Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance 249 SHALIMAR SHAMLI | SHAMLI | SHAMLI | UTTAR PRADESH | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹5,700
Closing Date
7 Oct 2023, 11:00 amClosed
Superintending Engineer
S.E., EUDC-II, Noida. Sec-18 (Ansal)
33 KV Line Shifting Work
2023_PVVNL_844136_1
E-Tender No. 99/2023-24, EUDC-II, Noida.
Open Tender
Electrical Works
Item Rate
45 days
S.E., EUDC-II, Noida. Sec-18 (Ansal)
Attached in DOC
2 documents required · 2 mandatory
₹1,180
S.E., EUDC-II Noida
₹5,700
12 Oct 2023
28 Sept 2023
7 Oct 2023
28 Sept 2023
7 Oct 2023
28 Sept 2023
Amount
Safe carriage of following stock material, from any of the Store Center of PVVNL to work site including Loading from Store and safe unloading at site for Item No. 3 to 12
ST POLE 11 MTR LONG
Top Channel 125x65x3200mm
MS Angle 65x65x6mm Cross Bracing
33KV Disc Fitting Dog/Raccon
11 KV Disc Insulator with Fitting
11 KV Pin Insulator with Pin.
ACSR Dog Conductor
33KV XLPE Cable 3Cx300sqmm
33KV Termination Kit O/D suitable for 3Cx300sqmm XLPE Cable
33KV Cross Arm
Supply and Errection of the Following material for completing the works as per RESPO.
The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule. Double Pole Structures (a) ST - 11 Mtr. Long Pole
The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. Single Pole (a) 11M Long STP, SP-55 Round Pole
Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. Single Pole and Double Pole (a) 11M Long STP, SP-55 Round Pole
Laying, spreading, lifting and final sagging of 11/33 KV 3 phases ACSR Dog conductor in accordance with Line chart includidng binding and fixing of all accessories in 03Nos. Conductor in parallel as per site requirement.
Laying and commissiong of 33KV 3x300sqmm XLPE Cable Double Ckt. after digging trench of dia 220 mm in two parallel bores for Double Curcuit by manual method at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground level for laying cable and refilling of trench including connections at both ends after providing and crimping of lugs of proper size for completion of work and Providing & Laying of Ist Class Bricks, along the length on both side of 33 KV XLPE Cable in Cable Trench (minium 18No. Bricks/Mtr per Cable) and Stone Slab of size 450x600x50mm on top of the each Cable, Providing 150 thickness mm River sand for cushion beneath and 150mm above the cable and Back filling of excavated earth in the cable trench upto the ground level and ramming properly.
Preparation of 33 KV Power Cable ends: Making of 33 KV XLPE Heat shrinkable outdoor jointing kits suitable for 3x300 sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect.
Dismentaling of 01 No. STP, 02 Nos. Rail Pole & 196Kg. Old Conductor and all other line accessories from the Site and safe carriage of its from work site to any Store of PVVNL Discom including loading and unloading both ends.
Providing and Fixing of Stone Pad 300x30x75mm as per site requirement.
Providing and Driving of MS earth rod of size 20x2500 mm in earth and jointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballast in ration 1:4:8 in Block 600*600*300 mm with binding & nuzzling including providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor)
Providing and Fixing of Route Marks for Cable Lying as per site requirement.
Providing and Fixing of Number Plate with Clamp as per site requirement.
Providing and Fixing of Danger Board with Clamp and Nut & Bolt and Washer as per site requirement.
Providing & Wrapping of barbed wire (2.0Kg per Pole) on 33KV ST Poles SP-55/SP-72 as anti-climbing device for a length of 0.9Mtr. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a height of 2.75Mtr. from the ground, complete with providing and fixing of lower end & upper end clamps made of G.I.Flat 40x5mm complete with nuts&bolts.
Stay set complete (G.I.Stay rod 16x1800mm, Stay wire 5Kg, Guy insulator, G.I.Stay clamp, bolt, nut & wasther with concrete grouting) for 11KV line as per specification
Fixing, tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 11KV and Stay Clamps.
Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc.
Providing and Fixing of MS Nut & Bolts off size as per site requirement.
Providing and Painting of Poles by Aluminium Paint as per requirement.
Providing and Painting of Poles by Red Oxide Paint as per requirement.
Laying of 33KV, 3x300Sq.mm XLPE Cable in the air on cable Riser Double Pole, existing trench cable trench, nala x-ing & G.I.Pipe and making connection with 33KV over head line at both ends.
Fixing of Top Channel as per site requirement.
Fixing of MS Angle Cross Bracing as per site requirement.
Providing and Fixing of 6" Inch Dia GI Pipe as per site requirement.
Fixing of 33 KV Disc Fitting for Dog as per site requirement.
Fixing of 11 KV Disc Insulator with Fitting as per site requirement.
Fixing of 33 KV Pin Insulator with Pin as per site requirement.
Providing and Fixing of PG Clamp as per site requirement.
Providing and Fixing GI Pipe 6" inch Dia
Providing and Fixing of F Bracket as per site requirement.
Fixing of Cross Arm as per site requirement.
Providing and Fixing of Holding Clamp with Nut & Bolt as per site requirement.
M/s S S CONTRACTOR
M/S SHIVAM ELECTRICAL
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .