REPAIR/MAINT OF CERTAIN B/R WORK AT INSTALLATION, PUMP HOUSE, ETC UNDER AGE B/R - II AT BABINA CANTT

Amount

Demolition of brick work/stone masonary built in cement mortar etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M mean radius built in cement mortar (1 : 6) etc complete all as specified and as directed

M & L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping including use and waste of form work where necessary complete all as specified and as directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete all as specified.

M&L renderig 15mm thick cement mortar 1:6 on fair faces of brick or concrete surface of wall and finish even smooth with out using extra cement complete all as directed by the Engineer - In- Charge.

M&L renderig 15mm thick cment mortar 1:4 on other than fair faces of brick work or concrete surface of wall finish even and smooth with out using extra cment compete all as specified and as directed.

M&L for Cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregates as in surface channels and drains including form work etc complete all as specified and directed

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for complete remoal of existing treatment from wall and coping and appying two coat of oil bound distemper over a coat primer including prepration of surface complete all as specified and as directed.

M&L for a coat of JK/Birla wall care putty 1mm thick including prepration of surface complete all as specified and as directed.

M & L for complete removal of existing treatment from wall and coping and appying two coat of cement base paint over a coat of alkali resistant primer including prepration of surface complete all as specified and as directed.

M&L preparation of old decorated surfaces and writting letters n.exc 30cm high including back ground n.exc 450mm dia complete all as specified and directed

M&L for Providing reinforced precast cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in louvres and jallies, 40mm thick (mea sured solid), including all mouldings set in CM 1:4 complete all as specified and directed.

M & L surface excavation n . exc 30cm deep and averaging 15cm deep and getting out soft and loose soil complete all as specified and directed.

Excavating in trenches not exc 1.5m wide and n. exc 1.5m in depth for foundation etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Dismantling of wrought iron or MS work of any position and description not otherwise complete all as specified and as directed.

Dismantling of chain link fencing (wire mesh) in any type complete all as specified and as directed.

Taking down barbed wire or other wire in fencing fixed to any type of standard rails, straining bolts etc. (each line wire to be measured)complete all as specified and as directed.

Excavation in post holes each n.exc 0.50cum, getting out, returning, filling, in and ramming earth in layers n.exc. 25cm, watering and removing surplus soil complete all as specified and as directed.

M&L PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in foundations, filling and mass conrete complete all as specified and as directed.

M&L for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Fixing only chain link fencing including line wire, any mesh,size and type of standards,rails, straining bolts,etc including provision of binding wire complete all as specified and as directed.

Supply only chain link MS galvanised fencing any size or type complete all as specified and as directed.

S&F mild steel screw bolts (machine made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc. 5 cm long ( diameter of neck 11 to 15 mm) complete all as specified and directed.

M&L for TMT10mmdia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in line wire for chain link fencing complete all as specified and as directed.

M&L for preparing new steel surfaces over 10 cm width or girth of any description, not otherwise described and applying two coats of synthetic enamel paint over a coat of red-oxide primer ,complete all as specified.

S & F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbed at 75mm spacings and straight and fixing to any type of standred rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured) including taking existing unservicable GI steel barbed wire fencing fixed in any position .

Restraining ,resecuring galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbed at 75mm spacings and straight and fixing to any type of standred rails, straining bolts including making good staples etc complete all as specified and as directed. Note:- (each line wire to be measured).

S&F for Steel rolling shutters of 1mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete all as specified and as directed.

Demolition of cement concrete (unreinfored ) in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed

M&L for PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, sub base/flooring complete all as specified and directed.

M&L 40 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate)as in floor complete all as specified and as directed

M&L Glass dividing strips , 3 mm thick and 28 mm width complete all as specified and as directed.

M&L for Hardcore of gauge n exc. 63 mm of broken bricks, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, path laid in panel surface finished even and fair complete all as specified and as directed

S& F in repair 25mm bore dia ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in newly taken tank (minimum weight 25mm - 225 gms) complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S&F in repaire Vitreous China wash down water closet pan (pedestal pattern) (EWC), white including connections to drain (or outgoing pipe) and to flushing pipe, with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts anti-syphonage pipe including seat cover white etc. complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

S & F in repair Vitreous China bowl urinal flat back small ( Special) of Hindware with grating and union for discharge pipe, push tap (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed .

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed.

S&F in repairs 15mm dia bore pillar tap cast copper alloy, with capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed

S&F in repairs 15mm dia bore pillar tap Fency type cast copper alloy, with capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynut, screwed for iron pipe and fixed complete all as specified and as directed

Taking down chowkhats or frames with shutter (with out taking off shutter from the frame)n.exc 1.5 sqm each complete all as specified and as directed

Taking down chowkhats or frames with shutter (with out taking off shutter from the frame) exc 1.5sqm and n exc 4sqm each complete all as specified and as directed

Taking down wooden shutters of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and as directed.

S&F for 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4 type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom. PCC shall be provided in hollow frame in same rates.

S&F mild steel flat iron of size 25x3 mm as in hold fasts and clamps & similar small articles confirming to Fe-410 W (Gde E-250) complete all as specified and as directed by the Engr-in-Charge.

S&F solid PVC door frames of size 50mmx47m made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a VC sheet strip of 20mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rails & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame weled/ sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing

S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters (factory made), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge.

S&F for 30 mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed.

S&F steel windows z section with side hung shutters including box type hinges with steel handle and steel peg stay, glazing bar dovetailed or welded for receiving glass after and including taking out old unserviseable steel window complete all as specified and as directed.

S&F steel windows z section with side hung shutters including box type hinges with steel handle and steel peg stay, without glazing bar dovetailed or welded for receiving glass after and including taking out old unserviseable steel window complete all as specified and as directed.

S&F framed work such as grills, grating, etc, with ends of bars shouldered and or riveted, or froged into spikes framed guard bars, barred iron doors, ladders, Walk way, Cattle trap pipe, railings or similar work confirming to Fe 290 Gde-E-165 complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay, including taking down old wooden ventilator complete all as specified and as directed.

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane complete all as specified and as directed.

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.

S&F 100mm size mild steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and as directed

S&F 150 mm Floor door stopper of aiuminium alloy body and tongue, anodised, with hard drawn steel spring , fixed in floor complete all as specified and as directed.

S&F for 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

S&F for 300mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

S&F 150 mm size aluminium handles, cast type, anodised and fixed of approved make & ISI marked complete all as specified and as directed.

M&F for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engr-in-Charge.

S&F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

S&F in repair galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete steel confirming to Fe 410-W (Gde E-250) quality A.complete all as specified and as directed

Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as specified and as directed.

Material and labour for colour glazed ceramic tiles (Premium quality) (300X200mm) X 6mm thick as in wall, dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1 : 4) complete all as specified and as directed by the Engr-in-Charge.

M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, including 10 mm thick rendering in cement mortar 1:4 in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed

M&L for machine cut Kota stone slab in floor 20-25 mm thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 as base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and nosing complete all as specified and directed.

M&L for machine cut Kota stone slab in skirting/vertical surfaces 20 to 25 mm thick laid over and including 10 mm thick rendering in cement mortar 1:4 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and nosing complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment over 5 mm thick sand bed over 100mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) complete all as specified and as directed.

M&L Coloured Chequered Glossy finish cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bedding in CM (1:6) complete all as specified and as directed.

Dismantling timber santling 40sqcm, wooden trusses, wooden post etc complete all as specified and as directed.

M&L 2nd class hard wood as in scantling, Wooden trusses, wooden post etc complete all as specified and as directed.

Dismantling AC sheet, Galvalume sheet, Iron sheet etc. roofing with ridge (corugated or semi corrugated) complete all as specified and as directed.

S&F 6mm thick asbestos cement corrugated or semi corrugated sheet in roofs fixed with L type or J type hook bolts complete all as specified and as directed.

S&F asbestos cement two piece adjustable plain wing ridge 6mm thick in pair fixed with L type or J type hook bolts complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and as directed.

M&L mild steel work in hand rails, half round or other steel section or core for Wind ties for roof including securing bolts, post and struts cutting tops to shape as directed, drilling holes, notching for wire etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

Demolition of PCC/lime terracing of any description and in any position as in roof terracing complete all as specified and places where directed by Engineer-in-Charge

M&L plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregate as in padding over roof finished and laid to required slope complete all as specified and directed by the Engineer -In-Charge .

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.

M&L for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is green finished even and fair including mixing of water proofing compound as per manufacturer instruction complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately)

Supply only water proofing compound complete all as specified and as directed.

M&L applying water proofing treatment with the following :- (a) One coat of bitumen primer conforming to IS-3384 @ 0.4Kg / sqm (b) A layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified

M&L for preparing of APP membrane surfcases of any description, not otherwise described and applying two coats of synthetic Aluminium paint on APP membrane surface on roof top complete all as specified.

Supply and fix in replacement Chromium Plated towel ring square with round flange complete all as specified and as directed by Engineer-in-Charge.

Supply and fix as in replacement hand shower (health faucet) (ABS Chrome palted) with 8mm dia, 1m long, flexible tube with wall hook complete all as specified and as directed by Engineer-in-Charge .

M/S Chadha Brothers

M/s Hansraj Shivhare

Shree Jee Associates