PROVN OF TOILET BLOCK IN 41 NSR UNIT LINE AND PROVN OF 2X COMPUTER SERVER ROOM NEAR BLDG NO P130 AT HQ CENTRAL COMD UNDER GE EAST LUCKNOW

Amount

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide & not exc. 1.5mtr depth for foundation, manholes/ laying of cable/pipe etc and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation or mass concrete etc complete all as specified and directed.

M&L for brick work with fly ash bricks(Old size), straight or curved on plan exc 6mtr mean radius, old size brick built in cement mortar 1:6 complete all as specified and directed.

Returning filling in cluding spreading levelling watering and well ramming in layers not exc 25cm in soft/loose soil.complete all as specified and directed.

Removing excavated material not exc 50mtrs and depositing where directed at level not exc 1.5 mtrs above trhe starting point complete all as specified and directed.

M&L for spreading, leveling and well ramminging excavated soil incl. watering as reqd in layers not exc 25cm thick (Reuse).complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for treating the soil under plinth protection at the rate of 5 litre of emulsion per square metre of surface area complete all as specified and directed.

M&L for Treating the back fill in contact with foundation at the rate of 7.50 litre of emulsion per square metre of vertical surface (area of sub structure in contact with back fill to be measured) complete all as specified and directed.

M&L for Treating the back fill in contact with foundation at the rate of 7.50 litre of emulsion per square metre of vertical surface (area of sub structure in contact with back fill to be measured) complete all as specified and directed.

M&L for RCC M-25 (20mm graded stone aggregate) design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc.complete all as specified and directed.

M&L for RCC M-25 (20mm graded stone aggregate) design mix as column etc.complete all as specified and directed.

M&L for RCC M-25 (20mm graded stone aggregate) design mix as Beams, cantilevers,bressummers, lintels over 1.5m span etc.complete all as specified and directed.

M&L for RCC M-25 (20mm graded stone aggregate) design mix as Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc.complete all as specified and directed.

M&L for RCC M-25 (20mm graded stone aggregate) design mix as chajja.complete all as specified and directed.

M&L for TMT 10mm dia and over cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed.

M&L for TMT 6mm to 8mm dia cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed..

Ditto as per item 17 above but 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders etc complete all as specified and directed.

M&L for formwork to sides of footings of concrete foundation with fair finished surfaces of concrete complete all as specified and directed.

M&L for formwork to sides of columns with rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to sides and soffits of lintels & beams including supports overhangs etc with rough finished surfaces of concrete.complete all as specified and directed.

M&L for formwork to roof slab with projection including edges with rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to chajjas, troughs and similar items including edges for rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to edges of concrete flats, trads, break in floors window cills,concrete railings openings in concrete walls floors and roofs n. exc 20cm wide and sides of RCC/Bands in walls horizontal and sloping and similar work exc 5cm but n.exc 10cm wide.complete all as specified and directed.

M&L for 15mm thick rendering in (CM) 1:4 mixed with WPC (as per manufacture instruction) on fair surfaces of brick walls finished even and smooth without using extra cement etc.complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on other than fair surfaces of brick walls finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for 5 mm thick plaster in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new plaster surfaces of wall and applying two coats of oil bound distemper ovr one coat of wall care puty 3mm thick on walls with alkali resistant primer complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed.

M&L for 100mm thick PCC type D-2 1:4:8 (40mm graded stone aggregate) for sub base.complete all as specified and directed.

M&L for PCC 25mm thick 1:2:4 of type B0 using 12.5mm graded stone aggregate as in base of floors complete all as specified and as directed.

M&L for acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type,in floors complete all as specified and directed.

Ditto- as above item No.35 but in skirting complete all as specified and directed.

M&L for hard core of broken bricks of gauge not exc 63 mm deposited sprayed levelled in layer not exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 75mm thick 1:3:6 type C2 (40mm graded stone aggr) as in plinth protection/ sub base of flor laid in alternate panels finished even and smooth without using extra cement complete all as specified and directed.

M&L for Forming construction joints 30mm deep and 10mm wide filled with sealing compound grade 'A' complete all as specified and directed

S&F pressed steel frames of size 105X60mm for ndoors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as for filling in door frames etc complete all as specified and as directed.

S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides.complete all as specified and directed.

S&F stainless steel butt hinges of size 100mm medium weight steel ISI marked complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia and including minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 200mm aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

S&F M.S framed work such as grills grating etc with ends of bars sholdered and /or riveted into spikes framed guard bars/railing complete all as specified and directed.

S&F powder coated (min 50 micron) alumium three track sliding window with extructed profile of top bottom &side track for fixing 5.50mm thick tint glass fitted with glazing clip and EPDM rubber in two shutters and fixed SS wire mesh in one shutter and powder coated deco grill incl roller and handle complete all as specified and as directed. Note:-(a) Quoted rate incl 5.5mm thick tint glass,SS wire mesh,Deco Grill etc in this item. (b) Framed section 3 Track size=92x31.75x1.5mm (c)Shutter section size=40x18x1.55mm

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality & glazing with oil putty in square area n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer surfaces complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for 15 mm thick plaster in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L for cleaning of all loose dirt and dust from roof surfaces and supplying and appying high performance hybrid polyurea elastomeric waterproofing coating cold applied of spray/brush applied , liquid membrane at 1.5 Kg/Sqm with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D2370, crack bridging ability of 3.5mm as per ASTM C1305, shore a hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying approved makes in two coats at a coverage of 1 Kg/Sqm, etc. complete as per manufacturer specification, including cleaning of the plastered surface etc complete all as specified and directected.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete complete all as specified & directed.

M&L for Non skid coloured ceramic tiles 7to 8 mm thick joint free (square/Rectanglar) area of each tiles exc .11 Sqm but not exc 0.18 Sqm in floor including screed bed 15mm thick or beding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with cement mortar bedding complete all as specified and drected. .

M&L for glazed ceramic coloured tiles (joint free) of size 450X 350X 7mm/300x600x7mm thick over 10mm thick plaster in CM 1:3 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl Dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and drected.

M&L for glazed ceramic coloured tiles (joint free) of size 450X 350X 7mm/300x600x7mm thick over 10mm thick plaster in CM 1:3 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and drected.

M&L for Reinforced cement concrete (nominal mix) type B1 1:2:4 (20mm graded stone aggregate) slabs supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition of reiforce cement concrete complete all as specified and as directed.

Fromwork to edges of concrete flats rough finish, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening) etc complete all as specified and directed.

S&F aluminium powder coated frame/chowkat of aluminium door section of 80x44x1.60 to1.8 mm thick fixed with rawal plug and screw or wire expansion hold fasteners complete all as specified and as directed.

M & L for Providing and fixing powder coated aluminium partly glazesd and partly paneled door shutter side hung type using 1.50mm thick standered door section having size of styles, top rails 83x44mm x 1.6 to 1.8mm thick where as bottom rails will be made up of 100x44mm Make: Jindal/Hindalico including necessary joining cleats glazing clips, rubber packing, anodized aluminium snap beading screws, powder coated aluminium fittings such as 100mm long 3 No. aluminium hinges B-21 ,type 01 No. aluminium tower bolt 200mm long and one no mortise lock 100mm size 4 levers (vertical type) and 01 No 300mm size long aluminium sliding bolt and 02 No fancey type fiber glass 150mm dia circular handle shall be provided to each door and glazing of top panel shall be made of 5.50 thick frosted glass make - Modi/ Saint gobin and pannelling shall be provided with 12mm thick exterior grade pre laiminated partical board with both side choice laminations, complete all as specified & directed.

S&F 1.5mm thick powder coated anodized aluminum partition wall paneled with HPL board size of aluminum section 44X44x 1.5 to 1.8mm thickness divided into square or rectangular (not exc. 1.20Sqm each panel ) in shape top panel including necessary joining cleats glazing clips, rubber packing, aluminum snap beading screws, complete all as specified & directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F vitreous china wash down water closet pan (Pedestal pattern EWC), white, wall mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed.

S&F chromium plated brass angle valve 15mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup complete all as specified & directed.

S&F CP brass toilet paper holder fixed to wall with chromium plated brass screws of approved quality complete all as specified & directed.

S&F health faucet for EWC CP hand hold with flexible pipe complete set complete all as specified & directed.

S&F 15mm dia CP two way tap consisting angle valve to control water suitable for jet cleaner complete all as specified & directed.

S&F CP brass towel ring 150mm dia fancy type of approved shade complete all as specified & directed .

S&F vitreous vanity cabinet with china table top Wash Hand Basin of size 900x 500 x 800 mm with CP bottle trap with CP waste coupling and sigle hole mixture pillar tap ,single lever etc complete all as per manufacturer's instruction complete all as specified and ditected.

S&F vitreous china white half stall type urinal with including CP brass urinal spreader, CP brass waste coupling, CP brass bottle trap, 40 mm dia waste pipe, grating & brackets, complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting exceeding 20cm girth complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down of existing one complete all as specified & directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down of existing one complete all as specified & directed.

S&F in tubular towel rail, brass chromium plated 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, any radius complete all as specified & directed.

M&L 100mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and ditected.

S&F CP Bib tap fancy type 15mm dia long body complete all as specified & directed.

S&F soap dish CP fixed with and including chromium plated brass screws complete all as specified and as directed.

S&F PVC connection 15mm bore ,450mm long with brass coupling fixed in position complete all as specified & directed.

M&L for cement concrete type B-1 1:2:4 as in copings, surface channels and drains benching of manholes laid to shape and slope and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for concrete bed to drain pipes 150mm bore including packing under and hauching against the sidses of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 complete all as specified and directed.

M&L for 150mm internal dia of salt glazed stoneware drain pipes laid in and jointed complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe of 100/150 mm bore and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed.

M&L for precast manhole cover slabs in RCC 1:2:4, type B-1, using 20 mm graded stone aggregate and set in CM 1:4 and incl complete all as specified and demolition of reinforced cement concrete complete all as specified and directed. by the Engineer-in-Charge. Note: Reinforcement will be measured and paid for seperately)

M&L for Earth filling under floor spreading and levelling in layers n exc 25 cm thick for well ramming watering required complete all as specified and directed .

M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 10 mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar in CM (1:4) on ceiling finished even and smooth without using extra cement, complete all as specified and directed.

M&L for RCC 1:1½ :3 type A-1(using 20 mm graded stone aggregate) as in foundations, footings, plinth beams; bases for columns, etc.complete all as specified and directed

M&L for RCC 1:1½ :3 type A-1(using 20 mm graded stone aggregate) as in Column, pillars, piers, posts and struts etc complete all as specified and directed

M&L RCC type B-1 (1:2:4) using 20 mm graded stone aggregate on beams, cantilevers, lintel over 1.5 m Span complete all as specified and directed.

M&L RCC type B-1 (1:2:4) using 20mm graded aggregate in slab supported on wall walls beams and columns in floors roof landings complete all as specified and directed.

Ditto as per item 96 above but 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders etc complete all as specified and directed.

M&L for formwork to sides of concrete of pillars, posts, struts, piers, columns etc complete all as specified and directed

M&L form work for flat fair finished surfaces of concrete to soffits of suspended slabs such as roof slab not exceeding 200mm thick complete all as specified and directed.

M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size exceeding 0.11 Sqm but not excceding 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.

M&L for 16 to 18mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edge laid over 15mm thick screed bed in CM (1:6) including rounding of edge of stone slabs one edge complete all as specified and directed.

M&L for rolled mild steel work as in door frame (chowkhats ) including provn of 10mm dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 (Gde 165-E) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161 of SSR (Part -II ) 2010 complete all as specified and directed.

S&F steel window / ventilator glazed and gauged (combination) with side hung / top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars and necessary cooler arrangement in window complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed.

S&F brass chromium plated shower rose of 125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

S&F PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S&F wash hand basins vitreous china, coloured flat back size 550 x 400mm fixed including bracket complete all as specified and directed.

S&F CP grating doom 100 mm dia chromium plated complete all as specified and directed.

S&F cast copper alloy health faucet chromium plated with 1.00 Mtr long flexible tube incl wall hook complete all as specified and directed

S&F CP brass jet spray with hand hold arrangement including 1.5 m long flexible pipe with hook of superior quality complete all as specified and directed

S&F, glass corner self assembly, fancy type, made of 6 to 7mm thick toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed.

S&F plastic water closet seat cover white, closed pattern with flat bottmom & cover and aluminum anodised hinging device complete all as specified and directed..

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all as specified

Supply and fixing 15mm bore brass CP mixer valve wash basin for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore cast copper alloy chromium plated bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

S&F angle valves 15mm bore , cast copper alloy chromium plated with long sunk and cap (Concealed type), screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

S&F vitreous China "Orissa pattern" size 580 x 440mm" coloured, with intergral foot rests with vitreous china 'P' or 'S' trap front or back inlet including connection to trap and to flushing pipe, anti syphnage pipe and making good the floor to match the existing complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F PVC (SWR) floor trap 110/75mm, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) reducers 75/110mm bore complete all as specified and directed.

S&F Vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed

S&F, 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0 Kg/Sqm over roof slab complete all as specified and directed

M&L PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in roof padding/ roof kerbs / benching / coved fillets etc rounded or chamfered on edges, complete all as specified and directed.

M/L for roof/sunkn treatment with polymeric water proofing mem breane with certain specification given below as under complete all as specified & directed (a) M&L plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (b) Applying a coat of bitumenous primer @ 0.50 LTRs /Sqm and allow to dry (c) Applying a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm. (d) Supply and laying APP based polymeric water proofing membrane, weight not less than 3.00 kg/sqm and and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) sealed the side laps with spread temper (e) applying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm. (f) Applying two coat of Aluminum paint including prepation of roof surface as diretcted.

M&L for preparation of newly plastered wall surfces and applying three coats of white wash complete all as specified and directed.

M&L for applying two coats of weather proof acrylic emulsion paint over a coat of 1mm thcik wall care putty & including a coat of emulsion wall primer all as per manufacture's instructions & as directed by Engr-in-Charge.

M&L for Hardcore Broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for 75mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade With Grey cement and pigment complete all as specified and directed.

M&L for Septic tanks 100 users, exc, in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc.,complete all as specified and directed.

M&L for Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 2.40 M dia X 3.0M deep. complete all as specified and directed.

M&L for Cement concrete 1:3:6 Type C1(20 mm graded aggregate as in lintels upto 1.5m clear span, cills,steps; seismicand other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs etc. complete all as specified and directed.

M&L for brick work with flyash old size bricks, straight or curved on plan exc. 6m mean radius, built in in cement mortar 1:4 complete all as specified and directed.

S&F for DWC (Double Wall Corrugated) Sewerage HDPE Pipes as per IS 16205 of Size 150 mm internal dia laid in trenches and jointed and tested as per manufacturer instruction complete all as specified and directed.

S&F for DWC (Double Wall Corrugated) Sewerage HDPE Pipes as per IS 16205 of Size 100 mm internal dia laid in trenches and jointed and tested as per manufacturer instruction complete all as specified and directed.

M&L PCC 1:3:6 type C2 (using 40m graded stone aggregate) concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are aid and tested for 100 mm bore pipes all as specified and as directed.

Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.

All as per serial item No 152 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.

All as per serial item No 152 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.

All as per Item No 152 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor complete all as specified & directed.

S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed

S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed

S&F Modular White cover plate with frame,12 module complete all as specified and as directed

Supply and fix frame plate with match cover six module complete all as specified & directed.

S&F Modular White cover plate with frame,8 module complete all as specified and as directed

S&F Modular White cover plate with frame,3 module complete all as specified and as directed

S&F Modular White cover plate with frame,2 module complete all as specified and as directed

S&F Modular Metal flush box 12 module complete all as specified and as directed

S&F Modular Metal flush box 8 module complete all as specified and as directed

Supply and fix terminal box suitable six modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. complete all as specified & directed.

S&F Modular Metal flush box 3 module complete all as specified and as directed

S&F Modular Metal flush box 2 module complete all as specified and as directed

M&L in factory made distribution board SP & N 8 way double door fabricated of CRCA sheet with metal door (IP-43 protection) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as a incomer and 6 SP MCBs as outgoing complete all as specified and directed conforming to IS: 8623 along end box for above DB complete all as specified & directed.

Supply and fix of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 08 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 160 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, TPN, AC, 415 volt of 63 Amp, "C" curve, 10 KA breaking capacity - 4 Nos.

M&L of SP MCB 6 TO 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete all as specified & directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning 40 to 100 Amp capacity complete all as specified & directed.

Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95, complete all as specified & directed.

Supply and fix 35/45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75k Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as perIEC 61000-4-5 incl MS Clamps and bracket of 40mm dia and farsnut for fixing the light complete all as specified & directed. by engineer in charge.

Supply and fixing PVC trunking/cable tray 50x100 mm size for laying cable including making good to disturbed wall surfaces complete all as specified and directed. Make- Hager, Cat No-GBD501310 or equivalent as approved by GE. (Note Rate of Accessories such as elbow , bend tee , socket, junctions and flexible cover ,Coupling set/End cap/Internal corner/External corner/flat corner/T-Piece/3-D Internal corner is incl in the item rates and no extra payment will be done to the contractor complete all as specified & directed.

Material and Labour for Submain wiring with 4 runs of FRLS grade PVC copper conductor cable 10 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 10 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings complete all as specified & directed.

M&L for wiring with four single core 16 sqmm multi-stranded copper conductor PVC FRLS insulated and unsheathed cable ISI marked drawn through in and including PVC conduit medium grade concealed in wall for sub main connection including 10.0 Sqmm PVC insulated unsheathed stranded copper conductor as earth wire all as specified.Note- Three run of 16 sqmm wire and one run of 10 sqmm cable incl 25mm conduit will be measured as one length.

M&L for laying armoured Copper power conductor cable 4 core 16 sqmm multi-stranded copper conductor PVC insulated and ISI marked suitable for 1100 V complete all as specified and directed by Eng-in-Charge.

Supply and fix Modular PVC enclosure for AC with a two pin and earth plug and socket complete with one 32 amps SPN minitrip MCBcomplete all as specified & directed.BY Eng-in-Charge.

Supplying and laying 1100 Volt grade heavy duty PVC cable with PVC insulated alluminium conductor served with inner sheathing pf PVC tape armoured XLPE cable with galvanized steel wire all PVC sheathed 50 sqmm 3.5 core nominal cross sectional area for service connection .complete all as specified & directed.

Supply, installing, commissioing and testing , split Air Conditioner of capacity 2.0 TR (Hot & Cold) with BEE 5 star, rotary compressor , Nano Titanium filter, auto clean function, indoor sound level 32 db, front panel display, wireless LCD remote, precoated aluminium fins, 477 cfm air circulation , auto fan speed, electric driven , suitable for working on 230 volts, single phase, 50 Hz supply complete including cutting of wall, providing stand for out door unit and making good disturbed surface of wall etc and remote operation complete all as specified & directed..NOTE-Extra length of Copper pipe, Main lead and Drain pipe required is included in the cost and will be provided by the contractor.

Supply & Install Voltage stabilizer 5 KVA automatic boost/buck transformer for low and high voltage with electronic transistorised relay/ time relay for two min , SP, 50 Hz with volt meter indicator and input voltage 140 to 280 and cut up voltage 215 to 240 V cap 4 KVA complete all as specified & directed.

M & L for chemical Earthing complete with Copper plate 600 x 600 x 3 mm buried directly in the ground vertically to depth not less than 2.25 Mtr below the ground level with the top edge of earth plate, depth not less than 1.5 Mtr below the ground level connected to copper strip of 20 mm x 3 mm size by means of bolts, nuts and washers , returning & filling the pit with excavated soil mixing with charcoal 250 KG ,crystal salt 200 KG , magnesium sulphate of 100 KG and vegitable soil all around the plate up to 350 mm above from top edge of plate and balance portion filling with excavated soil in layers not exceeding 25mm thick, 25 mm galvanized iron medium grade watering pipe up to top of plate ,50 mm bore galvanized iron light grade pipe for earth strip protection , including all excavation earth work in any type of soil ,PCC 1:3:6 type C1 for chamber of internal size 300 mm X300X300mm with 120 mm thick wall and 700 mmX700mmX150 mm thick ,bed concreate,RCC 1:2:4,type B1 for precast chamber cover 50 mm thick ,reinforced with welded steel wire fabric of XPM jali (weight not less than 4.00 Kg/sqm),funnel,with wire mesh, complete al as specified and directed. Note:- Up to 7.5 Mtr length of pipe of 40 mm dia and copper strip shall be deemed to be included in unit rate quoted by tenderer.

Supply and fix copper strip of size 20 x 3.0 mm with saddles and fixing screws etc for roof conductors and down conductors above ground level complete all as specified and directed

Supply and fix in replacement LED tube light fittings 1200 mm,20 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycabonate enviromental friendly, energy efficient complete all as specified and directed.

Supply and fix in replacement LED tube light fittings 600 mm, 10 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycabonate housing enviromental friendly, energy efficient complete all as specified and directed.

Supply and fix in replacement ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

Material and labour for sub main wiring with 6 Sq mm nominal cross sectional area,3 run single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 6 Sq mm nominal cross sectional area, single core r runs ( neutral and earth colour code wire), 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.Note : 3 runs of 6 sqmm, 2 run of 6 sqmm earth and nutral conductor and 2 run of PVC conduit shall be measured as one unit length for

Material and labour in replacement for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.Note : 2 runs of 4 sqmm, 1 run of 4 sqmm earth and nutral conductor and 1 run of PVC conduit shall be measured as one unit length for

Supply and fix AC modular Box 20 Amp with steel enclosure suitable for Geyser & AC protection to human from eletric shock due to direct and Indirect current as well as provide protection from overload and short circuit fault complete with MCB 20Amp after fixing making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified & directed.

M&L in factory made powder coated distribution board 4 way TPN DB Double door with metal double door (IP-43 protection IK -09) fabricated of CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps bus bar, Neutral bar, Standard din rail,earth bar and cable ties for cable management, top and bottom removable gland plates with provn for MCB TPN and RCCB as incomer and 12 SP MCBs outgoing after fixing making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified & directed.

Supply and fix in replacement of MCB, SP, AC, 240 volt of 06 to 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fix in replacement of MCB, TPN, AC, 415 volt of 63 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

S&F of exhaust fan single phase, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm complete all as specified & directed.

Supply and fixing in replacement LED Bldg security light fitting LED 35 watt with SPD, PF not less or equal 0.9,epoxy coated cover sheet aluminium housing with heat resistant toughtened glass & IP 66 incl with bracket, clamps, nuts, bolts protection complete all as specified and directed and directed.

Cutting walls any type, making holes for fixing of exhaust fan of any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed

Supply and fixing of stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC, vertical type, working pressure min 0.8 Mpa with ,multi function safety valve and PUF insulation including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer, water connection complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core complete all as specified and directed.

Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed. i.e 18 cm punned down thick shall be considerd for mesurement)

M&L Old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable, adjacent/abutting each other complete all as specified & directed.

Supply and fix GI pipe 80 mm medium grade in wall incl cutting complete and making good surface complete all as specified & directed.

Supply & fix ball brass valves, high pressure, with polythene flote anu flynut complete, screwed for iron pipe and brass ferrule complete all as specified & directed .

S&F Gun metal gate valve with iron wheel hand ,screwed both ends,complete for size 25 mm bore including connecting materials complete all as specified and as directed.

Supply & fixing galvanised iron tubes of size 25mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed .

Supply & fixing galvanised iron tubes of size 20 mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed .

M/S Reliance Construction (BID ID -3306215)

SEAHAWK ENTERPRISES PVT LTD (BID ID -3300290)