Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.9 LAccepted-AOC H NO 1990 4 GALI NO 5 RAJENDER COLONY ROHTAK HARYANA 124001 | ROHTAK | ROHTAK | HARYANA | 124001 | ₹17.9 L | L1 | Accepted-AOC LOA issued |
| 2 | L2₹18.5 L+₹55,209 (3.08%)Rejected-Finance 685 G F PANA SAKTAN NEAR DADA BHAIYA MANDIR BAWANA DELHI 110039 | DELHI | BAWANA | DELHI | 110039 | ₹18.5 L+₹55,209 (3.08%) | L2 | Rejected-Finance L2 |
| 3 | Rejected-Technical | - | - | Rejected-Technical Not Eligible |
| Sl No | Description | Qty | Unit | bharti airconditioning co. L2 | M/S ANSHI ENTERPRISES L1 |
|---|---|---|---|---|---|
| 1.00 | [23.22.1.10]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.10. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 125 to 160 amp, 25 KA [Through Rate] | 1 | Each | 13,888 ₹13,888 | 11,284 ₹11,284 Lowest |
| 2.00 | [23.22.2.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 2.2. MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 250 A FP [Through Rate] | 1 | Each | 19,678 ₹19,678 | 16,000 ₹16,000 Lowest |
| 3.00 | [24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate] | 1 | Each | 4,500 ₹4,500 | 3,500 ₹3,500 Lowest |
| 4.00 | [24.1.13]EARTHING AND LIGHTENING ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required. [Through Rate] | 120 | Metre | 150 ₹18,000 | 140 ₹16,800 Lowest |
| 5.00 | [24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate] | 1 | Each | 5,500 ₹5,500 | 4,500 ₹4,500 Lowest |
| 6.00 | [24.14.32]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 32. 25 Sq mm 4 core (Arm.) [Through Rate] | 110 | Metre | 296 ₹32,560 | 240 ₹26,400 Lowest |
| 7.00 | [24.2.8.5]LT CABLE 8.5. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 25 sqmm [Through Rate] | 12 | Each | 500 ₹6,000 | 250 ₹3,000 Lowest |
| 8.00 | Supply and Erection of air cooled variable refrigerant flow module type cooling application, each comprising of energy efficient multiple scroll compressors, full charge of R-410a refrigerant gas and all accessories as per the specifications. All compressors shall be inverter type . The condensing units shall be suitable for operation on 415 plus 10% volts, 50Hz, 3 phase ac power supply and complete with auto check function of connection error, auto, address setting. etc. the outdoor units shall be low noise type. The outdoor units shall be of following capacities: ( Carrier midea, Hitachi, voltas)
ODU 20 HP | 2 | Each | 3,46,000 ₹6,92,000 Lowest | 3,50,164 ₹7,00,328 |
| 9.00 | `Air handling unit (Floor mounted ) - Exposed tpe floor mounted air hanling units, Supply, installtion, testing, commissioning of factory fabricated outdoor tyoe double skined air handling unit horizontal type with fabricated out of extrucded aluminum (1.6 mm thickness min) Section with thermal break profile at corner and at joints for double skin air handling unit along with internal covrings with mixing chamber with 0.63 mm thick pre-plasticide galvanised sheet outside and 0.63mm thick polished stainless steel sheet inside with backward curved direct driven plug type in supply and exhaust side with fan section with fan motor with IE2 rating and suitable for 415 plus 10% , 3 phase , 50hz, 4 RD Cooling coil with coil section, pre-filter ( EU-4) Section with non wovem synthetic washable media of 10u ( micron) particle size with an efficiency of 90% before cooling coil . The polished strainless steel srain pan of 1.2mm thick duly insulated with 13mm thick nitrile rubber under cooling shall be provided . motor and belt drive package /direct driven arrangement , belt guard etc. for belt driven blower without face and bypass dampers. The AHU shall be insulated with 48 plus 2 mm thick injected fire retardent PUF of density 40 plus 2 kg/m3. The motor and fan assembly shall be mounted on aluminum extructed section. Marine light with limit switch shall be provided. The complete AHU shall conform to standard spec. The face velocity across cooling, filters should not exceed 500 FRM. AHU kit to be included for installation. The capacities of air handling shall be as follows. (13 TR Capacity with 4 row deep copper cooling coils) as per AHRI / Eurovent certifies The Air handling units (AHUs) shall be of follwings duty parameters : Supply of quantity: 5500 CFM,
Static pressure: 50mm WG, Refrigeration load: 13 TR (Peak), Cooling coil : 4 Rows deep, Humidity: 60-70%`
Make Geco/ Edgetech/ GEC | 2 | Each | 2,85,000 ₹5,70,000 | 2,81,520 ₹5,63,040 Lowest |
| 10.00 | Supply and installation of Digital type diffrential pressure sensor. Quoted price shall be inclusive of all necessary arrangement required for installation of hang on wall/ door | 1 | Each | 12,500 ₹12,500 Lowest | 12,500 ₹12,500 Lowest |
Tender Value
₹18.5 L
EMD Value
₹37,000
Closing Date
12 Sept 2025, 2:00 pmClosed
VISHWNATH KHICHI
ED - Karnal
Providing Air Handling Unit with AC for ICU (12 Beds) in Civil Hospital Distt. Sonipat Recall
2025_HRY_470171_1
2025096F80D4 E23A 436B B86E F50D02E2CD1C665BAR
Open Tender
Electrical Works
Works
90 days
Sonepat
2 documents required · 2 mandatory
₹1,000
₹37,000
Yes
9 Oct 2025
5 Sept 2025
12 Sept 2025
5 Sept 2025
12 Sept 2025
5 Sept 2025
Amount
[23.22.1.10]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.10. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 125 to 160 amp, 25 KA [Through Rate]
[23.22.2.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 2.2. MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 250 A FP [Through Rate]
[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate]
[24.1.13]EARTHING AND LIGHTENING ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required. [Through Rate]
[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate]
[24.14.32]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 32. 25 Sq mm 4 core (Arm.) [Through Rate]
[24.2.8.5]LT CABLE 8.5. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 25 sqmm [Through Rate]
Supply and Erection of air cooled variable refrigerant flow module type cooling application, each comprising of energy efficient multiple scroll compressors, full charge of R-410a refrigerant gas and all accessories as per the specifications. All compressors shall be inverter type . The condensing units shall be suitable for operation on 415 plus 10% volts, 50Hz, 3 phase ac power supply and complete with auto check function of connection error, auto, address setting. etc. the outdoor units shall be low noise type. The outdoor units shall be of following capacities: ( Carrier midea, Hitachi, voltas) ODU 20 HP
`Air handling unit (Floor mounted ) - Exposed tpe floor mounted air hanling units, Supply, installtion, testing, commissioning of factory fabricated outdoor tyoe double skined air handling unit horizontal type with fabricated out of extrucded aluminum (1.6 mm thickness min) Section with thermal break profile at corner and at joints for double skin air handling unit along with internal covrings with mixing chamber with 0.63 mm thick pre-plasticide galvanised sheet outside and 0.63mm thick polished stainless steel sheet inside with backward curved direct driven plug type in supply and exhaust side with fan section with fan motor with IE2 rating and suitable for 415 plus 10% , 3 phase , 50hz, 4 RD Cooling coil with coil section, pre-filter ( EU-4) Section with non wovem synthetic washable media of 10u ( micron) particle size with an efficiency of 90% before cooling coil . The polished strainless steel srain pan of 1.2mm thick duly insulated with 13mm thick nitrile rubber under cooling shall be provided . motor and belt drive package /direct driven arrangement , belt guard etc. for belt driven blower without face and bypass dampers. The AHU shall be insulated with 48 plus 2 mm thick injected fire retardent PUF of density 40 plus 2 kg/m3. The motor and fan assembly shall be mounted on aluminum extructed section. Marine light with limit switch shall be provided. The complete AHU shall conform to standard spec. The face velocity across cooling, filters should not exceed 500 FRM. AHU kit to be included for installation. The capacities of air handling shall be as follows. (13 TR Capacity with 4 row deep copper cooling coils) as per AHRI / Eurovent certifies The Air handling units (AHUs) shall be of follwings duty parameters : Supply of quantity: 5500 CFM, Static pressure: 50mm WG, Refrigeration load: 13 TR (Peak), Cooling coil : 4 Rows deep, Humidity: 60-70%` Make Geco/ Edgetech/ GEC
Supply and installation of Digital type diffrential pressure sensor. Quoted price shall be inclusive of all necessary arrangement required for installation of hang on wall/ door
Supply, installation , testing and commissioning of CU kits for AHUs having TEV and temperature set arrangemnt . It shall have cut off arrangement after a particular set value of supply air tempereture . Price should include all control cabling etc. AHU Kit
Supply and erection of MS base frame duly applied with red- oxide primer and followed by back enamel paints for ,mounting of outdoor units.
Supply, installtion, testing and commissioning of high pressure copper refrigerant piping including R-410a refrigerant of suitabe size as required and duly insulated with 19mm /13mm thick XLPE polythylene insulation , external refrigerant piping shall be laid on GI covered cable trays. piping inside occupied spaces shall be supported using MS hangers duly painted with black enamel paint entrie refrigetant piping work shall be carried out in accordance with the specifications. MS Sleeve of requisite size shall be provided at wall crossing. Piping shall be of suitable size as per the design schematic.
Supply , fabrication , installation and testing of sheet GI metal ducts complete with vanes, splitter dampers, hanging arrangement including check nuts in accordance with theapproved shop drawings and specifications. 24G SWG
Supply , fabrication , installation and testing of sheet GI metal ducts complete with vanes, splitter dampers, hanging arrangement including check nuts in accordance with theapproved shop drawings and specifications. 22G SWG
Supply , fabrication , installation and testing of sheet GI metal ducts complete with vanes, splitter dampers, hanging arrangement including check nuts in accordance with theapproved shop drawings and specifications. 20G SWG
Supply , installtion, testing of 125mm deep antivibration flexible joints at the outlet of air handling units /inline fans. Flexible connections shall be constructed using imported fire retardant fabric with extruded aluminum frame/flange on both sides of approved make
Supply, installation, testing and balancing of square supply air diffusers/grilles with removable key operated volume control dampers with opposed blades as per the approved shop drawings and specifications. The diffusers shall be anti-smudge ring type /flat type as approved by the interior designer. Diffusers shall be with removable core for the following neck sizes. The Diffusers shall be suitable for fixing in the gypsum/grid ceilling/ The diffusers shall be of regular type and with outer dimension of 450*450mm, 375mm*375mm and 300mm*300mm. Power coated extruded aluminum diffusers of approved colour and shades
Supply, installation, testing and balancing of square supply air diffusers/grilles with removable key operated volume control dampers with opposed blades as per the approved shop drawings and specifications. The diffusers shall be anti-smudge ring type /flat type as approved by the interior designer. Diffusers shall be with removable core for the following neck sizes. The Diffusers shall be suitable for fixing in the gypsum/grid ceilling/ The diffusers shall be of regular type and with outer dimension of 450*450mm, 375mm*375mm and 300mm*300mm. Supply, installation, testing of GI Box type volume control dampers as per the specifications and shop drawings.
Supply, installation, testing and balancing of square supply air diffusers/grilles with removable key operated volume control dampers with opposed blades as per the approved shop drawings and specifications. The diffusers shall be anti-smudge ring type /flat type as approved by the interior designer. Diffusers shall be with removable core for the following neck sizes. The Diffusers shall be suitable for fixing in the gypsum/grid ceilling/ The diffusers shall be of regular type and with outer dimension of 450*450mm, 375mm*375mm and 300mm*300mm. Supply, installation, testing of GI Multi blades type collar louver damper as per the specifications and shop drawings.
Supply and application of internal acoustic linning of supply air ducting using open cell nitrile rubber insulation with density within 140-180 kg/m3 as per the approved shop drawings and specifications. Insulation material shall be bonded with the ducts using metal screw and washers to facilitate grip to the GI Sheet. 15mm thick lining
Supply and application of external thermal insulation of supply /retrun air ducting using XLPE Polythylene/ nitrile rubber insulation with proper adhesive as per the specifications and drawings 13mm thick insulation
Supply and application of XLPE Polythylene / nitrile rubber insulation with same specifications as mentioned above and star bond with UV Protection paint for ducts exposed to atmosphere as per specifications. 19mm thick insulation for return air
bharti airconditioning co. (BID ID -1333898)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .