REPAIR AND RENOVATION OF THE PUBLIC TOILET LOCATED IN VARIOUS GREEN BETLS, GARDENS AND PARKS UNDER THE JURISDICTION OF SDE MC PH SUB DIVISION NO.19, CHANDIGARH UNDER REVENUE HEAD.

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (DSR No. 13.46)

Providing & fixing of ceiling fan fitting including wring,testing commissioning as per site complete in all respect make crompton/Hawells/philips etc

Providing & fixing of Exhaust fan 9'' heavy duty including making connection complete in all respect make crompton/Hawells/bajaj etc.

Providing & Replacement of tube light 40 watt make crompton/Hawells/philips etc fitting including cost of chock,tube rod, proper wire complete in all respect

Providing & Replacement of LED bulb make crompton/Hawells/philips etc with holder fitting including writing,testing commissioning as per site complete in all respect

Providing & replacement gun metal Tap complete in all respect

Providing & replacement PVC waste pipe complete in all respect

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR No. 8.31)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1) cement 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shade Area of slab over 0.50 sqm as per DSR item No.8.2.2.2

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore (DSR No. 18.49.1)

Providing and fixing aluminum 16 gauge (minimum anodic coating of grade AC.15) doors including cost of chowkat for section size 2.5”x1.5” frame/shutter of 3.25”x1.75” including the cost of fittings handles stopper, glass complete in all respects.

Providing & replacement of english sheet cover complete in all respect

Providing & replacement of sheet jet complete in all respect

Providing & fixing of floor graiting jalli complete in all respect

Providing & fixing of door handle complete in all respect

Replacement of 1/2'' id floating ball valve complete in all respect

Repair of flush tank of W.C. seat complete in all respect

Providing and fixing on position best Indian make 5mm thick mirror mounted on water DOBLVC sheet ground fixed in positing by means of 4 No chromium plated brass screw and washed including the cost of wooden/ fiber bedding around complete in all respects.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm Make Kajaria, H R Johnsons, Spenza, Cera etc. (thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete

Replacement of old broken particle board doors with new doors alongwith proper bolting arrangement complete in all respects. (NSI)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore (DSR No. 18.51.1)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (DSR No. 18.48)make sintex/polywell/Diplast etc

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-(All work up to plinth level : 1:2:4 (1 cement: 2 coarse sand: 4 graded sione aggregate 20mm nominal size.

Providing and fixing of 1.5mm single core PVC insulated copper cable for wiring at toilet block complete in all respects.

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock (DSR No. 17.7B)

Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge. (DSR No. 14.13)

Excavating trenches of required width for pipes cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, In layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m All kinds of soll Pipes, cables etc exceeding 80 mm dia. but not exceeding 300 mm dia as per DSR item No.2.10.1.2

Providing and fixing in position best indian make ISI marked ball cock 25mm with brass rod, PVC ball complete in all respects.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. As per DSR item No.15.25

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth, Granite Stone of approved shade as per DSR item No.8.10.2

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V lavel in all shapes and sizes in Cement mertar 1.6 (1 cement: 6 coarso sand) as por DSR item No.6 4.2

Providing and laying in position coment concrete of specified grade excluding the cost of centering and shuttering - All work up to Plinth level 1:2:4 (1 cement 2 coarse sand 4graded stone aggregate 20 mm nominal size item No.4.1.3

12 mm cement of mix: 1:4 (1 cement: 4 coarse sand) as per DSR item No. 13.4.1

Providing and fixing white vitreous china pedestal type water closet (European type WC. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, whom to controlled device (handle lever), conforming to IS 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid as per DSR item No. 17 2.1.

Providing and fixing self cleansing design with screwed down of hinged grating with or without vent arin complete, including cost of cutting and making good the walls and floors 100 mm inlet and 75 mm outlet Sand cast ron S&S as per S-3969 as per DSR em No 17.60.21

Providing and fixing GI pipes complete with G.I. fittings and clamps, Vc cutting and making good the walls etc Internal work Exposed on wall 15 mm dia nominal bore as per DSR item No. 18.10.1

20 mm dia nominal bore as per DSR item No. 18.10.2

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G1 pipe etc. as per DSR item No.18.78

Providing and fixing G.I pipes complete with G fittings including trenching and refilling etc External 25 mm.dia nominal bore work as per DSR item No. 18.12.3

Cutting holes up to 15x15 cm in RCC floors and roofs for passing drain pipe etc and repairing the hole after insertion of drain pipe etc with cement concrete 1:2.4 (1 cement 2 coarse sand graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof as per DSR item No.18.77

Providing and fixing Gl Union in existing G.I pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required 20 mm nominal bore as per DSR item No. 18.47.2

25 mm nominal bore as per DSR item No.18.47.3

Providing and fixing of best Indian make (to the approved of the EIC) gun metal ISI peat valve complete in all respects, peat valve 20mm dia

peat valve 25mm dia

Providing and fixing of Gl. tank nipple AVR make complete in all respects 20mm dia

25mm dia

Providing and fixing gun metal non- return valve of approved quality (screwed end): 25 mm nominal bore as per DSR item No. 18.19.1

Providing and fixing square-mouth S.W gully tap clare SP-1 complete with C.I grating brickmasonry chamber with water tight C cover with frame of 300 x300 mm size inside the weight of cover to be not less than 450 kg and frame to be not less than 2.70 kg s per standard design: 100x100 mm size P pe With Sewer bricks conforming to IS: DSR item No 19.4.1.2

Providing and laying cement concrete 1:5:10 (1 cement 5 coarse sand 10 graded stone aggregate 40 mm nominal size) round SW pipes including bed concrete as per standard design 150 mm diameter S.W. Pipe as per DSR item No 19.2.2

Construction of brick masonry chamber for Cound C. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement 4 coarse sand) C1. cover with frame | ght duty) 455x510 mm internal dimensions, al weight of cover with frame to be not less man 38 kg (weight of cover 23 kg and weight of frame 15 kg). RCC top slab with 112.4 mx cement 2 coarse sand: 4 graded stone pregate 20 mm nominal size), foundation concrete 15.10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size). inside plastering 12 mm thick with cement mortar 1.3 (1 cement 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per DSR item No 19.30.2.1

Making connection of drain.or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 12.4 mix (1 cement: 2 coarse sand: 14 graded stone aggregate 20 mm nominal sze) cement plastered on both sides with cement mortar 1.3 (1.cement: 3 coarse sand), finished with a floating coat of neat cement and making necessary channeis for the drain etc complete For pipes 100 to 250 mm dameter as DSR item No. 19.21.1

Providing and fixing off CP grab Rail of size 50mm dia of suitable length as per site requirement for differently abled persons

Providing and fixing MS. holder-bat clamps of approved design to Sand Cast ironicast iron (spun) pipe embedded in and including cement concrete Blocks 10x10x10 cm of 1.24 mix (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. For 100 mm dia pipe as per DSR item No 17.37.1

For 75 mm dia pipe as per DSR item No. 17.37.2

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing & fixing of M.S. Gate of size 6' x 3' with 1 mm thickness M.S. sheet supported by 25 x 5 mm M.S. flat and angle of size 35 x 35 x 5 mm with frame angle 40 x 40 x 5 mm complete in all respects.

Providing and fixing of 6sqmm electricity cable for connection of toilet block with nearby electricity pole including excavation, mouling connection etc. complete in all respects.

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter S.W. pipe

Reinforcement for R.C.C. work including straightening cutting bending, placing in position and bending all complete.

Providing and fixing of laminated sun board of different size showing matter relates to Swacch Survekshan 2025, Swacch Toilet, SBM 2.0 Etc. At various public toilets as per direction of EIC.

Gents, Ladies, Child friendly and physical Handicapped boards etc.

Please Enable Macros to View BoQ information