PRELIMINARY TOPOGRAPHICAL SURVEY AND GEOTECHNICAL INVESTIGATION WORKS FOR 2x800 MW DVC CIL CHANDRAPURA THERMAL POWER STATION, BOKARO, JHARKHAND.

Total price for "PRELIMINARY TOPOGRAPHICAL SURVEY & GEOTECHNICAL INVESTIGATION WORKS FOR 2x800 MW DVC-CIL CHANDRAPURA THERMAL POWER STATION, BOKARO, JHARKHAND.", AS PER TENDER SPECIFICATION.

VOLUME-III PRICE SCHEDULE, REV-00

Job: PRELIMINARY TOPOGRAPHICAL SURVEY & GEOTECHNICAL INVESTIGATION WORKS FOR 2x800 MW DVC-CIL CHANDRAPURA THERMAL POWER STATION, BOKARO, JHARKHAND.

TENDER NO.: PSER:SCT:CHP-C2411:26:11338, dated 20-01-2026

Name of the Bidder/ Bidding Firm / Company :

PREAMBLE

This preamble forms part of tender document and schedule of items. The tenderer should read this preamble carefully before filling in rates for various items. Clauses under this preamble shall be read in conjunction with various volumes of tender and other tender sections as applicable and shall have precedence over any contrary statement mentioned anywhere in this document.

Items of work provided in this schedule but not covered in this specification shall be executed strictly as per instruction of the engineer.

Unless specifically mentioned otherwise in the tender document, the tenderer shall quote for the finished items and shall provide for the complete cost towards power, fuel, tools, tackles, equipment, constructional plants, temporary works, labour, strengthening of roads/culverts/bridges etc. including arranging all clearances etc. required for carrying out different activities & tests, materials, levies, transport, layout, repairs, rectification, maintenance, handing over, supervisions, establishments, overheads, profits and all incidental items not specifically mentioned but reasonably implied and necessary to complete the work according to the complete tender document and this schedule.

BHEL reserve the right to rationalize the rates, quoted by L-1 bidder against unit rate items and/ or other optional items with respect to item-wise lowest rates (amongst the participating bidders), before placement of order.

Rates shall be quoted in figures and in words in clear legible writing. No overwriting is allowed. All scoring and cancellations should be countersigned and in case of illegibility the interpretation of engineer shall be final. All entries shall be in English language.

All works item wise shall be measured upon completion and paid for at the rates quoted and accepted as per BHEL approved payment schedule/ billing break-up.

The tenderer shall be deemed to have visited site and made himself aware of all the site conditions, studied the specifications and details of work to the done within the time schedule attached and to have acquainted himself of the conditions prevailing at site before submission of his bid/offer. No claim whatsoever due to lack of knowledge of site conditions shall be entertained after award of the work.

No splitting of the job is envisaged unless the same is specifically indicated in the TCC / Vol-IF. Decision of BHEL in this regard shall be final and binding to the bidders.

Bidders are not allowed to alter the Price Schedule format including item description, quantity etc. and the offer is liable for rejection if the bidders submit their prices in Price Schedules modified by them. BHEL reserves the right to reject the offers of bidders who submit offers in Price Formats which are modiified/ altered by them. Also putting any comments instead of rates/price in the designated column of the rate schedule shall make the offer liable for rejection.

Engineer’s decision shall be final and binding on the contractor regarding clarification of items in the schedule with respect to the other sections/volumes of the contract.

No interest, whatsoever, shall be payable by BHEL on the security deposit, any bank guarantee submitted or any amount due to successful bidder/contractor.

Bidder's Total price shall be considered for evaluation unless stated otherwise.

VOLUME-III PRICE SCHEDULE, REV-00

Job: PRELIMINARY TOPOGRAPHICAL SURVEY & GEOTECHNICAL INVESTIGATION WORKS FOR 2x800 MW DVC-CIL CHANDRAPURA THERMAL POWER STATION, BOKARO, JHARKHAND.

TENDER NO.: PSER:SCT:CHP-C2411:26:11338, dated 20-01-2026

Name of the Bidder/ Bidding Firm / Company :

SCH-1 : TOTAL PRICE

Total price for "PRELIMINARY TOPOGRAPHICAL SURVEY & GEOTECHNICAL INVESTIGATION WORKS FOR 2x800 MW DVC-CIL CHANDRAPURA THERMAL POWER STATION, BOKARO, JHARKHAND.", AS PER TENDER SPECIFICATION.

Bidder shall quote total price for at sl no 1.0 above. All other amounts/ rates of each item of works in respective schedules/ parts (SCH-2, SCH-3, SCH-4.) will be derived based on allocated weightages and rates calculated thereof. As such, any uncalled figure/ amount noted at any other place/ schedule of Volume-III will not be recknoed & will stand null & void.

Bidder to note that total price at Sl No. 1.0 above shall be considered for evaluation & awarding. As such grand total price should be complete in all respect for the full scope defined and considering all terms and conditions.

SCH-2 is the Break-up of Total price. Break up of SCH-2 shall be as per SCH-3 & SCH-4. Bidder to note that SCH-3 covers scope of "GEOTECHNICAL INVESTIGATION" & SCH-4 covers scope of "TOPOGRAPHICAL SURVEY". Individual item rate at SCH-3 & SCH-4 shall be derived as per allocated weightages against the Total Quoted Price at SCH-1.

Based on the itemwise weightages allocations, the amount for the individual items of the Bill of Quantity shall be arrived at. The rates of individual items shall be derived from the amount against each items after roundeding off .

Bidders to note that this is an item rate contract. Payment shall be made for the actual quantities of work executed at the unit rate arrived

Based on the itemwise weightage allocations, the amount for the individual items of the Bill of Quantity shall be arrived at and item rates calculated thereof. The rates of individual items shall be derived from the amount against each items and its quantity and weightage after rounding off to upto 4 decimal places. However, RA bill payment shall be done after rounding off the gross amount to two decimal points. Any adjustment, if required, due to such methodology, will be effected / adjusted in final bill.

Any item as per scope of work, if not included in the price quoted above and shown separately will not be taken cognizance of and the offer shall be liable for rejection.

Price format shall not be changed by bidder in any case and it may lead to cancellation of their offer.

VOLUME-III PRICE SCHEDULE, REV-00

Job: PRELIMINARY TOPOGRAPHICAL SURVEY & GEOTECHNICAL INVESTIGATION WORKS FOR 2x800 MW DVC-CIL CHANDRAPURA THERMAL POWER STATION, BOKARO, JHARKHAND.

TENDER NO.: PSER:SCT:CHP-C2411:26:11338, dated 20-01-2026

Name of the Bidder/ Bidding Firm / Company :

SCH-2: BREAK-UP OF TOTAL PRICE

TOTAL PRICE FOR GEOTECHNICAL INVESTIGATION (SCH-3).

TOTAL PRICE FOR TOPOGRAPHICAL SURVEY (SCH-4).

TOTAL

VOLUME-III PRICE SCHEDULE, REV-00

Job: PRELIMINARY TOPOGRAPHICAL SURVEY & GEOTECHNICAL INVESTIGATION WORKS FOR 2x800 MW DVC-CIL CHANDRAPURA THERMAL POWER STATION, BOKARO, JHARKHAND.

TENDER NO.: PSER:SCT:CHP-C2411:26:11338, dated 20-01-2026

Name of the Bidder/ Bidding Firm / Company :

SCH-3: GEOTECHNICAL INVESTIGATION

Mobilisation of necessary equipments, men and materials to the project site for carrying out geotechnical investigation and demobilisation of the same after completion of all the field works etc. all complete as per specification, drawings and as directed by the engineer-in-charge.

Making 150mm nominal diameter bore hole up to a maximum depth of 25 m below ground level at various locations in all types of soil including laterite using suitable approved method of boring including chiselling, cleaning, providing casing pipes as required or as directed; performing standard penetration test at every 1.0m interval alternate to collection of undisturbed soil samples up to 10 m depth below ground level and at every 1.5m interval alternate to collection of undisturbed soil samples beyond 10 m depth, at change of strata and at depths wherever undisturbed soil samples could not be collected; collection of undisturbed sample (UDS) at every 1.0m interval alternate to conducting standard penetration test up to 10 m depth below ground level and at every 1.5m interval alternate to conducting standard penetration test beyond 10 m depth; collection of disturbed soil samples and water samples, sealing and packing of samples, observation such as ground water table etc; transportation of all the collected samples to the laboratory and back filling of boreholes with sand on completion of the same etc all complete as per specification and as directed by the engineer-in-charge.

Core drilling (Nx size) in rock using hydraulic feed rotary drill and double tube core barrel with diamond bit including collection of core samples, performing SPT at locations where core recovery is less than 20%, maintaining continuous record of core recovery and RQD, keeping the cores in wooden core boxes, transporting the cores to laboratory, back filling the holes with 1 part of cement : 3 part of sand grout on completion of the same etc all complete as per specification, drawings and as directed by the engineer-in-charge.

Excavating trial pit of size 3m x 3m at various locations up to 4m depth below ground level in all types of soil and in weathered rock/soft rock which can be excavated with pick axe/crow bar etc including sheeting or shoring the sides for the purpose of stability, dewatering and maintaining the pit dry at all times, collecting disturbed/undisturbed samples and transporting all the collected samples to the laboratory; backfilling of the pit with excavated material etc all complete as per specification and as directed by the engineer-in-charge.

Conducting laboratory test on soil samples at an approved laboratory including preparation of soil samples to determine the following properties etc all complete as per specification.

a) Bulk density and moisture content

b) Sieve analysis

c) Hydrometer analysis

d) Liquid limit and plastic limit

e) Shrinkage limit

f) Specific gravity

i) Unconfined compressive strength

m) Standard Proctor compaction test

n) Chemical analysis

Conducting laboratory test on rock samples including preparation of the samples to determine the following properties etc all complete as per specification.

a) Moisture content, porosity & density

b) Specific gravity

d) Unconfined compressive strength (both at saturated and in–situ water content)

e) Point load strength

Conducting chemical test on water samples to determine the carbonate, sulphate, chloride and nitrate contents, pH value, turbidity, organic matter and any other chemicals harmful to foundation material etc all complete as per specification.

Preparation and submission of draft report in 2 copies and final report in 3 hard copies and 2 soft copies on compact discs after the approval of draft report including all field records, laboratory test results, graphs, analysis of test results, photographs showing details of field tests/soil/rock samples/trail pits and recommendation etc. all complete as per specification.

TOTAL

VOLUME-III PRICE SCHEDULE, REV-00

Job: PRELIMINARY TOPOGRAPHICAL SURVEY & GEOTECHNICAL INVESTIGATION WORKS FOR 2x800 MW DVC-CIL CHANDRAPURA THERMAL POWER STATION, BOKARO, JHARKHAND.

TENDER NO.: PSER:SCT:CHP-C2411:26:11338, dated 20-01-2026

Name of the Bidder/ Bidding Firm / Company :

SCH-4: TOPOGRAPHICAL SURVEY

Carrying out bench mark from the nearest GTS bench mark or any other available source as approved by the engineer-in-charge to different locations in the project area including clearing of jungles and/or cutting trees and any other works required for completion of the said item etc all complete as per specification and instructions of the engineer-in-charge. (Construction of bench mark pillar to be paid separately)

Carrying out topographical survey of plant and allied areas showing all permanent & general features and detailed contour survey by taking spot levels at 25m interval, carrying out cross section of canal/nallah by taking spot levels at 5m interval or less including clearance of jungles and cutting of trees etc which are interfering with the survey works and any other field works necessary for the completion of the said item, preparation and submission of all plans (maps), reports, floppy and originals etc all complete as per specification and instructions of the engineer-in- charge.

Construction of bench mark pillar/reference pillar/grid pillar at different locations including clearing of jungles, excavation, supply of materials, pillar marking, backfilling, white washing, painting on MS plate etc all complete as per specification, drawings and instructions of the engineer-in- charge.

a) Bench mark pillar

b) Grid/reference pillar

TOTAL

Please Enable Macros to View BoQ information