Renovation work (Civil and Electrical) at CFTRI - Resource Centre building, UPSIDC Industrial Area, Chinhat- Deva Road, Lucknow, Uttarpradesh state

Amount

Part A: Civil Work

Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling G.I pipes (exposed on wall) including all necessary fittings manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge: 15 mm to 40 mm nominal bore

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sq. metres and below

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area beyond 3 sq. metres

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Removing porcelin wash basin including pedestal of any size including stacking of useful materials within 50 metres lead and disposal of unserviceable materials within 50 metres lead.

Dismantling existing IWC including stacking serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Dismantling existing urinals including stacking serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Dismantling CI pipes including all necessary fittings manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge: 110mm dia

Making rough of the existing flooring surface by scrapping and hacking using mechanical and means preparing the surface rough for laying flooring tile.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 M sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.00 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 M sand)

15mm cement plaster on rough side of single or half brick wall of mix: including scaffolding at all heights 1:4 (1 cement: 4 M sand)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. MAKE: TATA/ JSW

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, including scaffolding at all heights etc. as required. In gratings, frames, guard bar, ladder, railings, brackets,gates, Portico and similar works Make: TATA/ APPOLO/ VIZAG

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 M sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form. Quote including scaffolding at all heights for : Suspended floors, roofs, landings, balconies and access platform

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc including scaffolding at all heights.

Providing and laying vitrified tiles in floor in different sizes (Minimum thickness of 10 mm) with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement : 4 M sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily. (Tile cost is considered for Rs 70.00/Sq.ft or Rs. 753/- per sqm including GST) Glazed vitrified tiles / Antiskid (Matt) finish of size Size of Tile 600x600 mm MAKE: SOMANY/ KAJARIA/NITCO/RAK

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 M sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. (Tile cost is considered for Rs 70.00/Sq.ft or Rs. 753/- per sqm including GST) Size of Tile 600x600 mm MAKE: SOMANY/ KAJARIA/ NITCO/RAK

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 M sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Tile cost is considered for Rs 55.00/Sq.ft or Rs. 592/- per sqm including GST) Size of tile 300x450 mm MAKE: SOMANY/ KAJARIA/NITCO/RAK

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 M sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. MAKE: SOMANY/ KAJARIA/NITCO/RAK

Grouting the joints of flooring tiles having joints of 5 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm Make: Leticrete, Asian Paints or FOSROCK

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) Make: JINDAL or its equivalent

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) Make: JINDAL or its equivalent

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (Pin Headed/ Plain) MAKE: SAINT GOBIAN OR MODI

Providing and fixing 9mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass/ stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. MAKE: NOVAPAN or its equivalent

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. Make: Godrej

Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing aluminium handles with SS screws etc. complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminium Size 100mm x 10mm length

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Make: Godrej or its equivalent

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks

Providing, laying and jointing PVC pipes of 6 kgf/ sq.cm pressure capacity including testing of joints etc., complete 110 mm diameter Make: ASHIRWAD/ FINOLEX

Providing and fixing PVC shoe 110mm Make: ASHIRWAD/ FINOLEX

Providing, laying and jointing PVC pipes of 6 kgf/ sq.cm pressure capacity including testing of joints etc., complete 63 mm diameter Make: ASHIRWAD/ FINOLEX

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) P or S trap with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Make : Cera or Hindware

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Make : Cera or Hindware

Providing and fixing urinals Make: CERA/ CAPRIANA SKU/ CAT No. : S4020112 (375 x390x 590 mm) or Hindware or its equivalent

Providing and fixing SS coated brass Waste coupling for urinals Make:Onida or its equivalent

Providing and fixing CP coated brass urinal spreader 15 mm dia Make: ONIDA or its equivalent

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Make : Cera or Hindwdare Tap : Onida

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste coupling and 40mm C.P. brass tap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm MAKE: CERA/ PARRYWARE/HINDWARE or its equivalent

Providing and fixing swan neck taps for laboratory sink Make: Hindware, Cera or its equivalent

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour Jet black Area of slab over 0.50 sqm

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Make : Cera or Hindwdare

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes MAKE: ASHIRWAD/ FINOLEX

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. External work - Exposed on wall 25 mm nominal dia Pipes MAKE: ASHIRWAD/ FINOLEX

Providing and fixing P.V.C waste pipe for sink or wash basin or urinals including P.V.C waste fittings complete. Semi rigid pipe 40 mm dia Make: KOHINOOR, ONIDA or its equivalent

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 M sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 M sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 M sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 M sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class designation 5.00

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 M sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 M sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 M sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 M sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 5.00

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Providing and fixing CP coated brass bib cock of approved quality confiming IS 8931 15mm dia Make: onida or its equivalent

Providing and fixing CP coated brass two way bib cock 15mm dia Make: onida or its equivalent

Providing and fixing on wall face PVC moulded fittings/ accessories for SWR rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Door Bend/ T Bend/ Plain Bend 90º 110 mm Make: Ashirwad/ FINOLEX

Providing and fixing CP Coated Brass Angle cock 15 mm Make: ONIDA or its equivalent

Providing and fixing of SWR nahani trap 100 mm dia including adhesive complete Make: Ashirwad / Astral or its equivalent

Providing and fixing brass heavy duty gate valve with CI wheel of approved quality (Screwed end) 25 mm nominal bore Make: ONIDA or its equivalent

Providing and fixing 100 mm SS grating with hole Make: Viking or its equivalent

Providing and fixing Health faucet Make: Parryware/ Hindware/ Watertech

Providing and fixing mirror of superior glass of 5.00mm thickness (of approved quality) and of required shape including necessary fixtures like SS studs, nuts etc complete. Make: Saint Gobian or its equivalent

Providing and fixing SS towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Make: ONIDA or its equivalent

Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thickwith zinc coating not less than 275gm/sqm

Providing and fixing tiled False Ceiling of approved materials of size 600x600 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanized @ 170 gsm/sqm) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x32mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T"at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3mm and laying false ceiling tiles of approved texture in the grid including, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications drawings and as directed by Engineer-in-Charge. 9 mm thick square edge PVC Laminated Gypsum Tile of size 600x600 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. The tiles should have Thermal Conductivity k = 0.24 w/m k, Colour white, Fire performance Class 0/Class1 (BS 476 Part 6&7) in module size of 600 x 600 x 9 mm MAKE: ARMGYP DEW DROPS (ARMSTRONG)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete including necessary scaffolding at all heights

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including necessary scaffolding at all heights Make: JK Wall putty/ Birla Wall Care

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. including necessary scaffolding at all heights With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre Make: asian or its equivalent

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic ompound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. including necessary scaffolding at all heights Two coats: Recommended brand: asian/NEROLAC/Dulex

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: including necessary scaffolding at all heights New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) MAKE: asian (Apex) or Nerolac

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, including necessary scaffolding at all heights Recommended brand: asian/NEROLAC/Dulex

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead for all lead upto 10 kms including all lifts involved.

Part B: Electrical Work

Supplying, Installation, Testing & Successful Commissioning of 36 Watts, 24 Inches x 24 Inches Square Shaped LED Fitting Day Cool White complete with internal wiring, 1 x 2 Way, 5 Amps, PVC Connector, 1 Metre length of any standard make rated 3 core copper wire etc., ready to use and to work with 230V Single Phase, 50Hz AC Supply, suitable to fix on falseceiling with required hardwares. Make: Please refer Special Electrical Conditions under Tender Document File.

Supplying, Installation, Testing & Successful Commissioning of 36 Watts 4 Feet LED Batten Type Day Cool Light complete with internal wiring, 1 metre length of any standard make rated 3 core copper wire etc.,, ready to use suitable to fix on wall / ceiling and to work with 230V Single Phase, 50Hz AC Supply. The end wire from the fitting shall be terminated to a 2 Way 5Amps PVC Connector and to connect to the existing point. Make: Please refer Special Electrical Conditions under Tender Document File.

Wiring for circuit / submain wiring with 4 X 25 sq. mm + 2 X 16 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class suitable size PVC conduit as required. Make: Please refer Special Electrical Conditions under Tender Document File. Note: All start & end point of the wires are to be terminated with "Cu" Lugs of suitable type and size.

Supplying, Installation, Testing & Successful Commissioning of 16 Modular GI Box along with Modular Base & Cover Plate for Modular Switches and Sockets in recess / wall using suitable hardwares etc. as required, making good the damage in case of recess fixing for plastering etc., as per directions of Engineer In-Charge. Following Modular items a) 5/6 Amp Switch - 2 Nos; b) 3/5 Pin 5/6 Amp Socket Outlet - 2 Nos; c) 15/16 Amp Switch - 2 Nos; d) 6 pin 15/16 Amp Socket Outlet - 2 Nos and e) 20 Amps, 2 Pole, "C" Curve, 10kA, 230V Mini MCB - 1 No; Internal wirings for 5 Amps Switch & Socket with 4.0 sq.mm FRLS Multistrand, Single Core Copper Wire; for 15 Amps Switch & Socket with 6.0 sq.mm FRLS Multistrand, Single Core Copper Wire. Red and Black Colour for Phase and Neutral and 4.0 sq.mm FRLS Multistrand, Single Core Copper Wire, 4.0 sq.mm Green Colour for Earthing Loop and terminate all the wires using suitable size Copper Lugs as required to be provided. Make: Please refer Special Electrical Conditions under Tender Document File.

Supply, Installation, Testing and Successful Commissioning of 12 Inch Dia, 300 mm sweep, industrial type ready to use Exhaust Fan having Bird Cage with 1.5 FRLS PVC insulated, copper conductor, single core cable and to fix with required size of MS frame duly painted with one coat of primer and 2 coats of paint, suitable hardwares etc., and provide one no. of 3 Pin 5/6 Amps ISI make Socket along with Gangbox and 3 Pin 5/6A Amps ISI make Plugtop as required. Make for All: Please refer Special Electrical Conditions under Tender Document File.

Supply, Installation, Testing and Successful Commissioning of 4 + 8 Way Double Door MCB Distribution Box made out 1.6mm thick CRCA sheet steel enclosure, painted with 2 coats of primer & 2 coats of Siemens Gray colour paint, suitable for 440V, AC to fix on surface / recess, complete with Din Rail consisting of 1 x 63Amps 4 Pole RCCB having a sensitivity current 30mA, 4 x 32 Amps 2 Pole MCB, "C" Curve, 10kA Breaking Capacity and blank plates. The output from the RCCB to be connected to the 3 x 32 Amp, 2 Pole, 10kA, "C" Curve MCBs as Input with independent 6.0 sq.mm single core copper wires, duly terminated with copper lugs. The earth wire from the mains should be terminated to the earth bolt / bar in the box with lugs. Make: Please refer Special Electrical Conditions under Tender Document File. Note: Labelling to be done for Input & Output Control in Paint / Acrylic Sticker.

Supply, Installation, Successful Commissioning and Testing of LT Double Door IP55 Indoor Panel Box of size 24" (W) x 36" (H) x 20" (D) made out of 1.6mm thick CRCA sheet steel enclosure, painted with 2 coats of red oxide & 2 coats of Siemens Gray colour paint and consisting of items as mentioned in a) to i). Exiting Mains / newly laid 4 x 25 sq.mm Copper Cable shall be terminated as Incoming to 250A MCCB along with 2 x 16 sq.mm for earth wire. The Output from the 250A MCCB shall be connected to 4 x 250A range Individual Copper Cable / Copper Bus-Bars. From the Bus-Bar, input shall be tapped for 4 x 63 Amps 4 Pole RCCB, 4 x 63 Amps 4 Pole MCB, 2 x 32 Amps 4 Pole MCB through rated FRLS multistrand copper wire using suitable type of lugs and standard colour code of wiring, neatly dressed. All new / existing out-going Cables / Circuits to be connected to this LT Panel. A Separate Aluminium Bus-Bar for connecting the Sub-Circuits Earth Wires in the Panel and extended for 2 Inches outside the Panel on both sides, for connecting Bare Copper Wires from the Earthpit should be provided. 4 Nos of plate cutting for fixing glands, entry and exit of Copper / UG Cable(s), Cable Alley are to be made available. The panel shall be have individual hinges with locking arrangement doors for each MCB / RCCB / MCCB distribution chamber within the compartment. The LT Box shall be mounted on the floor with total stand height of 0.75-1.5 Feet grouted to the floor, doors on front with locking arrangements. The stand portion from the floor on all 4 sides shall be suitable covered with removable type metal sheet (screwed to the stand) painted with same colour as of LT Box. All visible Bus-Bars inside the Panel shall be suitably covered with the 6mm Hylem sheets from. 6" x 6" water proof vents shall be provided on both the sides of the Panel, covered with wire mesh from inside. The LT Panel is also included for Supply, Installation, Successfull Commissioning and Testing of 1 number Of suitable range Multifunctional 3 Phase, 4 Wire Electronic Trivector Energy Meter with Class 0.1 - 1.0 of any accuracy, required range of CTs, to read and record upto 250 Amps. Important: All incoming / outgoing armoured cables / Sub-Main Circuits shall be terminated with suitable size copper / aluminium lugs (for copper cables / wires, coppler lugs and for aluminium cables / wires, aluminium lugs). During connections, if any Incoming / Outgoing cables is / are need to be extended, part of the work (Cable / Wires for extension of connection will be provided by CSIR-CFTRI). S.No: a), f), h) & i) Make: Any ISI Brand; S.No: b) to e) Make: Same as Item No:6. Panel Design: As per Engineer In-Charge. Note: Labelling to be done for Input & Output Control in Paint / Acrylic Sticker. a) Copper Bus Bar of size 50mm x 5 mm insulated with fire proof tape, mounted on Bus Bar Insulators. - 04 Nos. b) 250A, 36KA, 4Pole MCCB - 01 No. c) 63A, 4P RCCB 440V AC with 30mA sensitivity - 04 Nos. d) 32 A, 4Pole MCB - 02 Nos. e) 63 A, 4Pole MCB - 02 Nos. f) RYB LED Phase Indication Lamps with Fuse Unit for Input and Output - 2 Sets. g) Multifunctional 3 Phase, 4 Wire Electronic Trivector Energy Meter with Class 0.1 - 1.0 of any Accuracy - 01 No. h) HT Rubber Mat of 6' x 3' - 01 No. i) Aluminium Earth Bus-Bar 50mm x 5mm - 01 No.

Supply, Installation, Successful Commissioning and Testing of LT Double Door IP55 Indoor Panel Box of size 24" (W) x36" (H) x 20" (D) made out of 1.6mm thick CRCA sheet steel enclosure, painted with 2 coats of red oxide & 2 coats of Siemens Gray colour paint and consisting of items as mentioned in a) to f). The output from the 20/40KVA UPS shall be terminated as Incoming to 125A MCCB. The Output from the 125 MCCB shall be connected to 4 x 200A range Individual Copper Cable / Copper Bus-Bars. From the Bus-Bar, input shall be tapped for 4 x 63 Amps 4 Pole RCCB through rated FRLS multistrand copper wire using suitable type of lugs and standard colour code of wiring, neatly dressed. All Lighting Circuit (Lights & Fans), Part of the Switch Board Cicuits to be connected to this LT Panel. A Separate Aluminium Bus-Bar for connecting the Sub-Circuits Earth Wires in the Panel and extended for 2 Inches outside the Panel on both sides, for connecting Bare Copper Wires from the Earthpit should be provided. 4 Nos of plate cutting for fixing glands, entry and exit of UG cable(s), Cable Alley are to be made available. The panel shall be have individual hinges with locking arrangement doors for each MCB / RCCB / MCCB distribution chamber within the compartment. The LT Box shall be mounted on the floor with total stand height of 0.75-1.5 Feet grouted to the floor, doors on front with locking arrangements. The stand portion from the floor on all 4 sides shall be suitable covered with removable type metal sheet (screwed to the stand) painted with same colour as of LT Box. All visible Bus-Bars inside the Panel shall be suitably covered with the 6mm Hylem sheets from. 6" x 6" water proof vents shall be provided on both the sides of the Panel, covered with wire mesh from inside. Important: All incoming / outgoing armoured cables / Sub-Main Circuits shall be terminated with suitable size copper / aluminium lugs (for copper cables / wires, coppler lugs and for aluminium cables / wires, aluminium lugs). During connections, if any Incoming / Outgoing cables is / are need to be extended, part of the work (Cable / Wires for extension of connection will be provided by CSIR-CFTRI). S.No: a), d). e) & f) Make: Any ISI Brand; S.No: b) & c) Make: Same as Item No:6. Panel Design: As per Engineer In-Charge. Note: Labelling to be done for Input & Output Control in Paint / Acrylic Sticker. a) Copper Bus Bar of size 50mm x 5 mm insulated with fire proof tape, mounted on Bus Bar Insulators. - 04 Nos. b) 125A, 36KA, 4Pole MCCB - 01 No. c) 63A, 4P RCCB 440V AC with 30mA sensitivity - 04 Nos. d) RYB LED Phase Indication Lamps with Fuse Unit for Input and Output - 2 Sets. e) HT Rubber Mat of 6' x 3' - 01 No. f) Aluminium Earth Bus-Bar 50mm x 5mm - 01 No.

Labour charges for 8 feet depth earth pit below ground level, to dig including hard soil, rocks etc.,if any encountered, fixing the Item No:2.32, refilling of soil etc., as required. (along with charcoal / coke and salt from S.No:2.32 as required, already estimated under S.No.2.32).

Dismantling & taking down Old light Fittings / related wirings, hardwares etc., after carefully disconnecting the incoming electrical input and insulating the same, depositing all the old materials in an organised manner to the Auction / Electrical Section Store Yard or as per the advise of the Electrical Officer In-Charge of the Project without any damage.

Group A Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. Make: Please refer Special Electrical Conditions under Tender Document File.

Group B Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. Make for all: Same as Item No: 2.11

Group C Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. Make for all: Same as Item No: 2.11

Wiring for circuit / submain wiring alongwith earth wire with 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. Make for all: Same as Item No: 2.11. Note: All start, loop & end point of the wires are to be terminated with "Cu" Lugs of suitable type and size and individual pipes for wiring.

Wiring for circuit / submain wiring alongwith earth wire with 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. Make for all: Same as Item No: 2.11. Note: All start, loop & end point of the wires are to be terminated with "Cu" Lugs of suitable type and size and individual pipes for wiring.

Wiring for circuit / submain wiring alongwith earth wire with 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. Make for all: Same as Item No: 2.11. Note: All start, loop & end point of the wires are to be terminated with "Cu" Lugs of suitable type and size and individual pipes for wiring.

Wiring for circuit / submain wiring alongwith earth wire with 2 X 6 sq. mm + 1 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. Make for all: Same as Item No: 2.11. Note: All start, loop & end point of the wires are to be terminated with "Cu" Lugs of suitable type and size and individual pipes for wiring.

Wiring for circuit / submain wiring alongwith earth wire with 4 X 4 sq. mm + 2 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. Make for all: Same as Item No: 2.11. Note: All start, loop & end point of the wires are to be terminated with "Cu" Lugs of suitable type and size and individual pipes for wiring.

Wiring for circuit / submain wiring alongwith earth wire with 4 X 6 sq. mm + 2 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. Make for all: Same as Item No: 2.11. Note: All start, loop & end point of the wires are to be terminated with "Cu" Lugs of suitable type and size and individual pipes for wiring.

Wiring for circuit / submain wiring alongwith earth wire with 4 X 10 sq. mm + 2 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. Make for all: Same as Item No: 2.11. Note: All start, loop & end point of the wires are to be terminated with "Cu" Lugs of suitable type and size and individual pipes for wiring.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 2.06. a) 10 A, 240V, Single Pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 2.06. b) 32 A, 240V, Single Pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 2.06. c) 32 A, 240V, Double Pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 2.06. d) 32 A, 415V, Triple pole and neutral (Four Pole)

Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB) having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 2.06. a) 25 A

Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB) having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 2.06. a) 40 A

Supplying & Fixing DP sheet steel enclosure on surface / recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 2.06.

Supplying & Fixing TP sheet steel enclosure on surface / recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 2.06.

Supplying and fixing 20A, 240V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 2.06.

Supplying and fixing 20A, 415V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 2.06.

Supplying and fixing 30A, 415V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 2.06.

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. Note: Masonry enclosure size is 1.5 Feet x 1.5 Feet x 1.5 Feet. As per IS 3043, charcoal/ coke and salt should be refilled with 50 Kg each per earthpit. The connected copper flat from Copper Plate upto the funnel has to be brazed at the base and only SS nut, bolts and washers to be used.

Providing and laying earth connection from earth electrode with 4.00mm dia copper wire in 15mm G.I. pipefrom earth electrode including connection with copper thimble excavation and refilling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required.

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerence as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing etc. complete as required. Make: Please refer Special Electrical Conditions under Tender Document File.

Supplying and fixing of 25 mm size of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. Pipe Make: Same as Item No: 2.11.

M/S. DYNAMIC INFRA ENGINEERING (BID ID -886803)