REPAIR/MAINTENANCE TO DOORS, WINDOWS, VENTILATORS, CUPBOARDS, COMPOUND WALL, FOOTPATH, HARDSTANDING, INTERLOCKING, KERB STONE, MES INSTALLATION AT AF STN CHANDINAGAR UNDER AOR OF GE (AF) FARIDABAD

Amount

Taking down chowkats with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each and removing from site, complete all as specified and directed.

All as per item No 01 above but exc 1.5 sqm and n.exc 4.0 sqm each, complete all as specified and directed.

Taking down shutter of any description n.exc 1 sqm each, complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n.exc 2 sqm each, complete all as specified and directed.

S&F for 1.25mm thick, Pressed steel frame of size 105 x 60mm for doors, windows and ventilators etc, with one or more rebates including PCC 1:2:4 type B0 (12.5mm graded stone aggregate)as filling in hollow frame section and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F for 1.25mm thick, Pressed steel frame of size 125 x 60mm for doors , windows and ventilators etc, with one or more rebates including PCC 1:2:4 type B0 (12.5mm graded stone aggregate) as filling in hollow frame section and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F in repair for 30 mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge) ,minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws and stainless steel sliding door bolts and towel bolts and handles and necessary fitting, complete all as specified and directed.

S&F in repair for 30 mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain wiremesh/skelton door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, and all necessary fittings, complete all as specified and directed.

S&F in repair for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Clerestory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing in opening complete, solid PVC door frame, of size 50mm x 47mm, made out of 5mm one side prelaminated any colour PVC sheet reinforced with MS square tube, complete all as specified and directed.

S&F for 35mm thick, 2nd class hardwood Plain, framed panelled shutters(any No of panels) with panels of timber flat on both side (feather edged) or of veneered particle board, medium density wood particle board with commercial face veneers fixed to chowkats, complete all as specified and directed.

S&F for 30mm thick, 2nd class hardwood for glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as per SSR-Part-I Section-8, Clause 8.24 (a), complete all as specified and directed.

All as per item No 12 above but 25mm thick for window, ventilatators etc, complete all as specified and directed.

S&F for 30mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Supply and fixing for factory made solid panel PVC door shutter, 30mm thick(Style), consisting of frame made out of M.S. tube for top & bottom rails. MS frame shall be covered with heat moulded prelaminated decorative any colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated colour PVC sheet for top rail, Lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelaminated decorative colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixing in frame, complete all as specified and directed.

S&F 100mm long, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.

All as per item No 16 above but 75mm long.

S&F 200mm aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

All as per item No 18 above but 100 mm

All as per item No 18 above but 125 mm

S&F 125mm extruded aluminium handles, fabricated type anodised, complete all as specified and directed.

All as per item No 21 above but 100mm

S & F 250mm aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F Mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate, complete all as specified and directed.

Hacking out old broken glass panes (any thickness, size, quality or description ) from wooden frame fixed with oil putty or beads area not exc 0.5 Sqm each, complete all as specified and directed.

S&F 3mm thick, sheet glass, ordinary quality and glazing fixed with beading, complete all as specified and directed.

S&F 5.5 mm thick, ordinary quality and glazing with oil putty in square exceeding 0.50 sqm in each pane, complete all as specified and directed.

S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

Supply and fixing in repair, Harrison rails, 20 mm dia, mild steel, chromium plated, curtain rail fixing with brackets stops including knobs, brackete etc, complete all as specified and directed.

S&F Aluminium extruded body, door closer, hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and directed.

S&F in repair Aluminium alloy body and tongue and roller plate floor door stopper of 150mm size fixed with steel screws, complete all as specified and directed.

S&F 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

M&L for 12mm thick, PVC Prelaminated board, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work and fixed in repairs, complete all as specified and directed.

M&L for 18mm thick PVC Prelaminated , board, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work and fixed in repairs, complete all as specified and directed.

S&F for mild steel work for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc, complete all as specified and directed.

S&F windows/ ventilators, section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coated and section of shutter 47x20mm, mulion section 72x50mm ( Based steel as per IS 513 "D" qualilty galvanised as per IS 277 with zinc of 120 gms/sqm) glazed and gauged or wire gauge shutter prepare to receive wire mesh to the shutter (double bars powder coated fixed to window frame with screws including necessary fittings and all builders hardware such as handles, tower bolts and stays etc compelete all as specified and as directed.

S&F in repair Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

M&L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Supply and fixing anodised aluminium door shutters, aluminium section weighing 0.55 Kg/ RM including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and directed.

Supply and fixing for anodised aluminium window and ventilator shutters with aluminium grill, side hung type without sash bars, aluminium section weighing 0.55Kg/RM including necessary jointing cleats, glazing clips, rubber packing anodised aluminium snap beading, screws anodised aluminium fitting such as peg stay 150mm long (01no) hinges type B21, 100mm long (02 Nos) suitable handle (01 No), complete all as specified and directed.

Supply and fixing for anodised aluminium partition fixed type, without sash bars, aluminium section weighing 0.55kg/RM including necessary jointing cleats, glazing clips rubber packing anodised aluminium snap beading, screw etc, complete all as specified and directed.

Supply and fixing anodised aluminium frame for doors, windows ventilators with one or more rebates including jointing cleat for fixing etc, complete all as specified and directed.

Supply and fixing ordinary quality sheet glass, 5 mm thick, as in panels of aluminium door and window etc fixed with aluminium clip and rubber beading, size of each pane n.exc 0.5 sqm, complete all as specified and directed.

S&F steel ventilators with top hung shutter including projecting type hinges, steel peg stay ,complete all as specified and directed.

Supply and fixing in repair, continuous (piano) hinges, mild steel, bright finish or electrogalvanised 30mm flaps,complete all as specified and directed.

S&F floor spring double action hydraulically regulated made up of min 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty ISI Marked fixed in position, complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on concrete surfaces on roof finishing even and smooth without using extra cement and using water proofing compound, complete all as specified and directed. Note:- WPC shall be measured and paid separately

Supply only water proofing compound, complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces of walls, facia etc to be finished even and smooth without using extra cement,, complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6), complete all as specified and directed.

M&L for rendering 15 mm thick using ready mix plaster on brick / concrete surface of external/internal surfaces of walls finished fair and even, complete all as specified and directed. Note :- Contractor is required to deposit readymix plaster bags for 100% CA quantity to Engr -in-Charge.

M&L for preparation of old plastered or concrete surfaces of wall and applying two coats of weather coat/exterior emulsion, complete all as specified and directed.

Removing/cleaning of sand/silt, mud,etc under culvert and in the drain of any width and length in soft/loose soil including depositing of removed material from site at a distance exc 900 m and n.exc 1000 m deposited complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for 75mm thick, PCC 1:4:8 type D-2 (40mm graded stone aggregate ) as in sub base, complete all as specified and directed.

M&L for 40mm thick, PCC (1:2:4) type B1 using 20 mm graded stone aggregate finish by using extra cement as in flooring, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced), complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping/Benching including necessary from work and finishing of exposed surface, complete all as specified and directed.

Demolition of reinforced cement concrete of any descrption and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for 35 mm thick, precast ( 1:2:4 type B-0 using 12.50 mm gradded stone aggregate ) cement concrete jalli, including all mouldings set in cement mortar (1:4), complete all as specified and directed.

M&L for precast cement concrete (1:2:4 type B-1 with using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc). Chulah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar (1:4), complete all as specified and directed.

M & L for mild steel TMT bars 8-10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 75 mm thick plain cement concrete, 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in floors, paving etc, finishing the surface even and smooth with using extra cement and including use and waste of form work, complete all as specified and directed.

M&L for 60 mm thick precast cement concrete coloured interlocking tiles of grade M-35 any shape and size conforming to IS 15658-2006 with grey cement and pigment in floors / pavements including 30 mm thick sand cushioning, complete all as specified and directed.

M&L for coloured Chequered cement concrete glazed/glossy finished tiles of size 300x300x25 mm thick, with white cement and pigments, set, jointed and pointed in neat cement slurry in floors over and including screed bed 20 mm thick in cement mortar (1:6), complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed.

Dismantling posts or struts (Steel or RCC) any section embedded in concrete, brick work, masonry, etc including taking out embedded portion in concrete, brick work or masonry and making good to disturbed surfaces complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in for fixing angle iron and coping including necessary form work, complete all as specified and directed.

S&F mild steel work as in posts and struts in fencing including cutting tops to shaps as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc) embedded in concrete/mosnary complete duly tar painted and sanded the embedded portion of angle iron including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

M&L for providing and fixing concertina spiral coil fencing with punched tape concentrina coil 600 mm dia and 6 m max openable length, upto 3 m height of wall with angle iron 'Y' shaped with 9 horizontal RBT reinforced barbed wire studied with GI staples and GI clips to retain horizontal incl necessary bolts or GI barbed wire tied to angle iron, all complete as per direction of EIC, with reinforced barbed wire tape (RBT)/spring core (2.5 mm thick) wire of tensile strength of 165 kg/sqmm with tape (0.52mm thick) and weight 43.47 gm/m including taking down of old unserviceable concertina coil, complete all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc, complete all as specified and directed Note : Each line of wire shall be measured.

Supply only Chain link MS Galvanized fencing, any size or type complete all as specified and directed

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining blots, etc. including provision of binding wire. complete all as specified and directed.

M&L for Precast cement concrete, 1:2:4 type B-1 using 20mm graded stone aggregate, block for road side kerb stone as per sample approved by GE for road side kerb stone and for laying and setting in cement mortar (1:4) including demolition of old PCC kerb stone, complete all as specified and directed.

M&L for preparation of new or previously untreated plastered or concrete surfaces and applying two coats of weather coat over a coat of primer, complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting out all as specified and directed.

Returning, filling, including spreading levelling and well ramming in layers not exceeding 25cm apart, complete all as specified and directed.

Removing of surplus excavated soil to a distance not exceeding 50 Mtr from starting point and depositing where directed at a level not exceeding 1.5 Mtr above the starting point, complete all as specified and directed.

M&L for sand cushoning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches, complete all as specified and directed.

M&L for sub class `B` bricks for cable protection, complet all as specified and directed.

Taking down UNSV LT Under Ground cable of any size, complete all as specified and directed.

Supply, laying, connecting and testing XLPE underground cable insulated and overall sheathed with aluminium conductor heavy duty 1100 volts grade 50 sqmm 3.5 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc complete all as specified and directed. Note: (i) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways and Aluminium thimbles/lugs are including in the quoted rates. (ii) All equipments, machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.

All as per item No 90 above but for 3.5 core 120 Sqmm.

All as per item No 90 above but for 3.5 core 240 Sqmm.

Supply & fixing/laying in replacement HDPE (DWC) tubing 100 mm dia. of pressure rating 6Kgf/cm2 fixing on poles, walls under floors, laying on surface etc as requiredd at site and complete all as specified and directed. Note: All items and accessories , bend, joints, nut bolts, clamps etc are incl in quoted rates.

M&L in replacement of MCCB 800 A, breaking capacity 65 KA at 415 V, four pole adjustable thermal and adjustable magnetic settings with extended terminals and separator links complete including doing connections with bus bar and outgoing cables, nuts bolts washers complete all as specified and directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material, heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm, Indoor/Outdoor type, complete all as specified and directed.

All as item No 95 above but for cable of size 70 to 120 sq mm.

M&L in replacement for commissioning & testing ESE based lightining arrestor (Protected area 32 meter Radius on Level 1 and 77 meter Radius on Level III ) single spike complete with chemical earthing all connections and acceessories for a range of 25 mtrs complete all as specified and as directed.

S&F in replacement stranded copper conductor of size 70sqmm single core insulated flexible copper down conductor (cable) from Lightning arrester to Earthing properly fixed with saddles and on insulators, complete all as specified and directed.

M&L in replacement installtion of GI Mast with insulator and necessary accessories 5 Mtr height including all necessory civil and grouting works, nuts bolts washers, complete all as specified and directed.

S&F in replacement of Lightning Strike Counter (6 digit) including all connections, fixing on wall etc nuts bolts all as specified and as directed.

M&L for Chemical earthing, design, development, supply, commissioning and testing EHCC certified ground terminal earthing system, hollow tube solid bar CPRI tested for sensitive signal/Electrical equipments highly anti-corrosive long life severe wear conditions in the earth pit and of standard size ISI marked copper tube outside secondary conductor of 50mm dia and main primary conductor inside 25mm dia 3000mm length ready to install with suitable connecting terminal confirming to IS:3043 1987 specification highly conducive packing material to be filled in earth pits for providing uniform low resistivity anti-corrosive hygroscopic medium around the earth system for improving the efficiency of current dissipation 20 Kg per bag (3 bag per kit) min or sufficient quantities required as per site complete including PCC pits of inside dimension 0.5x0.5x0.5m and suitable cover, complete all as specified and directed. Note: (i) Rate of Earth work, Earthing electrode, all connections, nut-bolts, washers, complete labour, testing, Earth lead/strip upto 7.5 mtr, charcoal dust, common salt, porcelain insulator, PCC earth Pit, CI frame, RCC cover, funnel with wire mesh are including in quoted rate and watering pipe, earth lead protection pipe, test point and earth lead exceeding 7.5 mtr are measured and paid separately.

Supply and fixing in repair of Earth continuity strip or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or fixed on wall with porcelain insulator or any other indicated situation for loop earthing etc. as required Copper Strip 20x3 mm, complete all as specified and directed.

M&L for earthing complete with copper plate earth electrode 60cmx60cmx3.15mm thick surrounded by charcoal and salt buried directly in ground vertically in pit of depth not less then 2.25 mtr below ground level with top edge of the earth plate at depth of not less then 1.5 mtr below ground level surrounded from all sides by charcoal dust and common salt in alternate layers of 15 cm depth and earth plate electrode connected to copper earth lead strip of size 20X3.0 mm at two points by means of GI nuts bolts, check nuts and washers and connected to earthling test point drawn through 40 mm dia GI pipe for protection pipe and arrangement of watering pipe including PCC earth pit (1:3:6) type C-2 with CI frame and RCC cover all as shown in electrical Plate No 3 on SSR Part-I including testing and dismantling ,taking down old unser earthing, complete all as specified and directed. Note: (i) Rate of Earth work, Earthing electrode, all connections, nut-bolts, washers, complete labour, testing, Earth lead/strip upto 7.5 mtr, charcoal dust, common salt, porcelain insulator, PCC earth Pit, CI frame ,RCC cover, funnel with wire mesh are incl in quoted rate and watering pipe, earth lead protection pipe, test poit, and earth lead exceeding 7.5 mtr are measured and paid separately.

Supply and errection in true vertical position steel tubular swaged pole type 410 SP-31 , 09 mtr long complete with cast iron base plate and final tape plug, bolts, nuts, washers and screws including painting with two coats of synthetic enamelled aluminium paint over a coat of red oxide primer after errection and providing black and white strips with synthetic enamel point 30 cm each alternate upto 1.5 mtr above the coping of pole starting with black strip complete and marking pole number on pole, complete all as specified and as directed. Note: (i) Earth work and PCC shall be measured and paid separately. (ii) Description as per direction of Engr-in-Charge will be printed on each pole without any extra cost.

Supply and fixing stay assembly complete with all accessories, such as MS stay plate 230X230X6 mm, stay rod 215 cm long and 16 mm dia with nuts including GI bow turn buckle, GI stay wire, Loop type insulator etc. all as per electrical plate No 1 orr SSR part 1 and as directed incl taking down old U/S, complete all as specified and directed. Note:- Excavation and PCC work will be measured and paid separately.

Surface dressing in soft/loose soil not exceeding 15 cm deep, complete all as specified and directed.

M&L for Broken stone or boulders, hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick including spreading lime stone powder under stones, complete all as per direction of Engr-in-Charge.

Supply and fixing in replacement of Retro reflective sign board of size 900 mm X 1200 mm made of ACP sheet of 3 mm thick. ACP Sheet will be fixed on SS (Stainless Steel ) frame of with legs of Stainless steel (SS) on PCC 1:3:6 type, 2.10 m above the ground level and 750 mm below the ground level. The background of board to be provided with blue colour, letters and border with white retro reflective tape. Same description will be mentioned on both side of ACP Sheet.The size of letters and description will be as directed by Engr-in-charge, board will be complete fixing/grouting with nut/bolts/Anchor fastener with washers, complete all as specified and directed.

Supply and fixing in replacement of Retro reflective sign board of size 600mmx1800mm made of ACP sheet of 3 mm thick. ACP Sheet will be fixed on wall, the background of board to be provided with blue colour, letters and border with white retro reflective tape. Same description will be mentioned on one side of ACP Sheet. The size of letters and description will be as directed by Engr-in-charge, board will be fixed on Wall complete fixing/grouting with nut/bolts/Anchor fastener with washers, complete all as specified and directed by Engr-in-charge.

M&L for Repair and replacement of Maintenance free dry battery, 12 volt, 180 AH minimum warrranty of 36 Months including statndard accessories complete all as speciied and directed.

S&F in replacement of outdoor type LED flood light, 120 watt, fitting aesthetically designed for road lighting, having secondary optics with uniform distribution of light, pressure die cast aluminum housing powder coated in grey and toughened glass, IP 66 protection, class I with seperate driver and operating voltage range 120 to 270 V including suitable fixing arrangment complete all as specified and directed.

S&F in replacement of LED Street Light, Luminaries 70/ 75 watt, fitting aesthetically designed for road lighting, having secondary optics with uniform distribution of light, pressure die cast aluminum housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage range 120 to 270 V including LED driver, complete all as specified and directed.

S&F in replacement of LED Street Light, Luminaries 35/45 watt, fitting aesthetically designed for road lighting, having secondary optics with uniform distribution of light, pressure die cast aluminum housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage range 120 to 270 V including LED driver, complete all as specified and directed.

Supply and fixing in replacement of Mushroom shaped, decorative, LED bollard, with IP 65 protection and 9 watt capacity, warm white, 240 Volts AC, 50 Hz, including make proper connection complete including PCC, cutting , welding , drilling holes, nut bolts, washer, complete all as specified and directed.

Supply and fixing in replacement of cylindrical shaped (FLUTE) LED bollard with opal acrylic diffuser and IP 65 protection and 9 watt capacity, warm white , 240 Volts AC, 50 Hz, including make proper connection complete includingPCC, cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed.

Supply and fixing in replacement of 50mm dia. GI tubing 'medium grade' with all fittings complete laid in trenches / on walls / on ceiling / roof etc including necessary suitable size of MS clamps / saddling on walls / ceiling etc, including taking down old U/S existing GI tubing, complete all as specified and directed.

All as per item No 117 above but 25 mm dia.

All as per item No 117 above but 20 mm dia.

Supply, laying and testing in replacement of unserviceable for Ductile Iron pipes of 150 mm bore with spigot and socket ends centrifugal cast, class K-9 as per IS 8329 in any length suitable for and including rubber tightening joints laid in trenches, complete all as specified and as directed.

laxmi enterprises (BID ID -3304317)

36SHRI RADHEY ASSOCIATES (BID ID -3303661)

NAVEEN KUMAR TYAGI (BID ID -3303551)

M/s SHRI RADHEY BUILDERS (BID ID -3304038)

Singh Associates (BID ID -3309892)

High Tech Metal India (BID ID -3304022)