REPAIR AND MAINT OF FOCUS LIGHTS EXTERNAL LIGHT SECURITY LIGHTS HIGH MAST AND ALLIED WORKS AT NDA KHADAKWASLA

Amount

Disconnecting and taking down 08x250 watt /400 watt MH flood lights of any type and brand from Highmast light pole of any height using electrically/manually operated and replacing with new 8 Nos x200 watt LED flood light luminaire with 08 Nos driver assemble box for each fittings made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 with suitable fixing arrangements as per existing highmast for flood lights and driver assemble box complete all as specified (Location: Trishakti gate-01,No-1 Bn-01,No 2 Bn -01,No 3 Bn -01, No-4 Bn 02, No5 Bn-03, D3 16 Md Accn-01,D3 Circle-01, ETT-02, Peacock Bay-01, MH-01, Follower Qtrs-02, NDA Mandir-01) Note: (i) Separate assemble box should be provided for weight balance. (ii) Quoted rate shall including for 08 Nos new fittings and driver assemble box. (iii) Quoted rate shall be including suitable control wiring for each fittings.

Disconnecting and taking down 04x 1000 watt/ 400 watt MH flood lights of any type and brand from Highmast light pole of any height using electrically/manually operated and replacing with new 4x400 watt LED flood light luminaire with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 and 08 Nos driver assemble box for 4 flood lights made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 with suitable fixing arrangements as per existing highmast for flood lights and driver assemble box complete all as specified and directed. Note: (i) Separate assemble box should be provided for weight balance. (ii) Quoted rate shall including for 08 Nos new fittings and driver assemble box. (iii) Quoted rate shall be including suitable control wiring for each fittings.

Disconnecting electric connection and taking down carefully Fractional motor from highmast housing of any type and capacity as described below: -removing the burnt winding of motor rewinding with super enarneled copper winding wire of suitable gauge or of matching size to the exisiting wires including all insulating material such as insulation paper sleeve, tape, varnishing etc and reassembling, testing, transporting back to site and refixing to original position all as directed.

Dismantling / taking down the pole of 16 mtr height high mast light by engaging suitable crane and repairing by replacing all the unseviceable parts such as steel wire, power cable and servicing and greasing the gear wheel assembly and housing, refixing and connecting up complete all as specified and directed. Note: 1)The items such as steel wire, power cable are measured and paid separately. 2) The entire work shall be carried out with well experienced professionals who undertake the high mast poles dismantling/ repair works 3) Minor parts such as nuts/bolts/screws/greasing /servicing etc shall be provided by the contractor with out any extra cost over and above the quoted rate.

Supply only stainless steel rope twisted of size10mm/6 mm dia with necessary connections proper binding on both sides from bottom drum mast top connecting hook including taking down old unsv one complete all as specified and directed.

Supply & Laying, jointing & testing of UG LT cables XLPE insulated, PVC sheathed aluminium conductor multi stranded armoured heavy duty 1100 Volt grade cross sectional area 10 sqmm 4core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs of cable size all as specified and directed

Supply & Laying, jointing & testing of UG LT cables XLPE insulated, PVC sheathed aluminium conductor multi stranded armoured heavy duty 1100 Volt grade cross sectional area 16 sqmm 4core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs of cable size all as specified and directed

S & F PVC insulated copper conductor 4 core 10 Sqmm for connection from panel to high mast fitting multistranded with suitable lugs complete all as specified and directed

Supply and fix SMC junction box of size 295mm x 195 mm x 100 mm size with connector for connecting incomming and outgoing of cable including 01 No of MCB DP 06 Amps to control the pole light circuit and MS brackets made out of 32 x 4 mm flats for fixing the box on post complete with nuts, bolts and wahers and suitable size of double compression cable glands for incomming, outgoing of cable and incl 04 nos aluminium busbar rating 100 Amps. Complete all as specified and directed.

Excavation in trenches in hard/dense soil n. exc 1.5 m wide and n.exc 1.5 m in depth and getting out complete all as specified and directed by Engineer-in-charge.

Returning filling in including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and directed by Engineer-in-charge.

Removing excavated surplus soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above starting points complete all as specified and directed by Engineer-in-charge.

M&L for laying of half round reinforced concrete pipe, of dia 100 mm, half round for bottom and half round for top. an before laying excavated area shall be levelled. complete all specified and directed. Note : 01 Half round top and 01 half round bottom together will be considered as one running meter.

Sypply and fix 40 OD mm 3 layer PP-R polypropylene random copolymer bore pipes SDR 7.4 (PN-16) UV stabilised and antimicrobial fusion welded having thermal stability for cable protection PP-R plain and brass threaded polypropylene random fitting (ISI Marked) laid in trtenches incl union, elbow etc .complete all as specified and directed.

Cutting tarmac bituminised road by using suitable hydraulic road cutter for a width not exeeding 300 mm and depth 600 mm for removing laying of pipe line including refiiling and making good with tarmac/ PCC(1:3:6 type C1) duly matching with the sorroundings all as directed

Suply & fixing in replacement of 200 watt LED flood light luminaire with driver assemble box made in pressure die cast housing and heat sink in aluminium extrusion and IP 66, with suitable fixing arrangements as per site requirement. Note: Ladders/Cranes shall be used and will be provided by contractor for dismanting/fixing of light fittings at chamak and cost for the same is deemed to be included.

Suply & fixing in replacement of 160 watt LED flood light luminaire with driver assemble box made in pressure die cast housing and heat sink in aluminium extrusion and IP 66, with suitable fixing arrangements as per site requirement. Note: Ladders/Cranes shall be used and will be provided by contractor for dismanting/fixing of light fittings at chamak and cost for the same is deemed to be included.

S&F PVC insulated & sheathed stranded copper conductor cable of size 2.5 Sqmm 3 core

S&F in replacement LED 90 watt street light fiitting made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP 66 protection incl complete fixing to pole/wall with necessary nut, bolts and washers complete all as specified and directed. Note: Ladders/Cranes shall be used and will be provided by contractor for dismanting/fixing of light fittings at chamak and cost for the same is deemed to be included.

KESARI AND SONS

Tejas Enterprises

SONU ENTERPRISES

SHAILENDRA B TULSANI

Mechelecs Engineers

MAHIMA CONSTRUCTION

Mehta and Co.

Sparkh Electricals & Works

Horizon Construction