AR MO of Inspection Hut at Salasi in Tehsil Distt Hamirpur HP

Repair of pot holes and removal of loose material, timming of sides cleaning of surface by providing tack coat using emulsion @ 0.30 Kg per sqm, 20mm thick pre-mix carpet and seal coat type B using VG-30 specification clause 1904.2,503 and 508.1 to the entire satisfaction of the Engineer-in-charge.

Rproviding and applying tack coat using bitumen emulsion conforming to IS:8887 using emulsion pressure distributer including preparing the surface & cleaning with mechanical to the entire satisfaction of the Engineer-in-charge.

Providing and laying 30mm Bitumenous concrete using crushed stone aggregates of specified gradingpremixed with bituminous binder and filler, transporting the hot mix to write by tripperslaying with paver finisher equiped with electronic sensor to the required grade level and alignment and rlling with smooth wheeled vibratory and tendom rollers to achieve the desired compaction and density as per sepcification to the entire satisfaction of the Engineer-in-charge.

Providing and laying seal coat of premixed fine aggregate (passing) 2.36mm and retained on 180 micron sieve with bitumen using 128 kg of bitumen of grade VG 10 bitumen per cum of fine aggregate and 0.6. cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete to the entire satisfaction of the Engineer-in-charge.

Providing and laying of hot applies thermoplastic compound 2.5mm (two point 5 milimeter ) thick including reflectorising glass beads @ 250gms per sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per drawings and technical specifications as per IRC 35. The finished surface to be lavel uniform and free from streks and holes complete including entire carriage of materials in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.