Replacement of old AC sheet with 0.6 mm thick galvalume sheet roofing, construction of 924 MT capacity temporary plinth, construction of one room office block and special repair work at SWH, Sirsa. (Dabwali road campus)

Amount

P/F CP brass angular stop cock 15mm dia Jaguar make model No. 39053 complete as per DNIT

Earth work non plastic or tibba sand under floors taken form outside of campus area with all lead and lift including loading, unloading, laid in 15 cm layer including ramming, watering, consolidating compaction and compensation of earth etc. complete in all respect as per the direction or engineer in charge. This includes construction of embankment and subgrade for road & parking area compacted to meet requirement of table 300-2 of MORTH specification clause No. 305. The finished road surface will be as per X-section approved by Engineer-in-charge with respect to GTS. Further it shall be ensured that atleast 300 mm of subgrade shall be constructed at each location. Wherever any cutting of existing subgrade is required on this account excavation as well as handling and disposal of earthwork to accommodate minimum 300mm thick subgrade shall be carried out by the agency at his own cost. Nothing extra will be paid on this account

P/F CP brass bib cock 15mm dia Jaguar make model No. 39307 complete as per DNIT

P/F gunmetal gate valve 3/4" dia complete as per DNIT

P/F PVC floor trap heavy complete as per DNIT.

Providing and fixing CP brass towel rail as per DNIT.

Providing and fixing looking mirror 500x400mm as per HSR.

Providing and fixing light weight CP brass Zali as per HSR.

Providing and fixing concertina coil of galvanised iron with angle iron "Y" shape complete as per DNIT

WBM 6” thick compacted using 63 to 45mm and 53 to 22.4mm stone metal laid in two layer complete in all respects as per PWD specification.

Supply & fixing welded mesh/monkey gates as per drawing and design of the Corporation complete as per DNIT.

P/L Dewatering system of C.C by vacuum vibrator surface trowel fix in complete as per DNIT.

Repair of steel shutters of godowns complete as per DNIT.

Removal of old AC sheet including ridges and wind ties & J hook complete as per DNIT

Providing and fixing Hi, Rib profiled sheets 0.60mm TT (Total Thickness) (only ± 0.2mm tolerance allowed) Hi Tensile galvalume/Zincalume steel sheet, the approved brand are TATA Blue Scope, Dong Bu Steel company limited (Korea), JSW steel limited and Bhushan Power and steel limited having a hot dip metallic Zinc-Aluminum alloy (AZ-150) coating of minimum (150 gms/Sqm) with 550 Mpa yield strength of approved blue colour (RAL-5012) the colour coating shall be as per IS 15965 of SMP or Super Durable Polyester Paint XRW fixed with hex head self-drilling screw sloping roof without curvature as per approved specification, drawing and design of the Corporation.

Supply and Fixing of Street Light 70 watt Crompton Make. (Havells/Crompton/Philips) complete as per DNIT

P/F of LED Bulb 15W complete as per DNIT (Havells and Philips, Syska)

P/F of LED tube light fitting 40 w 1X4’ with tube 40w(Havells/Philips complete as per DNIT)

S/E of ceiling fan 48” double ball bearing make (Havells,Fusion,Model/Areole new complete as per DNIT

S/E of exhaust fan 12” Fresh Air Heavy Duty (Havells,Crompton/Bajaj) complete as per DNIT

3- Pin Top-15 Amp (Anchor/SSK Make) complete as per DNIT

Bidder Name

Amount

Ms Shree Shyam Contstruction and Enggering

Naresh Jain

Ravinder Kumar Contractor

Ms Shree Shyam Contstruction and Enggering

Ravinder Kumar Contractor

Naresh Jain

Ravinder Kumar Contractor