Construction of Govt. Community Health Centre at Shoghi Tehsil and District Shimla HP SH Providing 1 No. 13 person lift therein

Supply installation Testing and commissioning of 1No 13 passanger elevator with Machine Room with following specification and feature with one year defect liability period from the date of handing over the lift.

Load –Kgs: 884Kgs (13 Passenger)

Speed-MPS: 1 MPS

Travel (Max.): 22 Mts approx

Stops & Openings: 7 STOPS (All Openings on the Same Side)

Controller: ACD5-MR

Drive : VF Regenerative (Closed loop)

Power Supply: 400/415 Volts (3 phase 50 Hertz. Alternating Current)

Operation: full Collective operation

Car Group: One car (Simplex)

Machine: PM Gealess (located in shaft on top of guide rails )

Traction Media: Flat Coated Steel Belt

Car Finish :Rear mid Panel = Stainless Steel Honeycomb, Rare corner panels = power Coated paint,Front panel= Stainless Steel Honeycomb, Side Mid Panels= Stainless Steel Honeycomb, Side Corner Panels =power Coated paint

False Ceiling finish : Stainless Steel 4(hairline)/vandal proof finish or as per standard OEM

False ceiling type:CD-41/Hairline finish /vandal proof finish or as per standard OEM

Ventillation : Cross flow fan

Handrails: Handrails on rear car Panels or as per standard OEM

Flooring: marble/Vinyl tile/granite/ or as per the standard OEM

Car Door Finish :Stainless Steel Honeycomb

Landing Doors Finish :Stainless Steel Honeycomb or as per standard OEM

Fire Rated Doors: fire rating 120 mins

Pit Depth : 1350

Overhead : 4200

Hoistway dimension: 1700mm WX 2450mm D

Car Size: 1100 mm Wide x 2000 mm Deep x 2200 mm D

Car & Hoistway Door type : TELESCOPIC DOOR OPENING

Door opening: 900mm W X2000mm H

Door operator: DC Door operator

COP : COP for stops <= 12(950 mm) in Stainless Steel # 4 (hairline)

Car position indicator: Monochrome LCD - Blue Background & White Font bDot matrix (LED) Scorlling Display

Hall Fixtures: O2000 /Pan Type Fixture/or at par as per standard of OEM

Hall Fixtures Face Plate : Stainless Steel 4(hairline)

Hall button arrangement: LCD Monochrome type

Standard Feature Details: Anti-nuisance Car call protection, Independent Service (for Duplex only), Overload Device, Nudging,Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of Lobby & Parking, Door Open/Close Button, Manual Rescue Operation, Belt Inspection Drive, Auto Fan Cut Off, Emergency Firemen’s Service Automatic Rescue Operation , Voice Synthesizer, Intercom.

The prices of the complete job as per the specification above shall be inclusive of steel items,minor building work,scaffolding etc.All sundry fittings, assemblies, acessories, hardware item, foundation bolt, terminal lugs for electrical connection are required and item which are usefull and necessary for proper assembly and efficient working of various component shall be deemed to have been included in this job,weathersuch item are specifically mentioned in tender documents or not.

Standards and Rules:- a) IS:17900 (Part-1 to Part-5) b) Indian Electricity Rules 1956 c) Indian Electricity Act. 2003 d) HP Lift Act. 2007 e) HP Lift Rules 2009

Conditions:-

The work shall be carried out according to CPWD General Specifications.

The work shall be completed to the entire satisfaction of the Engineer-in-charge.

The firm will have to follow fair wage clause.

Sub-standard work will not be accepted.

No claim on account of fluctuation in prices due to any reason shall be considered.

The quantity can be increased or decreased as per actual requirement at site.

The conditional tenders shall not be accepted.

No premium will be allowed on M.R. Items, abatement, if any shall be applicable on all items

The contractor has to employ qualified Engineer for the supervision of work at site.

Any error or omission in nomenclature or unit can be corrected at any stage.

The quality of material shall be strictly in accordance with the specification given in DNIT.

All the material shall be inspected by the Engineer-in-charge of work before installation at site.

All the cable/ wire connections should be done through lugs / thimbles duly crimped with proper crimping tools & no extra payment shall be made on this account.

The department has reserve the right to issue any amendment to the work order as emergency demands or allow of altogether cancel the contract without assigning any reason. The department reserves the right to delete / add any item.

Discount offered by the firm should also be considered in deviation of items.

The extra/substitute items will not be allowed against this work.

Security shall be deducted on each running/ Final bill of the firm as per CPWD works manual.

The firm shall be quote the rates inclusive all the taxes/ GST whatever required and no extra payment shall be made in this respect.

The fittings/ material should be got inspected by the concerned AE with the representative of the firm and necessary certificate should be signed by the representative of the firm for its genuineness.

Any deviations to the clauses in the tender specifications must be clearly and separately indicated otherwise it shall be presumed that the offer is in line with requirements of tender.