Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.0 LAccepted-AOC 60 MADHUVAN BANK COLONY ALWAR | L1 | Accepted-AOC Being lowest one | |
| 2 | L2₹34.6 L+₹61,138 (1.80%)Rejected-AOC | L2 | Rejected-AOC Not lowest | |
| 3 | Rejected-Technical | - | Rejected-Technical Adverse remarks in WLR |
Tender Value
Refer Docs
EMD Value
₹73,900
Closing Date
26 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
SPL REPAIR TO ROOF, CHAJJAS PROTECTION OF BLDG NO P-781 (CHILDREN SCHOOL) AT ITARANA ALWAR
2023_MES_610628_1
8190/E8
Open Tender
Civil Works
Item Rate
180 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
Yes
GE Alwar
₹73,900
Yes
6 May 2024
25 Jul 2023
28 Aug 2023
25 Jul 2023
26 Aug 2023
9 Aug 2023
25 Jul 2023 - 8 Aug 2023
Amount
Demolition cement concrete(unreinfored) as in ground floor and paving not exceeding 15cm thick below or above the ground level complete all as specified and as directed.
Demolition of brick work built in cement mortar or cement lime mortar including all quion arches complete all as specified and as directed.
M&L brick work with fly ash 'brick (old size brick) straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed.
Taking down cement or cement lime plaster, any description in any position on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed. Note : The rate is incusive of G+1 height.
M&L 15mm thick rendering in cement mortar 1:6 on other than fair faces of brick work surace finished even and smooth with out using extra cenent complete all as specified and directed. Note : The rate is incusive of G+1 height.
M&L15mm thick rendering in cement mortar 1:4 on fair faces of brick work surace finished even and smooth with out using extra cenent complete all as specified and directed. Note : The rate is incusive of G+1 height.
M&L 5mm thick rendering in cement mortar 1:4 on ceiling surface rendering is to be even and smooth with out using extra cenent complete all as specified and directed.
M&L rendering in patches in repairs (n.exc 3 Sqm each patch) 10mm thick in cement mortar 1:4 on fair faces of Brick/stone/concrete surfaces finshing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for Rough cast plaster on exterior walls applying the under coat of cement and sand morrtar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed.
M&L washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed.
M&L forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved patern using wooden/aluminium batten all as specified and directed.
M&L preparation of newly plasterd surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M&L complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforsecent salt, trading oil grees spots etc using grinding machine on wall surfaces and preparation of old plastered wall surfaces and applying two coats of oil emulsion distemper (OBD) of approved shed/tint over and including a coat of white wall care putty 2mm thick complete over a coat of primer.
M&L preparation of new plastered surface of ceiling and applying three coat of white wsash complete all as specified and directed.
M&L preparation of old surface of ceiling and applying two coat of white wsash complete all as specified and directed.
M&L preparation of newly plasterd surface of wall and applying two coats exterior emulsion weather coat (Apex) over a coat of putty complete all as specified and directed.
M&L complete removal of existing surfaces of wall by brooming down/scrapping, rubbing/washing including cornices, pilasters etc and applying two coat of weather proof exterior paint (Apex paint) of approved shade/ tint over and including a coat of putty complete all as specified & as directed. Note : Contractor should deposit full quantities of approved weather coat exterior emulsion paint (sealed pack) to AGE B/R-II store before start the work.
M&L preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces complete all as specified and as directed.
M&L preparation of old painted surface of brick/ concrete / stone surface over 10 cm in width or girth and applying two coat of plastic emulsion paint complete all as specified and as directed.
Taking down carefully existing bitumen tarfelt including plaster of any description over the surfaces of roof, terraces including flashing and junction of parapets/ curve walls etc and removing of the rubbish and deposting where directed complete all as specified and directed.
M&L rendeing 15mm thick in CM 1:4 on fair faces of concrete/ brick surfaces with water proofing compound @ 3% by wt of cement finished even and smooth in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane finished complete all as specified. (Polymeric membrane and WPC shall be meausred and paid seperately here-in-after).
Supply only water proofing compound.
M&L water proofing treatement to RCC roof slab including parapet comprising of following course of treatement/specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per sqm over plastered surfaces of roof including parapet surfaces. (b) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick weight not less 3.5 Kgs/Sqm and upper side of membrane thermally insulated with white mineral gravel finish over andincluding bituminous hot bitumen 85/25 & uniformly embeded during manufacturing process shall only be used & joints shall be sealed properly by torch application side overlap should be 75mm and end shall be 100mm. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside parapet in groove. The same shall be finished by a membrane flashing.
M&L water proofing treatment by water proofing liquid of Tech force 2K strong of Dr Fixit rain coat (colour as approved by AGE/GE) after complete removal of existing surface by rubbing/washing/cleaning and making the surface dust free, smooth and even applying a coat of weather base putty and applying first coat (by brush only) @4-4.5 Sqm/ltr, allowing it to dry for 24 hrs and applying the second coat over it on horizontal and vertical surface all as specified and directed. Note :-Application shall be carried out through authorised applicator of manufacturer only and as per guidelines of manufacturer strictly. The item will operated above 25' height ground level (over roof surface of DOME) necessary scaffolding and safety measures should be taken by the Contractor on his own arrangements. No extra payment will be paid on this account. Contractor shall deposit full quantites of materials (approved colour rain coat, sealed pack) to AGE B/R-II store before start the work.
S&F PVC (SWR) pipes of 110mm bore single socketed in any length fixed to wall incl taking out old u/s PVC/CI pipe with fittings complete all as specified and as directed.
S&F PVC (SWR) bend 110 mm bore of any radius complete all as specified and as directed.
S&F in repair 110 mm stack clamp out of 50mmx 5 mm flat iron and 16 mm dia round iron stays incl bolts and nuts and securing ends of stays to walls or roof etc, complete all as specified and directed.
M&L machine cut kota stone flooring 18 to 20 mm thick over and including cement sreed bed 1:6, 15mm thick laid and jointed in grey cement slurry mixed with pigment to match the shed of the slab including rubbing polishing complete all as specified and as directed.
All as per ser item No 28.00 above but as in skirting over rendering 10mm thick cement mortar 1:4.
M&L vetrified ceramic tiles light shed 10mm thick (square/rectangular)polished area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in colour cement to match including cement morter screed bed 1:6, 15mm thick complete all as specified and directed.
All as per ser item No 30.00 above but in skirting and dado including rendering/screeding including cement mortar1:4, 10mm thick.
M&L non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 in floors etc. laid over 15 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile Complete all as specified and directed.
M&L glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick over and including 10mm rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile Complete all as specified and directed. complete all as specified & directed.
Dismantling wall and any type of ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness fixed to any type of frame including cover fillets complete all as specified.
M&L wall panelling made of 5mm thick prelaminated PVC hollow section with tongued and groove joints fixed on wall with necessary screw and adhesive complete all as specified and directed by engr in charge . PVC U channel will be provied on top and bottom and PVC angle will be provided in all corners of complete al as specified and directed consisting of 5mm thick wood grain printed PVC sheet inclusive of solvant cement complete all as specified.
S&F granite (of any type) work 15-18mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like (including cutting for fixing of WHB, sink etc) in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
S&F repair vitreous china wash hand basin (under counter) white of size 550mm x 440mm (oval type) fixed in granite including 32mm dia CP brass waste coupling fitting and union complete all as specified and as directed Note: Pillar tap shall be measured as supply only under respective item.
S&F high density polythelene pipe (HDPE) of 32mm, pressure rating 6 Kgf/cm2 fixed to ceiling, floor etc complete all as specified and directed.
S&F in repair 15mm dia bore stop /angle valves cast copper alloy chromium plated with long shank complete all as specified and as directed.
S&F repair chromium plated cast copper alloy with crutch and butterfly handle fancy type bib tap (Long Body) & cup 15mm dia bore complete all as specified and as directed.
S&F PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed.
S&F in repair 15mm dia bore cast copper alloy chromium plated fancy type pillar tap(Swan Neck) for with out cold & hot water complete all specified and as directed.
Taking down chowkhat with shutter without taking off shutte from the frame n exc 1.5 Sqm each.
Taking down chowkhat with shutter without taking off shutte from the frame exc 1.5 Sqm and not exc 4 Sqm each.
S&F solid PVC door frames of size 50mmx47m made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet and edges will be painted to match wth printed sheet reinforced with MS Square tube supplying & fixing in opening as per specification and drawing.
S&F factory made moulded PVC door shutter 28-30mm thick (style) with 2,4,or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2 mm plain colourprelaminated PVC sheet on the back face, supplying & fixing in frame at site as per specification & drawing.
S&F 150mm size aluminium handles, cast type, anodised and fixed of approved make & ISI marked complete all as specified and as directed.
S&F aluminium anodised barrel tower bolt of extruded section of 200mm size complete all as specified and as directed.
S&F 100mm mideum weight butt hinges (type C-21) extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified and as directed.
S&F powder coated anodised aluminium freame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F powder coated anodised aluminium door shutter, aluminium section weighning 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door hinges anodised aluminium snap beading screws etc complete all as specified and directed.
S&F 5mm thick sheet glass ordinary quality in square exc 0.5 sqm each pane complete all as specified and as directed.
S&F in repair door closer hydraucally regulated aluminium (extruded section body) designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.
M&L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stailess steel cover governing pivot made of brass , other parts made of mild steel heavy duty and fixed complete all as specified and directed.
M&L taking down and removal of loose / disintegrated old concrete up to 50mm depth/ plaster of ceiling/ chajjas / projection etc and cleaning all loose dust washing with water and applying bonding coat nito bond AR or equivalent of modified styrene butadiene emulsion (SBR Bonding agent by volume with the brushes etc to bind New Cement plaster/ polymer Modified plaster/ concrete/ screed concrete with old surface etc complete.
M&L applying 15mm thick plaster with polymer modified mortar fortified with SBR (Nitobond SBR 45 ) in proportion 1:3 by weight 5 litres Nit bond SBR 45 to added to 50 Kg cement with 13 litre water addition, finished surface to match with existing adjoining surface of ceiling, beams and alike complete. Note : Necessary scaffolding and safety measures should be taken by the Contractor on his own arrangements being the items will operated height more than 20' (ceiling of dome). No extra payment will be paid on this account.
M&L and applying two or more coats of 2 component zinc based epoxy rust preventer (Nitozinc Primer-M) on corroded reinforcement after cleaning and removing the rust from corroded reinforcement with the help of wire brush and treating it with rust remover (Reebaklens RR) including thoroughly cleaning washing air blowing brushing etc complete. Note : Qty of Zinc based epoxy rust prevent or only shall be taken into account for payment purpose on the basis of actual consumption.
M&L providing precast cement concrete louvers and jalies 25mm thick (measured solid) including all mouldings but excluding frame complete all as directed. (Precast frame shall be measured and paid for separately under respective item.
M&L providing precast cement concrete (1:2:4) type B1, using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span,cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapits and railings upto 60cm in height, copings kneelers, apex stones, bed plates, kerbs, water throughs and the like including weathering slightly rounded or chamfered angles and throating as directed.
S&F 1000 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm float valeve 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting and including dismantling of tank complete all as specified and as directed.
Disconnecting existing PVC water tank (1000 ltr) setting aside (or lowering if required ) for repair , cleaning etc and hoisting if required reconnecting and refixing in position in position complete all as specified and as directed.
S&F in repair ball valve with high pressure (PTMT) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm 210 gm complete all as specified and as directed.
S&F in repair 25mm bore Gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.
Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore complete all as specified and as directed.
Taking down or up steel tubing and connection inculding cleaning for refixing or removal to store 25mm bore complete all as specified and as directed.
S&F jointing and testing 15mm dia bore galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings including cutting through wall floor etc complete all as specified and as directed.
Refixing old steel tubing and connection in new or old position (Walls, ceiling, floor etc) bore of pipe in 15mm dia complete all as specified and as directed.
S&F jointing and testing 25 mm dia bore galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings for the following sizes including cutting through wall floor etc complete all as specified and as directed.
Refixing old steel tubing and connection in new or old position (walls, ceiling, floor etc) bore of pipe in 25mm dia complete all as specified and as directed.
S&F 3mm thick sheet glass ordinary quality fixed with oil putty to metal frame including hacking out old broken glass (in any description) from metal frame complete all as specified and directed.
M/s S Amarjit Singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .