Renovation, Development of infrastructure, office Set-up (civil and electrical) etc. of 3rd Floor of new REAR Block Building, HSVP, Sector 6, Panchkula for establishment of the office of Haryana Water Resources Authority (HWRA).

Amount

Commercial hard wood such as Partal, hollock, champ, chikrassy and chaplash etc. (Non coniferous timber other than teak conforming to I.S. specification no.1003 killn seasoned) wrought, planed and fixed in position as per HSR 17.8

Providing and fixing 4 mm thick commercial ply wood with iron screw on one side in partitions, including fixing to frames with brass screws complete (beading and frame work to be paid separately) as per HSR 17.67 + note i

Teak wood plain or chamfered edges or curved additional moulding to door and window shutters, fixed in position complete, as per design and shape required as per HSR 17.57 (a)

Providing and fixing six-levers brass 10 cm mortice latch and lock, and a pair of lever handles with necessary screws, etc., complete (Indian make of reputed firm, such as Godrej or eauivalent) as per HSR 17.73

Supplying and fixing hydraulic door closer, I.S.I.mark, with necessary screws, etc., complete as per HSR 17.82 (c)

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.00 mm thick as per DSR 9.127.2

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness as per DSR 21.4.1

Providing and fixing 6 mm thick commercial ply wood with iron screw on one side in partitions, including fixing to frames with brass screws complete (beading and frame work to be paid separately) (N/S item)

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) as per DSR 26.27.1

Providing and fixing toughened glass 12mm of reputed make with Dorma WCP including frosting tape as per design approved complete as per DNIT (N/S Item)

Providing and fixing seamless glass doors 12 mm thick glass toughened with best quality fittings complete as per DNIT (N/S Item)

Providing and fixing wooden IN CHAIRPERSON ROOM flooring High quality AC-4 joint German technology complete to statisfaction of Engineer-in-charge complete as per DNIT (N/S Item)

Painting two coats with ready-mixed emulsion paint in all shades for interior use on bricks, plaster, cement, fibre board etc. using 1st quality paint as per HSR 16.27

Providing and laying Preparation of plastered or concrete surfaces for painting including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to the required finish and including priming coat with cement primer in all shades on newly plastered or concrete surfaces.[1st Quality] as per HSR 16.24 + 16.25

Wooden panelling IN CHAIR PERSON ROOM made of 19 mm ply base with 4 mm veneer on it with design as per design (N/S Item)

Wall paper in the chairperson room (N/S Item)

Providing PU polishing complete in all respect including cost of material and labour finish to the statisfaction of EIC.AREA SAME AS PANELLING IN CHAIR PERSON ROOM (N/S Item)

P/F OF FLUSH DOOR - chaiperson entrance, toilet , ducts, board room,secy room , toilet , he , she toilets (N/S Item)

POLISH WORK IN GROOVE IN SUNMICA (N/S Item)

S/E of moulded case circuit breakers as per HSR 31.12 (c) (ii)

ii) 100A-220A, 415V, 10 K.A 3 phase

S/E of sheet steel enclosure distribution boards suitable for MCBs etc. on wall as per HSR 31.12 (d)

(iv) DB 4 way TPN

S/E of MCB/Isolator 240/415V in the existing distribution board as per HSR 31.17

(a) (ii) 6A-32A. SP

(a) (iii) 40A-63A SPN

(a) (iii) 40A-63A TPN

S/E of Bakelite angle/straight button holder as per HSR 31.18 (xi)

S/E of under ground cable loose in existing pipe or trench-unarmoud as per HSR 31.26

xlii) 35 sqmm 4 core cable

Wiring in 1.5 sqmm PVC insulated copper conductor cable in existing pipe as per HSR 31.38

(i) (b) Medium point

(ii) (a) Short point

(iii) (a) short point

(vi) (c) Long point

(vii) (a) Short point

(vii) (b) Medium point

(vii) (c) Long point

(viii) (c) Long point

S/E of PVC unsheathed copper conductor cable single core as per HSR 31.40

(i) Cable size 1.5.sqmm (3/0.81mm)

(ii) Cable size 2.5 sqmm (3/1.05mm) Circuit Wire+UPS Wiring

(iii) Cable size 4.00 sqmm (7/0.85mm)

iv) Cable size 6.00 sqmm(7/1.05mm) For AC circuit

S/E of double door sheet steel enclosure as per HSR 31.41

(vi) 8 way TPN (Horizontal)8+24

S/E of PVC conduit pipe ISI marked(medium) recessed in wall/ceiling etc. as per HSR 31.44

(a) 20 mm dia

(b) 25mm dia

P/F of modular type accessories of approved brand make in existing box Anchor (wood) / ABB (classic) / North West as per HSR 31.56

(i) 6 A 1 way switch

(ii) 6 A 2 way switch

(iv) 6 A socket

(iii) 16 A power switch

(vi) 16 A power socket

(vii) bell push

ix) call bell ding dong ( monitca)

S/E of G.I. concealed sheet metal boxes with inner/outer faceplate including concealing the box as per HSR 31.57

(i) 2 Modules

iii) 4 Modules

iv) 6 Modules

v) 8 Modules

Supplying & laying PVC pipes for cable laying as per HSR 31.58

i) PVC pipe of 32 mm dia

3-Pin top Anchkor make

Supply and Fixing led downlighter 18 w in false ceiling. complete as per DNIT( havells, philips,wipro)

Supply and Fixing Panel 2’’*2’’ LED 36-watt Havells,philips,wipro in false ceiling complete as per DNIT

Supply and erection of Wall fan 400mm single phase of make Crompton/Havell's ISI marked (dzire /swing model havell's) including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and louver shutter complete in all respects as appd. and desired by the Engineer in- charge at site Wall fan 400mm complete as per DNIT

Supply and Erection of flexible PVC pipe 20mm complete as per DNIT

Supply and Fixing of 2 Ton cassette air-conditioner including Voltage stablizer, M.S stand and Installation complete as per DNIT( mitsubishi, hitachi, o general)

Supply and Fixing of 1.5 Ton cassette air-conditioner including Voltage stablizer, M.S stand and Installation complete as per DNIT( mitsubishi, hitachi, o general)

Supply and Fixing of 3 Ton cassette air-conditioner including Voltage stablizer, M.S stand and Installation complete as per DNIT( mitsubishi, hitachi, o general)

Supply and Erection of copper piping insulated for cassette air-conditioner complete as per DNIT

Supply and Erection of Drain piping for cassette air-conditioner complete as per DNIT

Supplying, laying & testing Cable- CAT 6 UTP 23AWG Solid: 305M Item no. NCB-C6UGRYR-305 DLINK complete as per DNIT

Supplying, laying & testing Patch Cord- CAT 6 UTP 24AWG PATCH CORD: 1M, Plug 30U' Snagless Item no. NCB-C6UGRYR1-1 complete as per DNIT

Supplying, laying & testing Patch Cord- CAT 6 UTP 24AWG PATCH CORD: 2M, Plug 30U' Snagless Item No. NCB-C6UGRYR1-2 DLINK complete as per DNIT

Supplying, laying & testing I/O- Jack Cat 6 Keystone UTP - White Item no. NKJ-C6WHI1B21 complete as per DNIT

Supplying , laying & testing Faceplate - Face Plate - Single Item no.NFP-0WHI11 complete as per DNIT

Supplying, laying & testing SMB- Gang Box for single, Dual Face Plate Item No. NBB-011 complete as per DNIT

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required complete as per DNIT.Telephone socket outlet

Supplying, Installation, testing and commissioning of following sizes of telephone distribution board in M.S. hinged type box duly painted complete with Krone type tag block etc. including terminations of cable as required complete as per DNIT.50 Pair

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as required complete as per DNIT.2 Pair

3 Port PDU I-Ball Make

P/F of Cable T.V

Supplying, laying & testing CLI based progility make exchange equipped with 16 extns. 6 trunks expandable to 48 extension, model-HP130 complete as per DNIT

Supplying, laying & testing of MDF with Saar tech make Disc modules complete as per DNIT

Supplying and drawing 2- pair PVC insulated copper cable in the existing surface / recessed steel / PVC conduit as required complete as per DNIT

Supplying and drawing 5- pair PVC insulated copper cable in the existing surface / recessed steel / PVC conduit as required complete as per DNIT

Supplying, laying & testing Cable- CAT 6 UTP 23AWG Solid complete as per DNIT

Supplying, laying & testing of CLI based plan set, model M-78 complete as per DNIT

For use of modular accessories

Switch 5A

Socket 5A

switch 15 A

socket 15A

KAMRA CONSTRUCTION CO.