Loading
Loading…
Loading…
Tender Value
₹99.4 L
EMD Value
₹2.0 L
Closing Date
28 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GSU
16 conditions · 4 needing a document upload
Only those firms which in their individual capacity, satisfy Standard Financial Criteria(s) need to quote for this tender. :The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-15, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. The tenderers shall submit Certificates to this effect which may be an attested Certificate from the concerned department / client and/or Audited Balance Sheet duly certified by the Chartered Accountant etc.
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared / audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-15 (Annexure-VIB), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant / Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
57 conditions · 15 needing a document upload
GSTIN number: Bidder shall submit attested or self attested copy of GSTIN certificate.
Following documents shall be submitted by the tenderer: (A)SOLE PROPRIETOR SHIP FIRM: (i)All other documents in terms of clause 1.1.12 of tender document . (B)HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii)All other documents in terms of clause 1.1.12 of tender document. (C)PARTNERSHIP FIRM:(i)A notarised copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii)A notarised or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm.(iii)An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract.(iv)All other documents in terms of clause 1.1.12 of tender document . (D)JOINT VENTURE (JV): APPLICABLE ONLY FOR WORKS COSTING MORE THAN Rs.10.00 Cr. Not applicable for this tender. (E)Company registered under Companies Act- 2013:(i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company.(ii)A copy of Certificate of Incorporation.(iii)A copy of Authorization / Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv)All other documents in terms of clause 1.1.12 of tender document. (F)LLP (Limited Liability Partnership) Firm under LLP Act-2008: (i)A copy of LLP Agreement.(ii)A copy of Certificate of Incorporation.(iii)A copy of Power of Attorney / Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP.(iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (G)Registered Society & Registered Trust: The tenderer shall submit: (i)A copy of the Certificate of Registration.(ii)A copy of Memorandum of Association of Society/Trust Deed.(iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust.(iv)A copy of Rules & Regulations of the Society.(v)All other documents in terms of clause 1.1.12 of tender document .
The tenderer shall submit a copy of certificate stating that all their statements/documents submitted alongwith bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-19. In addition to Annexure- 19, in case of other than Company/Proprietary firm Annexure 19(A) shall also be submitted by each member of a Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUF / Limited Liability Partnership (LLP) etc, as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatory incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Payment of Bid-security in respect of E- tendering will be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure-VIA of GCC Works 2022 and shall be valid for a period of 90 days beyond the bid validity period and any offer without the same will be treated as invalid. Details of bank account no. and technical details have been provided for in the software (IREPS) to which prospective registered tenderers will have access at the time of tendering.
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i) A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii) The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids. (iii) Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv).The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v)The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. (vi).The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. (vii)The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii)If the envelope is not sealed and marked as instructed above, the Authority assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
PAN CERTIFICATE : PAN The tenderer shall submit the photocopy of Permanent Account Number (PAN) issued by Income Tax authority attested by Gazetted officer / self attested.
Please submit the copy of the registration certificate of firm, PAN, GSTIN etc.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall study the Northern Railway General Conditions of Contract Regulations for Tenders & Contracts 2022 or latest along with tender documents before submission of the tender.
There is an option of payment to contractor through a letter of credit (LC) arrangement (Authority Railway Board's letter no. 201 8/CE-l/CT/9 dated 04.06.2018)as given in clause i .3.14 of tender document.
GCC works 2022(or latest if any) should be the integral part of this tender.
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials submitted by the tenderer, shall be self-attested/digitally signed by the tenderer or authorised representative of the tendering firm. Self-attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria" will be considered for evaluating his/their tender.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway there under.
In case of any information submitted by tenderer is found to be false, forged or incorrect after the award of contract, the contract shall be terminated. Bid Security, Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto five years.
No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suo-moto post tender letters of the tenders shall be treated as NULL & Void.
Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer.
The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the Contractor. The Contractor shall be responsible for deposition of applicable GST to the concerned authority.
Contractors will have to upload details of their LoAs, engaged workmen, wage payment details, PF/ESI details, bonus details etc, on website www.shramikkalyan.indianrailways.gov.in on monthly basis. (Railway Board' s letter No. 2018/CE-I/CT/4 dated 17.10.2018)
The Performance Guarantee (PG) shall be released after physical completion of the work based on 'Completion Certificate' issued by the competent authority stating that the contractor has complete the work in all respects satisfactorily. The Security Deposit shall also be released based on 'Completion Certificate' issued by Consignee / Engineer In- charge of the work to the contractor, submission of authentic documents that firm has paid GST as applicable by the extant rule and on completion of guarantee / warrantee period of ONE Year or as stipulated in Tender Documents.
If a tender is accepted on the quoted rates of bidder which is below the advertised tender value, an additional performance security shall be submitted by the bidder as below: Bid quoted (in % of advertised cost) - Additional Performance Guarantee (%): Below 0-5% (inclusive) - Nil and below 5%(in % of advertised cost) - 5% (Additional Performance Guarantee). (Authority : Railway Board Letter no.2022/CE- I/CT/GCC2022/POLICY/Pt.I (E-3320424 dated 13.03.2026 Regarding ACS No. 11 of GCC works 2022)) No
Electrical works in c/w balance work of Amrit Bharat Station Scheme PTK, GSP, Baijnath, UHP over JAT Division.
27-Elect-GSU-T-07-2026-27
27-Elect-GSU-T-07-2026-27
Open
Works - General
6 Months
Firozpur, Punjab
₹0
₹2.0 L
28 May 2026
5 May 2026
14 May 2026
95 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 99,41,430.24 | ||
| — | 30.00 | — | — | ||
| Supply and Erection of modular metal boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave). Metal boxes boards are to be concealed in the wall for 12 Module | — | — | — | 14,251.2 | |
| — | 30.00 | — | — | ||
| Supply and Erection of modular metal boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave). Metal boxes boards are to be concealed in the wall for 8 Module | — | — | — | 12,737.1 | |
| — | 30.00 | — | — | ||
| Supply and Erection of modular metal boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave). Metal boxes boards are to be concealed in the wall for 4 Module | — | — | — | 6,064.2 | |
| — | 300.00 | — | — | ||
| Supply, fixing, testing, and commissioning of modular type switch 6/10 Amps as per tech. specification IS/IE rules and site requirment. | — | — | — | 58,482 | |
| — | 50.00 | — | — | ||
| Supply, fixing, testing, and commissioning of modular type switch 16 Amps as per tech. specification IS/IE rules and site requirment. | — | — | — | 11,906.5 | |
| — | 50.00 | — | — | ||
| Supply, fixing, testing, and commissioning of modular type 6 pin switch socket 6/15 Amps as per tech. specification IS/IE rules and site requirment. | — | — | — | 16,931 | |
| — | 50.00 | — | — | ||
| Supply, fixing, testing, and commissioning of modular type multi socket 6 Amps 5 pin as per tech. specification IS/IE rules and site requirment. | — | — | — | 9,485 | |
| — | 3000.00 | — | — | ||
| Supply and recessing/fixing of 25mm (Medium) PVC conduit pipe conforming to IS 9537/Pt.III/1983 or Latest Version with accessories,junction box, etc including making chase, plastering/clamping etc as per technical specifications. | — | — | — | 1,14,840 | |
| — | 3000.00 | — | — | ||
| Wiring for light points with supply and laying of FRLS PVC insulated multistranded copper conductor cable 1100 Volt 1x1.5 Sq.mm multi stranded confirming to IS-694 latest in the existing PVC pipe. | — | — | — | 41,760 | |
| — | 1500.00 | — | — | ||
| Wiring for sub-main with 2x2.5 Sq mm FRLS PVC insulated multistranded copper conductor s/core cable in the recessed PVC conduit pipe 25 mm dia as required at site. | — | — | — | 54,885 | |
| — | 500.00 | — | — | ||
| Wiring for sub-main with 2x4.0 Sq.mm FRLS PVC insulated multistranded copper conductor s/core cable in the recessed PVC conduit pipe 25 mm dia as required at site. | — | — | — | 19,215 | |
| — | 400.00 | — | — | ||
| Supply, fixing, testing and commissioning of LED tube light system wattage 18 Watt to 20 Watt complete with all mounting arrangement & accessories & flexible copper wire for connection from ceiling rose as per ISS/IR rules & site requirement as per CEE/NR Specification No.CEE/NR/121-Elect/PS/2018 (Rev '3') Dated 28.06.2018 & CEE/NR/121-Elect/PS/2019 (Rev.4) dated 04.11.2019 or latest, | — | — | — | 2,20,004 | |
| — | 400.00 | — | — | ||
| Supply, fixing,testing and commissioning of 3-pin ceiling rose 5 Amp capacity on existing MS/PVC conduit junction boxes/casing caping Anchor, Cona, Kinjal, SSK or equivalent as per IS, IE rules and site requirement. | — | — | — | 5,936 | |
| — | 20.00 | — | — | ||
| Supply and erection of 36 W recess type LED light fitting (2x2 ft) complete with control panel & all accessories including connection with 2x2.5 sq.mm PVC insulated multi stranded FRLS copper conductor cable, testing,commissioning &earthing required and as per CEE/NR specification No. CEE/NR/121-Elect/PS/2018 (Rev.03)dated 28.06.2018 & CEE/NR/121-Elect/PS/2019 (Rev.4) dated04.11.2019 | — | — | — | 1,01,507.4 | |
| — | 50.00 | — | — | ||
| Supply, fixing, testing andcommissioning of energyefficient 230V, 50Hz a cceiling fan size of1200mm sweep havingwattage of 28W, range ofvoltage operation at various speed - 120 to260V AC with 5 stepspeed control electronicregulator, copper windingcomplete as per IS : 374 - 1979 or laterst, IE rule &site requirement. MakeBajaj, Usha, Havells,Crompton, Orient orequivalent. | — | — | — | 1,49,439.5 | |
| — | 20.00 | — | — | ||
| Supply, fixing,testing and commissioning of 380mm sweep, 1400 rpm (approx) propeller type exhaust fan complete as per IS, IE rule & site requirement.Make Usha, Orient,Bajaj or equivalent | — | — | — | 59,692 | |
| — | 6.00 | — | — | ||
| Supply, erection, testing and commissioning of the following Double door wall mounted Pre-fabricated L.T. Distribution Boards of approved make, as per explanatory note & comprising; (i) Incoming MCCB 4Pole 63 A 35 KA B/C - 1 No. (ii). Outgoing MCB 6 to 32 A. SP 10 KA B/C (4 Nos. On each Phase) - 12 Nos. | — | — | — | 91,717.62 | |
| — | 6.00 | — | — | ||
| Supply, erection, testing and commissioning of the following Double door wall mounted Pre-fabricated L.T. Distribution Boards of approved make, as per explanatory note & comprising; (i) Incoming MCB 40 A DP 10 KA B/C - 1 No. (ii) Outgoing MCB 6 to 32 A. SP 10 KA B/C - 4 Nos. | — | — | — | 10,462.68 | |
| — | 2.00 | — | — | ||
| Design, Supply, fixing, testing and commissioning of outdoor type feeder pillar panel having IP-65 protection (MCCB - Incoming & MCCB - Outgoing) comprising with the following MCCB's fixed in it of make Havells, Siemens, L&T, Schneider, Legrand or equivalent conforming to IEC 60947-2 / IS 13947: 2008 & IS 8623:2008 or latest with digital measuring instrument & bus-bar arrangement and conforming to PCEE/NR's spec. No. PCEE/NR/126-Elect/PS/2019 at Tech Spec-I attached or latest and as per IS, IE rules and site requirement. a) 4P MCCB 250Amps 36kA with adjustable thermal & fixed magnetic release = 01 No. (Incoming) b) 4P MCCB 200Amps 36kA with adjustable thermal & fixed magnetic release = 01 No. (Outgoing) c) 4P MCCB 63Amps 36 kA with adjustable thermal & fixed magnetic release = 03 Nos. (Outgoing) | — | — | — | 2,72,196 | |
| — | 30.00 | — | — | ||
| Earthing arrangement by providing earth electrode of GI pipe 50 mm dia (B class) 4.5 meter long with flange including 6 SWG GI earth wire from earth pipe to connecting point on switch board to distribution board/pole etc. as per site requirement including masonry enclosure as per Tech specification at annexure 'A' relevant ISS & IE rules and site requirements. A suitable CI/MS/RCC cover as approved by Rly . Representative, cover with locking arrangement shall be provided. | — | — | — | 70,518 | |
| — | 600.00 | — | — | ||
| Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as mentioned in explanatory note. | — | — | — | 5,382 | |
| — | 2000.00 | — | — | ||
| Transportation, Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specification including end terminations with Aluminium Clamping socket/lugs, testing and commissioning of Upto 25 sq.mm | — | — | — | 1,18,560 | |
| — | 2500.00 | — | — | ||
| Transportation, Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specification including end terminations with Aluminium Clamping socket/lugs, testing and commissioning of Above 25 sq.mm | — | — | — | 1,47,300 | |
| — | 10.00 | — | — | ||
| Design, manufacturing of floor mounted MS feeder post made of MS sheet 16 SWG Die pressed of size 550mm x 450mm x 275mm deep complete with Aluminium bus bars four Nos. having cable glands 2 Nos. duly grouted with cement concrete ratio 1:2:4 duly earthed with earthing terminals. | — | — | — | 38,743.9 | |
| — | 50.00 | — | — | ||
| Provision of Supply and Laying HDPE pipe 140 mm inner dia and 160 mm outer dia through trenchless method under Railway track/road/Platform etc Conforming to LATEST version of IS 4984 | — | — | — | 54,936.5 | |
| — | 15.00 | — | — | ||
| Supply, erection testing and commissioning of 6 mtr height single arm decorative GI pole with cast aluminium arms including 1 nos 80W tear drop pendant LED fitting along with foundation as per manufacturer's design complete. | — | — | — | 4,96,525.2 | |
| — | 20.00 | — | — | ||
| Supply, erection testing and commissioning of 6 mtr height double arm decorative GI pole with cast aluminium arms including 2 nos 80W teardrop LED fitting along with foundation as per manufacturer's design. | — | — | — | 8,29,236 | |
| — | 1.00 | — | — | ||
| Supply ,erection, testing and commissioning of Facade lighting with controller and accessories as per explanatory note. | — | — | — | 11,05,839.5 | |
| — | 3.00 | — | — | ||
| Supplying, erection, testing & commissioning of 16 Meter high mast system with its accessories. Mast shall be in two sections, hot dip galvanised and suitable for wind velocity as per IS 875 part 3. It shall also include accessories for high mast including head frame, steel wire rope 6mm dia 7/19 construction) double drum winch, Galvanised lantern carriage arrangement suitable for 8 luminaries symmetrically and its control gear boxes and its lighting finial. The mast shall have an integral power tool installed inside the base compartment for its operation. Erection and commissioning of the high mast with the help of suitable equipments. | — | — | — | 8,57,516.43 | |
| — | 24.00 | — | — | ||
| Supply, installation,testing and commissioning of 150 Watt LED based flood light fitting, operating voltage single phase 230V AC, 50Hz complete with led lamp & all mounting arrangement, accessories & flexible copper wire for connetion as per ISS/IR rules & as per CEE/NR Specification No. CEE/NR/121-Elect/PS/2018 (Rev.03) dated 28.06.2018 & CEE/NR/121-Elect/PS /2019 (Rev.4) dated 04.11.2019 respectively or latest | — | — | — | 3,76,864.8 | |
| — | 3.00 | — | — | ||
| Fabrication, supply and erection of Fencing around the high mast in square shape size 2M x 2M and height 1.5M from ground level fabricated from MS angle size 40x40x6mm, MS Flat size 40x6mm and wire mesh made of 8SWG wire and 1M wide hinged type lockable door as per drawing approved by Railway including grouting, CC platform around the high mast above 0.30M above ground level and painting etc. and as per technical specification. | — | — | — | 17,542.86 | |
| — | 3.00 | — | — | ||
| Design, manufacturing, supply, erection, testing and commissioning of astronomical timer switch along with TPN 63 Amps and associated accessories as per detail (a) Astronomical time switch model SEL-170 tiop of Indo Asian or equivalent MDS, Legrand, Siemens, L&T, ABB, AEG (b) 65 Amps TP contactor model No. LBF 650 A or equivalent of L&T, Siemens, ABB, AEG (c) TPN MCB 63 Amps (d) Accessories like wiring, locks, hinges, gaskets, nuts & bolts etc. (e) MS fabrication box 2 mm CRCA sheet size 17"x12"x6" powder coated to 50 micron thickness. | — | — | — | 68,401.71 | |
| — | 3.00 | — | — | ||
| Supplying, Installation, testing & commissioning of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates including design and casting of suitable shallow foundation with M-15 concrete for the high mast considering the safe soil bearing capacity at site as 10 T/Sq. Mtrs. at 2 mtrs depth. | — | — | — | 66,732.06 | |
| — | 3.00 | — | — | ||
| Supplying, Installation, testing & commissioningof twin dome aviation obstruction light with 2 nos. LED lamps. (One fitting per mast is necessary if no taller structure are in near vicinity). | — | — | — | 5,297.46 | |
| — | 10.00 | — | — | ||
| Supply, installation and commissioning of light weight wall mounted voltage stabilizer confirming to IS: 8448 suitable with toroidal care transformer having capacity 4 KVA, Input Voltage 135-290V and output voltage 220-240 V, MCB 32 Amps, time delay relay (2-4 min) with soft touch type instant and start switch, under voltage and over voltage cut off with indicators, Digital Voltmeter and Ammeter with soft type selector switch for measuring input & output voltage, indicator for power ON and timer ON. IS 8448 Latest version/Make Microtek, V-Guard or equivalent with RDSO/ISO/BIS/equivalent certification | — | — | — | 71,393.8 | |
| — | 40.00 | — | — | ||
| S.I.T.C of 70 watt LED Medium bay light fitting. | — | — | — | 1,48,478 | |
| — | 1000.00 | — | — | ||
| Supply & erection of 103 mm Inner dia Double Walled Corrugated pipe in ground under Railway track/road as required and as per explanatory note.. | — | — | — | 3,40,730 | |
| — | 500.00 | — | — | ||
| Design,manufacture,supply and display of wall / hanging / floor mounting type LED illuminated signages /direction boards confirming to RB guidelines fo rtechnical specification circulated videLetter No.2023/SD-II/22/07/02,Dtd.15.05.2023(copy enclosed asAnnexure). | — | — | — | 14,04,300 | |
| — | 500.00 | — | — | ||
| Erection andinstallation ofwall /hanging /floor mounting type LED illuminated signages /direction boardsin half elliptical shape | — | — | — | 1,40,430 | |
| — | 3.00 | — | — | ||
| Supply, fixing,testing and commissioning of 25A/32A, 30 mA RCCB AC type confirming toIS12640-1 & IEC61008-1 with10KA short circuit with stand capacity complete withen closure for Water Cooler, AC,Water Geyser &Refrigerator. | — | — | — | 5,695.41 | |
| — | 9.00 | — | — | ||
| Design manufacturing, supply fixing, testing and commissioning of LED based station Name boards(ENGLISH) in RGB colaor complete with connected accessories with all supporting work to be installed on Railw ay structures(each letter). | — | — | — | 1,31,433.39 | |
| — | 9.00 | — | — | ||
| Design manufacturing, supply fixing, testing and commissioning of LED based station Name boards(HINDI) in RGB colaor complete with connected accessories with all supporting work to be installed on Railw ay structures(each letter). | — | — | — | 1,46,084.31 | |
| — | 9.00 | — | — | ||
| Design manufacturing, supply fixing, testing and commissioning of LED based station Name boards(Punjabi) in RGB colaor complete with connected accessories with all supporting work to be installed on Railw ay structures(each letter) | — | — | — | 1,46,084.31 | |
| — | 40.00 | — | — | ||
| Supply & erection of 5Mpole with single armbracket hot dip galvanizedoctagonal pole with top 70mm and bottom 130 mmaround face made of 3mm thick, steel base platesize 200x200x12 mmcomplete with appropriatesleeve at the top of thepole for mounting armbracket 300 mm longsuitable for LED streetlight fittings includingcasting, muffing with cement concretefoundation (1:2:4)painting, earthing andfoundation GI nut, boltswith washer and smartpack junction box withsingle pole MCB andterminals as perexplanatory note | — | — | — | 2,98,913.2 | |
| — | 40.00 | — | — | ||
| Supply & erection of 5M pole with double arm bracket hot dip galvanized octagonal pole with top 70 mm and bottom 130 mm around face made of 3 mm thick, steel base plate size 200x200x12 mm complete with appropriate sleeve at the top of the pole for mounting arm bracket 300 mm long suitable for LED street light fittings including casting, muffing with cement concrete foundation (1:2:4) painting, earthing and foundation GI nut, bolts with washer and smart pack junction box with single pole MCB and terminals as per explanatory note | — | — | — | 3,99,137.2 | |
| — | 120.00 | — | — | ||
| Supply and erection of minimum 45 W LED Street light fitting operating voltage single phase 230 volts AC, 50Hz complete with all accessories as per CEE/NR Specification. No.CEE/NR/121-Elect/PS/2018 (Rev '3') Dated 28.06.2018 & CCE/NR/121-Elect/PS /2019 (Rev.4) dated 04.11.2019 or latest respectively including connection with 2x2.5 sq.mm PVC insulated multi stranded FRLS copper conductor cable, testing, commissioning & earthing required and as per explanatory note. | — | — | — | 3,85,842 | |
| — | 150.00 | — | — | ||
| Supply, fixing, testing and commissioning of 4-feet long surface mounting 36-watt, 5700K, CRI>80, LED Luminarie Fitting shall be environmental friendly, long life, corrosion resistant, impact proof IP66 with PC housing & opal finish cover suitable for wet location .Similar to Make- Havells Model No. MAGNUM NEO or Equivalent .Fitting shall be suitable for operation on single phase 240Volt, 50 HZ AC supply.Conforming to CEE/NR's spec. No. CEE/NR/121-Elect/PS/2018 (Rev- '3') or latest at Tech Spec-III attached &PCEE/NR's spec. No. PCEE/NR/121-Elect/PS/2019 (Rev- '4') at Tech Spec-IV attached or latest. | — | — | — | 7,92,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACS-11dated13.03.26toIRGCCApril-2022.pdf
ATTACHMENT
PPP_1.pdf
ATTACHMENT
LetterofCredit.pdf
ATTACHMENT
LatestCEESpec_compressed1.pdf
ATTACHMENT
GCCApril-2022.pdf
ATTACHMENT
AmendementinGCCofApr-2022.pdf
ATTACHMENT
Amendement-2GCCApr-2022.pdf
ATTACHMENT
Amendment-3GCCofApr-2022.pdf
ATTACHMENT
Amendment-4GCCofApr-2022.pdf
ATTACHMENT
Amendment-5GCCofApr-2022.pdf
ATTACHMENT
ACS6.pdf
ATTACHMENT
2024_09_25RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_7ACS-7_1.pdf
ATTACHMENT
2024_12_20IndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_8ACS-8.pdf
ATTACHMENT
2025_01_09IIndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_9ACS-9.pdf
ATTACHMENT
2025_03_04RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_10ACS-10.pdf
ATTACHMENT
2022-CE-I-CT-GCCCorrespondencedated.14.05.2024.pdf
ATTACHMENT
FIDDERPANELSPEC.pdf
ATTACHMENT
Annexuresignage.pdf
ATTACHMENT
SpecificationforRGBLEDBasedStationNameBoard.pdf
ATTACHMENT
TDJatbalance.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .