RENOVATION OF ACOUSTICALLY TREATED AUDIMETRY ROOM, PROVISION OF OPEN GYM WITH CEMENTED PLATFORM AND DRAINAGE SYSTEM AT MTC, REPLACEMENT OF WOODEN DOORS INTO ALUMINIUM DOORS AT AFNET EQPT ROOM AND CERTAIN MINOR WORKS AT CHAF BANGALORE

Amount

COMMON ITEMS FOR JOB 'A' ,'B','C','D','E','F' &'G'(B/R & E/M)

Surface excavation not exceeding 30 cm deep and averaging 15cmdeep and getting out hard/dense soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil complete all as specified and directed.

M&L for PCC 1:4:8 Type D2 (40mm graded stone aggregare) in foundations, filling and mass concrete complete all as specified and directed.

M&L for Pre cast cement concrete block masonry with soild blocks, type C1, 1:3:6 using 20mm graded aggregate exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 10mm thick in cement morter 1:6 and 5mm thick in cement morter 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC shall be measured and paid separetely)

Supply only water proofing compound complete all as specified and as directed.

M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed..

M&L for machine pressed precast concrete interlocking coloured rubber moulded paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade laid over and including 40-50mm thick M sand cushion complete all as specified and as directed.

Removing Excavated soils exceeding 1.5 Km but not exc. 5 Km and depositing complete all as specified and as directed.

M&L for Rendering 10 mm thick on fair faces of brick works or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for glazed ceramic tiles coloured of size 450X 300X 7mm thick as vertical sruface set and jointed in neat cement slurry and pointed in white or colour cement mixed with pigment to match the shade of the tiles incl10 mm th rendering 1:4 for laying wall finishes complete all as specified and as directed.

M&L Granite 18 to 20mm thick of any type work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and tabil top for fixing wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite shade including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

S&F 8 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. Note: The rate shall be inclusive of scaffolding and necessary arrangements.

M&L for preparing new plastered surfaces of wall and applying two coats of oil emulsion distemper through mechanical means over one coat of chalk whiting primer over and including 3mm thick wall care putty complete all as specified and as directed.

M&L for preparing new plastered surface of walls and applying two coats of cement base paint over a coat of primer including necessary scaffolding complete all as specified and as directed

S&F Triple layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I , 500 Ltrs Capacity including dismantling existing 500 Ltr water tanks complete all as specified and as directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed.

S&F in repair Ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of dia 20 mm bore complete all as specified and directed.

Taking up or down 15 mm dia GI tubing surface/concealed laid in wall/flooor/ceiling/trenches complete all as specified and directed.

Taking up or down 20 mm dia GI tubing surface/concealed laid in wall/flooor/ceiling/trenches complete all as specified and directed.

Taking up or down 25 mm dia GI tubing surface/concealed laid in wall/flooor/ceiling/trenches complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm but n exc 4sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and as directed.

S&F 5.5 mm thick sheet glass, ordinary quality, fixied with necessary glazing clips, in squares exceeding 0.5 Sqm in each panel complete all as specified and as directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings & fixtures such as switches, ceiling rose, pendants, regulators, sockets, ceiling roses,pendants, regulators, light fittings etc. Removing materials to store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified & as directed.

S&F Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements concealed in Stone walls / brick masonary walls /ceilings / floors etc by cutting chasis in existing stone/ brick masonary, including fixing top cover /PVC /MS Modular type junction boxes concealed in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

One light controlled by 1 switch 5 amps, single pole.

One 3 pin switch socket out let point 5 Amps switch on independent board.

One Ceiling fan point controlled by one single pole 5 Amps switch.

One 3 pin switch socket out let point 5 Amps switch on same board.

S&F Point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.50 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements on Stone walls / brick masonary walls /ceilings / floors etc by cutting chases in existing stone/ brick machinery, including fixing top cover /PVC /MS Modular type junction boxes on Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 2.50 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed

S&F Modular switch , 1 Module single pole one way 10 Amps complete all as specified and directed .

S&F Modular switch , 1 Module single pole one way 16 Amps complete all as specified and directed .

S&F Modular socket , 2 Module 6 Amps, 2/3 pin, 240 volts Ac 2/3 pin complete all as specified and directed .

S&F Modular socket , 2 Module 6/16 Amps, 2/3 pin, 240 volts Ac 2/3 pin complete all as specified and directed .

S&F of modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm complete all as specified and as directed..

S&F Modular white cover plate with frame, 3 module complete all as specified and directed .

S&F Modular white cover plate with frame, 4 module complete all as specified and directed .

S&F Modular white cover plate with frame, 6 module complete all as specified and directed .

S&F Modular white cover plate with frame, 8 module complete all as specified and directed.

S&F Metal flush box 3 module complete all as specified and directed.

S&F Metal flush box 4 module complete all as specified and directed.

S&F Metal flush box 6 module complete all as specified and directed.

S&F Metal flush box 8 module complete all as specified and directed.

S&F PVC ceiling rose 65 x 50 mm surface type with 3 terminals complete all as specified and directed.

S&F MCB SPN, 32/40 Amps, 240 V, C- series with breaking capacity of 10KA complete all as specified and directed.

S&F MCB SP, 6-32 Amps, 240V, C- series with breaking capacity of 10KA complete all as specified and directed.

S&F sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 6.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed in stone wall, floor or ceiling etc by cutting chases in existing stone/ brick masonary inc 6.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

ITEMS APPLICABLE FOR JOB 'B':-

S&F in repair rotational moulded polyethylene water storage tanks white tripple layered (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge.

S&F GI Steel Tubes 15mm bore, 'medium grade', galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and as directed.

Refixing old steel tubing of 15mm bore and connections in new or old position (Walls, ceiling, floors, etc complete all as specified and as directed.

S&F GI Steel Tubes 20mm bore, 'medium grade', galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and as directed.

Refixing old steel tubing of 20mm bore and connections in new or old position (Walls, ceiling, floors, etc complete all as specified and as directed..

S&F GI Steel Tubes 25mm bore, 'medium grade', galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and as directed.

Refixing old steel tubing of 25mm bore and connections in new or old position (Walls, ceiling, floors, etc complete all as specified and as directed.

ITEMS APPLICABLE FOR JOB 'C':-

Taking down chowkat or frame with shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

Demolition of brick/PCC block work built in cement mortar incl. all quoins, arches pillars etc but excluding ashlar facings etc complete all as specified and as directed.

M&L for Providing precast cement concrete solid building blocks or slabs type C1 (1:3:6) using 20mm graded aggregate 10 cm thick (with plain or interlocking joints as directed) and setting in cement mortar 1:6 complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube including making good to jambs with CM 1: 4 and finished to match with existing surface complete all as specified and directed.

S&F factory made solid panelled PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail and bottom rail ,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joint together with solvent cement complete all as specified and directed.

S&F Pressed steel frames for doors size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed.

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded aggregate) as filling the chowkats/frames etc complete all as specified and directed,

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed.

S&F second class hard wood 35mm thick plain framed panelled shutter (2 panels) with lock rail and panelled of 9mm (BWP ) commercial ply or 12mm venered particle board with commercial veneering on both face the size of rail and style as per (IS 1003 PART I) kiln seasoned and chemically pressure treated section exc 13 and not exc. 25sqcm all as per specified and as directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

S&F floor door stopper of aluminiumalloy body overall length of cover plate 150mm and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding ( but not backing) and rubbish off the premisies complete all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in cement mortar 1:4 complete all as specified and directed.

M&L for vitrified ceramic coloured tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid over and including 10mm thick rendering in cement mortar 1:3 on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade all as specified.

Taking down cement plaster of any thickness on brick ,concrete ,PCC block or stone walls, ceiling etc including raking out joints hacking for key scrubing down with water etc complete all as specified and as directed.

M&L for rendering 5mm thick on concrete surfaces of ceiling in cement morter 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

S&F in repairs white colour vitreous china wash basin oval type (18 X 13 X 7 inch size) including brackets, 32mm dia CP waste coupling, waste pipe, short connection and fixing only pillar tap complete all as specified and directed.

Supply only 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed. Note:(Fixing rate shall be included in item No 75.00). Make: CERA - F2002101 or Techno-commercially equivalent in LEADER/ SEICO/ ZOLOTO/ JAGUAR/ SOMA/PRAYAG

S&F in repairs Vitreous China wash down water closet pan (Pedestal Pattern), White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc complete all as specified and as directed.

Supply only plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. Note:(Fixing rate shall be included in item No 76.00).

S&F 10 Ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, fixed as in repairs, complete all as specified and directed.

S&F in repair PVC connection pipe 450mm long 15mm dia both end having brass coupling nut and PVC washer complete all as specified and directed.

S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs 15mm two in one Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Brass Chromium plated fancy type towel rail, 20mm dia, D type 600mm long between flanges including brass CP brackets complete all as specified and directed.

S&F in repairs vitreous china white soap dish, appx size 160x160x90 mm , fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Toilet paper holder of stainless steel fixed by CP brass screw in wall complete all as specified and directed.

S&F in repairs 15 mm bore fancy type, chromium plated Stop valves / Angle cock screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions soap dish complete all as specified and directed.

S&F GI steel tubing,medium grade,15mm bore with all fittings fixed to walls and ceiling or laid in floors including cutting through walls and floors etc and their making good complete all as specified and directed.

S&F GI steel tubing,medium grade,20mm bore with all fittings fixed to walls and ceiling or laid in floors including cutting through walls and floors etc and their making good complete all as specified and directed.

S&F GI steel tubing,medium grade,25mm bore with all fittings fixed to walls and ceiling or laid in floors including cutting through walls and floors etc and their making good complete all as specified and directed.

Dismantling of PVC drain pipes of 75/100mm bore, including all fittings, jointed in cement mortar and taking out of trenches, if required and removing from site of work complete all as directed.

S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints laid in floor complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints laid in floor complete all as specified and directed.

S&F PVC (SWR) bend with access door 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bend 110 mm bore complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius with access door complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) double (double Y) branch piece, with access door 110 mm bore equal or unequal complete all as specified and directed.

S&F PVC (SWR) Branch piece single (Single Y) equal or unequal with access door 110mm bore complete all as specified and directed.

S&F PVC (SWR) Branch piece single (Single Y) equal or unequal with access door 75mm bore complete all as specified and directed.

S&F PVC (SWR) 110mm bore vent cowl complete all as specified and directed.

S&F PVC (SWR) 75mm bore vent cowl complete all as specified and directed.

S&F PVC (SWR) junction single (Single T) equal or unequal with access door 75mm bore complete all as specified and directed complete all as specified and directed.

S&F in repair PVC (SWR) 75mm dia multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed

M&L for preparing new plastered surface of walls and applying three coats of white wash complete all as specified and as directed.

M&L for preparing new plastered surface of ceiling and applying three coats of white wash including necessary scaffolding complete all as specified and as directed.

M&L Complete removal of exiting treatment and applying three coats of white wash on walls complete all as specifed and as directed

M&L Complete removal of existing treatment and applying three coats of white wash on ceiling including necessary scaffolding complete all as specifed and as directed

S&F for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders; framed balusters; walk ways; railings; framework of watertanks and similar work confirming to Fe-290, Gde E-165 complete all as specified and directed.

S&F Powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat forfixing etc. complete all as specified and directed.

S&F powder coating aluminium door shutters (any type, normal or sliding), aluminium section Powder Coating (minimum thickness of powder coating 50 micron) weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified and directed.

S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed.

S&F powder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and directed.

S&F for 4mm thick Figured glass, pin head type and fixed with aluminium beading in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

M&L preparation of plastered or un plastered old decorated surfaces of ceiling by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying two coat of white wash complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25 mm bore complete all as specified and as directed.

S&F solid PVC wall panelling decorative type consisting of 5 mm th plain colour PVC pre-laminated sheet inclusive of solvent cement and and fixing at site on PVC frame/wooden frame as per specification and drawing complete all as specified and as directed.

S&F for 5 mm thick PVC sheet fillets of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

Taking down ceiling fans from ceiling, dismantaling blades & refixing of the same including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

Taking down Exhaust Fans, from walls and refixing the same including connecting up and provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

Taking down Geyser from walls, refixing the same including connecting up and provision of cable complete all as specified and as directed.

s&F Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements concealed in Stone walls / brick masonary walls /ceilings / floors etc by cutting chasis in existing stone/ brick masonary, including fixing top cover /PVC /MS Modular type junction boxes concealed in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

One Exhaust fan point controlled by one single pole 5 Amps switch.

S&F office LED Luminaires type 40 watts, LED 600 x 600 mm Recessed type fixed in grid ceiling incl connecting up with PVC sheathed 1.5 sqmm 2 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S& of LED Light fitting, 22 Watts, 220 volts, with driver, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from Ceiling rose complete all as specified and as directed..

S&F of LED Light fitting, 10 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from Ceiling rose complete all as specified and as directed..

S&F of Sheet metal enclosures with socket plug top and MCB, Single pole & neutral enclosure with a 2 pin & earth plug & socket complete with one single pole MCB 20 amps complete all as specified and as directed.

S&F sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 10.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed in stone wall, floor or ceiling etc by cutting chases in existing stone/ brick masonary inc 10.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

S&F Sheet metal enclosure for DB's double door SPN, 8 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V, Concealed in walls including taking down old unsv from existing place complete all as specified and directed.

ITEMS APPLICABLE FOR JOB 'D':-

M&L for wall clading/Glazed earthenware Coloured tiles 6 to 8 mm thick including 10mm thick rendering in cement mortar 1:3 on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade all as specified. Note : Size, shape,colour and design of tiles shall be as approved by Garrison Engineer /Engr-in-charge.

M&L for 75mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring or pavings etc all as specified and directed

M&L for 75mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded stone aggregate) as in flooring or pavings etc all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and jointed in cement mortar all as specified and as directed.

M&L for Precast coloured cement concrete pavement tiles of size 400x400 mm and minimum thickness 15mm and above (Eurocon or Duracrete or Ultra make) laid over screed bed or bedding layer of cement mortar 1:6 of 20mm thick complete all as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates etc complete all as specified and directed.

S&F plates(plain or chequered) channels,distance pieces, cleats etc.square cut or notched including riveted, bolted or welded attachment complete all as specified and directed

S&F 6 mm thick multi cavity polycorbonate sheet in Sqm roof covering with necessary aluminum profile with EDPM gasket at every joint of sheet and overhead aluminum section of 25 mmx25mm, sheet and profile to be fastened to structure by using 45 mm SDST screws complete all as specified and directed. (Make of sheet - polygal/Laxan/GE)

M&L for preparing new plastered or un plastered old surface of walls and applying two coats of Cement base paint on walls (External) including with alkali resistant priming paint complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.of hard/dense soil complete all as specified and directed

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) as in plinth protection/sub base of floor complete all as specified and directed.

M&L for preparation of new surfaces of steel over 10cm in width or girth with two coat of synthetic enamel paint over coat of primer red oxide primer complete all as specified and directed.

Complete removal of existing treatement on wall and applying two coats of oil emulsion distemper through mechanical means over one coat of chalk whiting primer over and including 3mm thick wall care putty complete all as specified and directed.

M&L for preparing old plastered or un plastered surface of walls and applying two coats of Cement base paint on wall through mechanical means complete all as specified and directed.

S& of LED Light fitting, 1 x 20 Watts, 220 volts, decorative box type,with driver, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from Ceiling rose complete all as specified and as directed. Make: Baja model ivora LED batten CAT No: 830481 or techno commercially equivalent from Havells/ Wipro /Phillips

S&F Sheet metal enclosure for DB's double door SPN, 4 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V, Concealed in walls including taking down old unsv from existing place complete all as specified and directed.

ITEMS APPLICABLE FOR JOB 'E':-

M&L for PCC 1:3:6 type-C1 using 20 mm graded broken stone as in surface channel and drain incl necessary form work complete all as specified and directed.

M&L for providing cement concrete type B1,1:2:4 using 20 mm graded aggregate as in copings including formwork complete all as specified and directed..

M&L 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

M&L for sand filling under floors, cushning under interlocking tiles or in foundations incl watering and consolidations complete all as specified and directed.

ITEMS APPLICABLE FOR JOB 'F':-

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed. Note: Fittings shall be paid separately.

S&F 9 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timbe/Alumn frame work complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for sliding/openable doors, windows, ventilators and partitions fixed portions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285,, with using aluminium section 75mmx45mmx1.25mm as in partitions and and door chowkhat section door section 47.62mmx44.45mmx1.67mm,middle section of door 83.50mmx44.45x1.49mm and bottom of door section 114.30mmx44.45mmx1.75mm and not less than weighing 0.55kg/m if any section required including necessary jointing cleats, glazing clips, rubber neoprene packing, anodized aluminium snap beading screws,sliding arrangements, including Sheet glass of 5.5 mm thick and 12mm thick both side prelaminated particle board etc height of glass and particle as directed by Engr-in-charge as per site requirment incl dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket incl suitable hinge,aluminium handle and locing arrangements etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all necessary arrengement complete as specified and directed. Note : All the aluminium sections provided under this item shall be as per mentioned in the approved manufactures sections/fittings.

ITEMS APPLICABLE FOR JOB 'G':-

S&F Cortex Tile made up of 'Wood fiber cement composite' 1mm width wood fiber 25mm thick covered with Acoustically Transparent Woven Fabric on the front side, with an option of colors of size 600 x 1200mm having excellent noise absorption of 1 NRC (for the base panel) as per ISO:354 Fire Ratings as per BS 476 Part 5, 6 and 7 class 1 and P, water resistant and thermal insulated. Installed with PVC H Profile on GI studs 600x600mm center to center 2400mm x 50mm web thickness 0.5mm, flanges 15 and 50mm fully knurled giving it high strength, hot dipped galvanised steel with 120 GSM zinc coating with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results suitable for false ceiling as well as in wall panellings etc, complete all as specified and directed.

M&L for Acoustic Door of 56mm achieving sound reduction of upto 50 STC double layers of 8mm water proof Acoustic Ply with Dampner Sheet and double layer of 10mm compressed insulation and single layer of sound dampner 1218 x 1218 mm x 12mm made of 10mm compressed wood fiber cement composites 1250 Kg/Cum and 2 mm frame will be made of teak wood (Sudan Teak). Three side frame and drop seal below will be provided along with the door with high load bearing hinges etc, complete all as specified and as per manufacturer's instructions complete all as specified and directed.

S&F of LED Light fitting, 36 Watts, 2' x 2' Recessed type, with driver, connecting up with 2 core flexible copper conductor cable of suitable size from Ceiling rose complete all as specified and directed.

S&F of Sheet metal enclosures with socket plug top and MCB, Single pole & neutral enclosure with a 2 pin & earth plug & socket complete with one single pole MCB 20 amps complete all as specified and directed.

Cutting into or through the stone walls / brick walls built in cement mortar or cement lime mortar and walls of cement concrete suitable size for housing for sunk box using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed. NOTE :All the Chases/ groove cutting in stone walls/ brick wall/ block masonary walls as required for concealed wiring shall be measured and paid separately under relevant item no 162.00 &163.00

Cutting chases, pinning in Stone walls/ brick walls etc. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc, for concealed conduit wiring a into or through the stone walls built in cement mortar or cement lime mortar and walls of cement concrete suitable for housing 25mm dia conduit pipe using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed.

S&F Sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 4.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed in stone wall, floor or ceiling etc by cutting chases in existing stone/ brick masonary inc 4.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

S&F sub main wiring with Four single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 10.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed in stone wall, floor or ceiling etc by cutting chases in existing stone/ brick masonary inc 10.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : Two runs of earth continuity conductor,one run of PVC Conduit and Four runs of copper conductor together taken as one length for measuring unit length.

S&F Sheet metal enclosure for DB's double door TPN, 4 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 415 V, Concealed in walls including taking down old unsv from existing place complete all as specified and directed.

S&F MCB TPN, 63 Amps, 415 V, C- series with breaking capacity of 10KA complete all as specified and directed.

OM CONSTRUCTIONS (BID ID -3094830)