for In Soft/loose soil for pile cap

Excavating over areas, exc 1.5 m deep and getting out in soil for foundation in soft/loose soil for pile cap beam

Returning/filling in layers and ramming in layers around pile cap,plinth beam etc using excavated soil incl sprading,levelling,well ramming in layers not less than 25cm thick complete all as specfified and as directed

Removing excavated material exc 1.5Km n.exc 5Km and depositing where directed at a level n.exc 1.5m above starting point

Testing of piles (Initial Load test for compression load, lateral load & uplift load) all as per IS 2911 including mobilising and removing the testing equipments from site after testing is completed all as specified and directed for 600mm dia cast in situ pile. Note: Rate inclusive for casting of 04 piles for above test. However concrete, steel and boring shall be measured under respective items

Testing of piles (Routine Load test) all as per IS for 600mm dia Cast in situ piles including mobilising and removing the testing equipments from site after testing is completed all as specified and directed. Note: Only compression load test shall only be carried out for Routine load test.

INTERNAL WATER SUPPLY S & F Two way bib tap 15 mm complete all as specified & directed

S & F 15mm Sink Cock complete all as specified and directed.

S & F Health Faucet with wall hook complete all as specified and directed Make Hindware Model No F160027 or equivalent in list of approved Make attached

Supply, install, testing & commissioning of Honeywell elster Honeywell domestic type water meter (V100 of flow rate 7.5l/h to 20m3/h) for metering of domestic outlet of the overhead tank.

INTERNAL ELECTRIC SUPPLY S & F modular type bell ding dong of 2 module size, conforming to IS: 8884- 1978 complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 43 or equivalent in list of approved Make attached

S & F modular type 1 module TV socket complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 25 or equivalent in list of approved Make attached

S & F 36 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: HavellsCat-Part No. LHEXACP7IN1W036 or equivalent in list of approved Make attached

S & F 20 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: HALONIX Cat-Part No. HLB-08-20-CW-AL or equivalent in list of approved Make attached

S & F 16 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: Philips Cat-Part No. BN308C-LED205-6500 L120PSUWH or equivalent in list of approved Make attached

S & F 20 W LED Building Security light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 100 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket 1.2 m long with including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and light grade GI pipe (25 mm), including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed. Make: BAJAJ Cat-Part No. BAJAJ 169829 BCLST 20W LED I or equivalent in list of approved Make attached

S & F BEE five star rated energy efficient BLDC ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. Make: Crompton Cat-Part No. ENTRUST50 or equivalent in list of approved Make attached

S & F energy efficient non-metalic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. VENTILUS 10"or equivalent in list of approved Make attached

S & F engery efficient metalic exhaust fan having blade sweep 300 mm, air delivery not less than 900 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. TRANS AIR 12" or equivalent in list of approved Make attached

Supply, installation, testing and commissioning of factory made, CPRI type tested, indoor cubical compartmental type BUILDING PANEL (G+7) of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge. The Building Feeder Panel shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 400 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING [i] 250 A, 415 V, Ics = 100% Icu = 50 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc. [ii] LED phase indicators (Red, Yellow, Blue)- 01 Set (iii) Digital multi function meter -01No, CT's 250/5A, CL-1, 15VA -01 Set [C] OUTGOING [i] 32 A, 230 V, Ics = 100% Icu = 10 kA, 50 Hz SP MCB- 35 NOS. (for 34 QTR & Common Area) [ii] 63 A,415 V, Ics = 100% Icu = 16 kA, 50 Hz FP MCCB- 1 NOS. [iii] Space for energy meter- 35

Supply, installation, testing and commissioning of factory made, CPRI type tested, indoor cubical compartmental type BUILDING PANEL (G+5) of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge. The Building Feeder Panel shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 250 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING [i] 160 A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc. [ii] LED phase indicators (Red, Yellow, Blue)- 01 Set (iii) Digital multi function meter -01No, CT's 250/5A, CL-1, 15VA -01 Set [C] OUTGOING [i] 32 A, 230 V, Ics = 100% Icu = 10 kA, 50 Hz SP MCB- 26 NOS. (for 25 QTR & Common Area) [ii] 63 A,415 V, Ics = 100% Icu = 16 kA, 50 Hz FP MCCB- 1 NOS. [iii] Space for energy meter- 25

Supply, installation, testing and commissioning of Cl1.0 accuracy ,Tamper Proof, high durability, sleek LCD display energy meters having current range 10-60 A, capable of measuring kWh parameters complete all as specified and directed. 1- Phase energy meter (10-60 Amp) Make: L&T Cat-Part No. WM101BC7DDH or equivalent in list of approved Make attached

S & F MCB for AC applications conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, etc. complete all as specified and directed by engineer-in-charge. (a) 6 A, SP MCB, C- curve

(b) 16 A, SP MCB, C- curve

S & F moulded case circuit breaker (MCCB), four pole, in single frame size up to 250 A with thermal magnetic trip unit (TMD), compression lug connectors, protection against overloads (Ir adjustable from 0.7- 1 X In), protection against short circuits (Isd adjustable from 1.5- 10 X Ir), inbuilt encapsulated double break roto active type instanteneous protection, earth fault leakage protection, etc. having Ics = 100% Icu as per IEC 60947-2 complete all as specified and directed by engineer-in-charge. a) 100 A, 415 V, 16 kA, 50 Hz FP MCCB

b) 32 A, 415 V, 16 kA, 50 Hz TP MCCB

S & F single phase contactor with astronomical digital timer (DP- 32 A) complete all as specified and directed.

ROAD/PATH/HARDSTANDING Providing and fixing reflective road studs (Raised pavement markers ) of category 'A' made out of poly carbonate /ABS moulded body and shanks and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conforming to ASTM D4280 also confirming to MORTH circular No RW/NH.33023/10/97-DO III dt 11.06.97 and shall support a load of more than 13 t tested in accordance with ASTM D4280. Lenses shall be moulded of polycarbonate or methyl methecrylate conforming to ASTM D788 including installing by drilling the surface and fixing with adhessive.

Providing and erecting direction / place identification retro- reflectorised sign boards having area less than 0.9 sqm(3' x 3'), with 10 years warranty, manufactured as per IRC :67:2012 using Type XI ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheeting , 2mm thick vide clause 801.3, supported on mild steel angle iron post 75mm x 75mm x 6mm, firmly fixed to the ground by means of properly designed foundation with M 20 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level including painting all non- reflective faces with epoxy paint 2 coats over epoxy primer

Providing and erecting direction / place identification retro- reflectorised sign boards having area exceedind 0.9 sqm (4' x 4'), with 10 years warranty, manufactured as per IRC :67:2012 using Type XI ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheeting , 2mm thick vide clause 801.3, supported on mild steel angle iron post 75mm x 75mm x 6mm, firmly fixed to the ground by means of properly designed foundation with M 20 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level including painting all non- reflective faces with epoxy paint 2 coats over epoxy primer

S&F Convex Mirror having 130 degree of viewing angle made of one piece polycarbonate lens size of 0.80 mtr dia protect with any type of light ray, not produce toxic fumes If burnt complete with counting hardware all as specified and directed.

EXTERNAL ELECTRIFICATION Supply, install, test and commission LT panel board, indoor type,factory made, powder-coated, dust and vermin and weatherproof outdoor, cubicle type, outer shell made of 2 mm thick CRCA sheet and MS angle iron section of 50x50x6mm frame, front operated with locking arrangements. The bottom of outer shell contains a detachable plate having provision for entry of armored cable of adequate size with with glands and provision of louvers and air vent gasket for natural flow of air .The panel board shall have suitable busbar chamber having sufficient space to pass through UG cable and compartments for each control gear and metering devices. Providing busbar for phase and neutral and shall be insulated with color-coded heat shrinkable sleeve and shall be mounted on suitable size 'F' class insulators made on non hygroscopic, non-combustible, track resistant, high-strength FRP/SMC/DMC material at an interval of not more than 300mm through out the length of TPN busbar all as specified and directed. (for DG Panel Type II & III) Aluminium bus bar for 3 phase, 440 volts, 50 Hz, 4 wire system of rating 200 Amps for phase and 100 Amps for neutral. Incoming MCCB 4 Pole, 415 Volts, 63 Amps, breaking capacity 36 KA - 01 No Metering unit R-Y-B indications (LED type) 1 sets Digital multi function meter 01 No, CT's- 63/5A, CL-1,15VA - 01 Set Outgoing (a) MCCB 4 Pole, 415 V, 40 Amps , breaking capacity 25 KA- 04 no (b) Contactor DP-32A with digital timer - 01No (c) Panel mounted Energy meter 3 Phase - 04 Nos (d) Energy meter - 1 Phase- 01 Nos

Supply and fix LED Street/security light fittings, new generation energy-saving and environmental friendly long life versatile die-cast aluminum IP 66 Luminaire with high power LEDs 45 Watts heat-resistant toughened glass with frame including 3 core 1.5 sqmm FRLS, PVC insulated multi stranded copper conductor cable for connection from junction box at the bottom of the pole to the light fittings including PVC protection pipe with necessary clamps bolts, nuts and washers all a specified and directed by engineer in charge. MAKE: Cat no ENDURAPEARLNEOSL45WLED757PASYTOPC or equivalent in list of approved Makes attached

Supply and fixed KD thermoplastic in boxes IP 55 metric knockouts for cable entry and four terminals suitable for LT cable upto size 4 core 50 Sqmm and the size of the box is 310mm x 210mm x 116mm.

Supply and fix LED floodlight 180 W IP 65, energy saving, environmental friendly, exclusive Innovation extruded aluminum housing with power LEDs as light source suitable for high mast lights Make Havells Cat No JETAVALOURL180WLED767MODNBLTG, Drive Male Havells Cat No ASSEMBLEDCGBOXVALOUR180WAP or equivalent in list of approved Makes attached

Supply and fix distribution board comprising of power contactor 32 A 3 pole, digital time switch, 230 volts including connection complete.

EXTERNAL WATER SUPPLY Supply and fix Cast Iron air release valve with 50mm bore and two outlets as per IS:14845.

Material and labour valve chamber of internal size 0.9m x 0.9m x 0.9m (internal Dimensions), including excavation of earth work in any type of soil, 150mm thick PCC 1:4:8 type D2 Foundation, brickwork in CM 1:6, 15mm thick rendering in CM 1:4 to both internal and external surface up to 150mm depth below GL PCC 1:3:6 type C1 as in coping, cover with two No of hinges and one No handle made out of MS Round bar 10mm dia with necessary locking arrangement including painting to the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown on drawing and specified. Note : The estimated cost includes all earthwork and connected items

TREATED WATER SUPPLY Supply and fix Cast Iron air release valve with 50mm bore and two outlets as per IS:14845.

Material and labour valve chamber of internal size 1.2m x 1.2m x 1.2m (internal Dimensions), including excavation of earth work in any type of soil, 150mm thick PCC 1:4:8 type D2 Foundation, brickwork in CM 1:6, 15mm thick rendering in CM 1:4 to both internal and external surface up to 150mm depth below GL PCC 1:3:6 type C1 as in coping, cover with two No of hinges and one No handle made out of MS Round bar 10mm dia with necessary locking arrangement including painting to the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown on drawing and specified. Note : The estimated cost includes all earthwork and connected items

AVIATION LIGHT Supply and fix Aviation obstruction light LED type including necessary cabling all as specified and directed. MAKE Bajaj Cat No BGAV 302 LED.

Supply & Fix 6 Amps SPN MCB

TV / TELEPHONE PIPES & SOCKETS Material & labour Standard metal flush box 1 module.

Material & labour Standard modular plate 1 module.

Material & labour Standard telephone socket RJ-11

GEYSER Supply & fix water heater storage type, electric, capacity 25 ltrs BEE 5 Star rated. MAKE : Havells Cat Part No: GHWAMGTWH025 or equivalent in list of approved Makes attached

Supply & fix geyser connection stainless steel flexible pipe of length 18" with checknut all as specified and directed.

M & L for copper conductor, XLPE insulated armoured cables, conforming to IS: BS EN 60228, having annealed copper conductor, PVC inner sheath, single armouring of galvanized round steel wire, one layer of PETP tape wrapping, collective screen of PETP/Aluminum tape over tinned copper drain wire, RED in colour, including clamping, termination and ferruling complete all as specified and directed. a) 2 core, 1.5 mm²

b) 2 core, 2.5 mm²

Supply and fixing fire extinguisher dry chemical powder (ABC) type 4 kg capcity IS 15683 all complete as specified and directed.

Supply and fixing fire extinguisher CO2 type 3 kg capacity squeeze gripoperative light weight IS 15683 all complete as specified and directed.

Supply & fixing ABC powder type fire extinguisher of 4 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket /floor trolley mounting accessories with suitable signage's etc. complete, confirming to IS:15683

Supply & Fixing Mechanical Foam type fire extinguisher 9Lts. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure CO2 gas cartridge, hose and ABS type branch pipe and wall mounting bracket /floor trolley mounting accessories with suitable signage's complete. confirming to IS: 10204

Supply & Fixing wall mounted 3W LED emergency Exit signage luminaire light up using regular mains supply comes with a unique rechargable Ni-Cd battery capable of emergency back up to 3.0 Hrs (make : Bajaj/ Crompton/ Wipro)

S & F Fire buckets (Dry sand) as per IS 2546

SOLAR LIGHTS Supply and install solar Standalone Streetlight system consists of Solar LED Luminiare 30W with high efficiency mono crystalline solar PV module, Solar Panel, Lithium Ferro Phosphate battery with inbuilt BMS technology, high efficiency LED, MPPT Solar charge controller and aluminium extruded body and aesthetically designed decorative hot dipped galvanised mild steel pole, 6m with grey powder finish window - Plasma cut & duly chamfered opening window of 300 x 110 mm for terminal connections & GI fabricated mounting accessories including excavation and all earthworks, PCC foundation for pole and all connected works as directed at site all as specified and directed. For fitting Make Haveils Cat No SSSSLX0140 ALL IN ONE 30 W SSL or equivalent in Bajaj/ Philips For pole Make Havells Cat No 7308 6M POLE

Material and labour Earthing complete with galvanized steel Earth plate electrode of size 600mmx600mmx6mm thick buried directly in ground vertically to a depth not less than 2.25 meters below the normal ground level with top edge of the plate not less than 1.5 meter below normal ground level and connected to galvanized iron strip 32 x 6mm size by means of bolts, nut. check nuts and Washers of galvanized iron steel all as shown in electric plate no 5 connected to earthing test Point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 ( using 20mm graded aggregate) common salt, charcoal, CI funnel or earth pit cover in RCC 1:2:4 type B1 ( using 20mm graded aggregate) with 8mm CTD bars @ 100mm c/c in both ways including necessary form work complete including necessary test on completion all are specified and directed. NOTE : The unit rate should also include for excavation, earthwork in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 40mm dia watering pipe, wire mesh, 40mm dia light grade GI protection pipe for Earth lead etc complete.

Material and labour Earthing complete with galvanized steel Earth plate electrode of size 600mmx600mmx6mm thick buried directly in ground vertically to a depth not less than 2.25 meters below the normal ground level with top edge of the plate not less than 1.5 meter below normal ground level and connected to galvanized earth wire 4mm dia by means of bolts, nut. check nuts and Washers of galvanized iron steel all as shown in electric plate no 5 connected to earthing test Point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 ( using 20mm graded aggregate) common salt, charcoal, CI funnel or earth pit cover in RCC 1:2:4 type B1 ( using 20mm graded aggregate) with 8mm CTD bars @ 100mm c/c in both ways including necessary form work complete including necessary test on completion all are specified and directed. ( Earthing to Poles) NOTE : The unit rate should also include for excavation, earthwork in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 40mm dia watering pipe, wire mesh, 40mm dia light grade GI protection pipe for Earth lead etc complete.

SOLAR POWER PLANT Supply, installation, Testing & commissioning of Solar Power Plant of 20 KW including solar panel, solar Inverter, Module Mounting structure and comprising of following: (i) Solar PV module Pmax 380 Wp monoperc cells efficiency not less than 16.20, Voc 30 Isc 09, 03 AR coated antimony free glass material 25 years performance warranty with connecting junction box all as specified Make Havells, Lanco, adani, TATA, Topsun 1143 no (ii) Grid tied inverters 3 phase 20 KW 50 Hz having 02 separate MPP tracker with SPD glass surge protection devices having efficiency 98% graphical display.inbuilt LED interface with RS485 and compatible for online monitoring systore suitable for Ambient temperature of KOCHI, protection IP 65, overvoltage/ under voltage protection all as specified. Make-Havells, ABB, Siemens, schneider, TATA Qty -01 Each ( 10 Years warranty (iii) DC solar distribution Box to colect the DC output from Array junction Box and supply to inverter weatherproof for outdoor applications and including MCB/MCCB of proper rating depending upon the cap of the power plant complete all as specified. MAKE : HPL, Schneider, Havells (iv) AC solar distribution Box to collect the DC output from Array Junction Box and supply to inverter weatherproof for outdoor applications and including MCB MCCB of proper rating depending upon the cap of the power plant complete all spd MAKE : HPL, Schneider, Havells (v) Grid interfacing unit having MCCB cap 63 Amp 4 Pole 25 KA microprocessor based all as specified. Make- Havells/ABB/L&T/Schneider/Siemens 01 Each set. (vi) Cables as per site requirement from PV Module To LT Panel: 1 Core X 4sqmm, 1 C X 6 Sqmm solar cable, 4Core X 10 sqmm,Cu unarmored. (vii) Online monitoring system Make Havells/ Delta/ KACO or as approved.

(viii) Hot dip galvanised MS/ Aluminium mounting structure for mounting of modules /array panels et, such structure should have angle of inclination as per site conditions take max insolation, mounting structure shall be designed to withstand the speed of 150 KM per hour be designed, fasting arrangements grouting, clamping etc provided to secure the installation against Online monitoring system Make- Havells/ Delta /KACO or as approved complete all as specified Note: The mounting structure shall be as per latest IS, galvanised of the mounting structure shall be in compliance, structural material shall be corrosion resistent and electrolyticaly compatible with the materials used in the module frame, its nuts and bolts the fasteners used should be make up of mild steel. the structures shall be designed to allow easy replacement of any module PCC foundation if required deemed to be included. (ix) Meter reading instruments with suitable software of capacity 16.5 MB to record reading through optical communicatin port of any type of meter Make Secure/ HPL Havells (x) 3 phase DLMS type integrated meter with inbuilt CT & GSM Modern energy meter having LCD display, 50 Hz +/- 5%, provision of sealing on mains cover and terminal cover IP 51, tamper information, inbuilt battery back up to active its display in absence of power. optical port for local communication, Optional RS232 port on RJ-11 for remote communication, in built memory for load survey data. Class 0.5s, ( 3X 240V (P-N), -/5A) Make Secure/ HPL

JAIN BUILDER

Jatan Constructions Private Limited

Mecone Construction Contractors

Agarwal Jagdish Construction Company Pvt. Ltd.

PUSHKARRAJ CONSTRUCTION PRIVATE LIMITED

Kurian And Varghese

Hariom Projects Pvt Ltd