SPECIAL REPAIR OF BLDG NO P-257 IN KLP-II AT FAZILKA MIL STN

Taking down chowkats or frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified and directed by Engineer - in-Charge.

Taking down chowkats with shutters (without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm) removing to store all as specified and directed by Engineer - in-Charge.

Taking down shutter of any description exc 1 sqm and n exc 2.00 sqm each complete all as specified and directed by Engineer-in-Charge.

Refixing of shutter in other opening of any description exc 1 sqm and n exc 2.00 sqm each all as specified and directed by Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. Note : Stainless steel butt hinges and necessary S.S. screws shall be deemed to be inclusive in unit rate quoted of this item.

Providing and fixing 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type skeleton door shutter open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, mesh etc.; and comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per direction of Engineer-in- Charge. Note : Stainless steel butt hinges and necessary S.S. screws shall be deemed to be inclusive in unit rate quoted of this item.

Providing and fixing factory made uPVC white colour casement (openable) window (outward /inward opening) with hinge system, comprising one outer openable shutter glazed with 6 mm thick selected quality toughened glass and one inner openable shutter fitted with stainless steel wire mesh, both fitted in a panel of single common frame, complete all as specified and as directed. The window shall be manufactured from extruded uPVC profiles having wall thickness of 2.3 mm (±0.2 mm) with multi-chamber hollow sections. Frame size shall be 88 mm × 60 mm, sash 60 mm × 73 mm, vertical T-profile (one vertical member between two shutters to divide the opening into two panels) 74 mm × 88 mm, and glazing bead 35 mm × 20 mm. All profiles shall be mitre cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water. EPDM gasket of 1.2 mm (±0.2 mm) thickness shall be provided. Galvanized steel reinforcement shall be inserted in the profiles as required, viz. frame, sash and T-profile of suitable size matching the respective uPVC profiles. The frame shall be fixed to the wall using 8 mm × 100 mm long fasteners. Hardware shall include zinc alloy white powder coated casement handles, zinc alloy white powder coated butt hinges, mild steel transmission gear with multi-point locking system, and suitable locking handles for inner wire mesh shutters. Necessary accessories, fasteners and all fittings required for proper functioning of all four shutters (two glass outer + two mesh inner) shall be included. The stainless steel wire mesh (SS-304) and 6 mm toughened glass shall be measured and paid along with this item. The work shall be completed in accordance with approved drawings, specifications, and directions of Engineer-in-Charge. Payment shall be made on the basis of net opening area measured in square metres. Note : Rate quoted shall include frame, sash, T-profile, hardware, EPDM gasket, installation, fixing, accessories, SS wire mesh, and 6 mm toughened glass, all complete.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life).