Work of Installation of additional 250 KVA Distribution Transformer and laying of related line at different places in Naubasta Division under the area of E.U.D.C.-III KESCo. Kanpur

Electrical Items :

Erection of double pole structure including fixing of top channel, fuse set on fuse set channel etc. as per standard specifications.

Erection of single pole including all fitting

Grouting of pole with Cement, Brick Ballast and Coarse sand as per standard specification.

Making plinth of S.T. HT/LT pole of 400mm dia, 600mm height (200mm Underground) with C.C. in ratio 1:4:8 of cement, stone ballast and coarse sand including cost of materials

Painting of S.T. Poles after rubbing, cleaning with emery paper and coating with one coat of Red Oxide on Full length of pole and then two coat of aluminum paint upto X-arm from Top/above fuse set including cost of paint and Red Oxide paint used should be I.S.I. Mark Ist Class Enamel Paint

L/C for laying of ABC (Size 120) for L.T. O/H Line

Stringing of Dog conductor

L/C for construction of Distribution Transformer Plinth 1.2x1.2x1.2 Mtr embedded with 4pcs.of Angle Iron 6.5x6.5x6.5mm 0.45mtr long solid with brick work 75mm thick C.C in ratio 1:4:8 with cement, coarse sand and stone blast.

L/C for Fabrication and erection of Transformer fencing of frame size 3x2.4mtr.of M.S Angle 40x5mm & M.S Flat 35x5mm and fixing of welded wire fabric 10SWG including painting two coats of paint on Iron Base surface with ready mixed paint to give bus green shade including cleaning by rubbing

Erection & Installation of T/F Complete with Crane

Erection of LT Cricket

L/C for connecting of constructed HT and LT network with Kesco mains including testing, commissioning and energisation of the same completely.

Carriage Charges (for All material of above work from KESCo Store to work site & Work Site to KESCo. Store. )

S.A. Enterprises

Shukla Enterprises