Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.7 LAccepted-Finance 167 2 ROY BAHADUR ROAD KOLKATA 700 034 W B | KOLKATA | KOLKATA | WEST BENGAL | 700034 | L1 | Accepted-Finance ACCEPTED | |
| 2 | L2₹12.7 L+₹5,521.61 (0.44%)Rejected-Finance B 11 1 KALYANI NADIA 741235 | KALYANI | NADIA | WEST BENGAL | 741235 | L2 | Rejected-Finance REJECTED | |
| 3 | L3₹12.9 L+₹22,856.34 (1.80%)Rejected-Finance 18 SANKAR BOSE ROAD KOLKATA | L3 | Rejected-Finance REJECTED |
Tender Value
Refer Docs
EMD Value
₹26,500
Closing Date
2 Jun 2025, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER, BOLPUR MECHANICAL DIVISION PHE
SRINIKETAN ROAD NEAR HOTEL MARK MEADOWS PO SRINIKETAN DIST BIRBHUM PIN 731236
Providing and Installation of Voltage Correction device at newly sunk Tube Well No- I and II sites and allieds works at Dhakhalbati (Zone-2 and 3) PWSS, Block-Rampurhat-II under Bolpur Mechanical Division PHED
2025_PHED_837130_1
PHED/04/EE/BOLMD/25-26
Open Tender
MECHANICAL
Item Rate
30 days
DAKHALBATI, RAMPURHAT BIRBHUM
Please refer Tender documents.
5 documents required · 5 mandatory
₹26,500
7 Jul 2026
21 Apr 2025
4 Jun 2025
22 Apr 2025
2 Jun 2025
22 Apr 2025
Amount
Supply and delivery at site of GRP street light pole conical type 7 mtr. Length with base plate at bottom & internal junction box (6A,SP MCB & 4-way Connector )resin coated. A) Single arm pole. (For Both Zone-2 & 3 sites) [Make: Fibro Plastichem/EPP/PHED Approved]
Supply and delivery at site of energy efficient LED Smart Bright street light fixture with IP66 and IK06 protected LM high pressure alluminium di cast housing with polycarbonate cover capable of delivery standard lumen output as follows .The lens plate should be bolted to the metal core PCB should not be glued . The driving current should be more than 700 mA . It should have internal surge protection of minium 4kv , lumen /watt >100, Drivier efficiency > 85% ,PF >0.95, THD<10% . [ BRP033 LED90 CW SLR GR PSU SPD ] [Make: Philips/PHED Approved]
Supply and delivery at site of 1.1 KV grade 2 core 6 sq.mm XLPE insulated Al. Ar. Cable Conforming to IS:7098(Part-I) 1988 for outdoor lighting along with manufactures test certificate. [Make:Gloster/Havells/Polycab/PHED Approved]Supply of cable as per actual requirement at site.
Erection of GRP pole of length of 7 meter in RCC(1:2:4) foundation of 400x400mm of depth of 1300 mm below GL and 200 mm just above GL. 4 nos "J" type foundation bolt of 20 mm dia and 600 mm long grouted into RCC foundation as per base plate of pole.Projected length of 100 mm also considered for fitting with the base plate of the pole.There should be a provision of two number flexible pvc pipe of 63mm dia for cable entry as per supplied drawing.Also the foundation along material will be made as per departmental drawing and design.
Laying of cable upto 2 core 4 sq.mm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.
Laying of one No. cable up to 35 sq.mm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.
Fitting fixing above supplied LED light fitting complete with all accessories to be fixed with S&F length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required complete.
Earthing with 1no. Of G.I. earth spike (20 mm dia. X 1.5 mtr. Long) driven into the ground upto 2 mtr.. drawing earth line with separate 6 SWG G.I. Wires providing 15 mm dia. G.I. pipe protection from earth spike feeder box/junction box/poles and fixing to the same by suitable nuts & bolts all complete as per direction of EIC.
Supply and delivery of 16 amp 240V rewireable type switch fuse unit.Make-Approved make
Fixing only above supplied Sheet Steel Main Switch (Rewirwable type) on Flat Iron Frame/Angle Iron Frame on wall).
Supplying and fixing 2 Way MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment.
Supplying and fixing (06-32A SPN) 415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection
Installation of above supplied Stabilizer by supplying all required materials with socket, gland, fittings etc. by skilled technical personnel as per requirement with making double eathing arrangement of the stabilizer in complaince with IE rules by G.I pipe electrode of 50mm dia 3mtr. long of 2 nos quantity by suitable GI strip / bar with all other accessories reuired to complete the work as per direction of EIC with commissioning earthing building.[For PH No - I & II] [N.B: (1) Pump data is to be confirmed with the yeild test report of the tube well. (2) Third party inspection of the work is mandatory as per guidelines of NJJM and direction of EIC without any extra cost. (3) Drawing, design and make of the materials are to be approved from the EIC before procurement.]
Add: GST @ 18% on sum of Item No: 1.00 to 14.00
Add: Cess @1% on sum of Item No. 1.00 to 15.00
M/S. DILIP MITRA (BID ID -6454456)
M S ENTERPRISE (BID ID -6456644)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
cancelled_1.pdf
pdf • 0.07 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .