Providing Internal and External Electrification, Generator, Lift, CCTV system and Air-conditioning arrangements to MCH, NCD and DIALYSIS Building in Government Hospital at Melapalayam in Tirunelveli District.

Amount

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A FT switch with painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light point / fan point (for electronic regulator). (For Lift shaft)

Supply and fixing of single box type 4'-20 W LED fitting (Philips / Havells / Eq) with CRCA body complete with TW round blocks on wall or ceiling with 20 W LED tube with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of square type recessed 2' x 2' 36W LED luminaire (Philips / Havells / Eq) on false ceiling with steel chain and PVC unsheathead copper leads from terminals to the fitting.

Supply and fixing of WT bulk head fitting (Havells / equivalent) suitable for 9W LED lamp with lamp.

Supply and fixing of 18W TRIM CLIPON LED panel Round (Havells make / Eq) Recess Cum surface mounting fitting of 6500K CCT and PVC unsheathead copper leads from terminals to the fitting and necessary connection complete.

Supply and fixing of Twin box type 4'-20 W LED fitting (Philips / Havells / Eq) with CRCA body complete with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with 2 nos of 20 W LED tubes.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

Supply and fixing of 16"(400 mm) wall mounting fan (Orient Electric Wall-49) with remote with suitable clamps and necessary conections complete.

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod on the existing fan clamp

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12”) sweep (light duty) AC Exhaust fan.

Supply & Fixing of AC / DC 76mm Buzzer /call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable TW round block with 1 Module GI flush mounting box, 1 Module combined plastic cover plate and 1 module Modular type Bell push Switch with indicator complete(The GI flush mounting box,cover plate and switch should be of Legrand/ Hager/ Crabtree/ Equilvalent).

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 2 no. 6A two module socket, 1no.6/16 A two module socket , 2nos 6A one module switch, 2nos 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) [Legrand (MDS) / Hager (L&T) make]

Supply and fixing of 32A FP MCB in sheet enclosure in flush with wall with earth connection. [The MCB and metal enclosure should be with Legrand / Hager make]. (For pump, UPS and RO units)

Supply and fixing of 63A FP MCB in sheet enclosure in flush with wall with earth connection. [The MCB and metal enclosure should be with Legrand / Hager make] (For Ductable AC units)

Supply and fixing of Vertical type 8 way triple pole neutral MCCB distribution board in sheet steel enclosure double door type with metal door with IP 43 - IK 09 protection with 125A 4 pole MCCB as incoming and 8Nos 63A TP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCCBDB and MCB's should be with Legrand / Hager make)

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB as incoming and 3nos. 32A 3P MCB, 15 nos.6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End. (3rd floor AC DB)

Supply and fixing of 7 segment 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door type with metal door with IP 43 - IK 09 protection with 63A 4 pole MCB as incoming and 3Nos 63A DP RCCB as sub incomer and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCBDB and MCB's should be with Legrand / Hager make) (Lighting & 3rd Floor essential power)

Supply and fixing of 7 segment 6 way triple pole neutral MCB distribution board in sheet steel enclosure double door type with metal door with IP 43 - IK 09 protection with 63A 4 pole MCB as incoming and 3Nos 63A DP RCCB as sub incomer and 18 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCBDB and MCB's should be with Legrand / Hager make) (Ground, 1st & 2nd Essential power)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 63A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only. (For Lifts and water pump motor)

Supply and fixing of 125A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only. (For Genset)

Supply and fixing of 200 A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses doublebreak on suitable angle iron frame work with MS cable entry boxes with earth connection only (For TNEB Mains)

Supply and fixing of 125 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only. (For Genset )

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour. (For AC plugs and power plugs)

Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. (For LDBs)

Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour. ( 32A FPMCB)

Supply and run of 4 of 10 sq.mm (140/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and run of 4 of 16 sq.mm (101/0.45) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and Run of 4 of 10 sq.mm (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade on 7/20 GI wire for service connection mains

Supply and Run of 4 of 16 sq.mm (101/0.45) PVC insulated SC unsheathed copper conductor of 1100 V grade on 7/20 GI wire for service connection mains

Supply and Laying of 3 1/2 x 35 sq.mm. aluminium PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3-1/2 x 35 sq.mm. aluminium PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. aluminium PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 35 sq.mm. aluminium PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and Laying of 3 1/2 x 50 sq.mm. aluminium PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3-1/2 x 50 sq.mm. aluminium PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and frxing of brass cable gland for 3-1/2 x 50 sq.mm. aluminium PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2 x 50 sq.mm. aluminium PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and clamping of 3-1/2 x 70 sq.mm. aluminium PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. aluminium PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2 x 70 sq.mm. aluminium PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and clamping of 3-1/2 x 185 sq.mm. aluminium PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3 1/2 x 185 sq.mm aluminium PVC LTUG armoured cable with earth connection.

Supply and providing cable end termination of 3 1/2 x 185sqmm PVC LTUG Aluminium armoured cable withnecessary aluminium cable sockets by crimping etc. with electrical connection comple.

Supply, Fabrication, erection of 250 A Capacity dust and vermin proof cubical EB LTCT metering panel board size of 900mm(L) X 1200mm (H)X 300mm (D) made up of 18SWG sheet steel for outer body, doors, switch and KWH meters, seperation, supports and with supply and fixingof R,Y,B & N tinned copper flat suitable for carrying 250A. Earth bus runs all round the panel to provide earth connection for incoming Fuse, and meter chamber earth bus as section 250A fuse cutout for putty type & meter chambers provided with 5mm thick transparent glass at the front for reading purpose with sealing provision by TNEB and supply. The panel board should be painted with High quality powder Coated paint with superscriptions. The panel is supplied with CT (molded type CT coil) of 250/5A class 01 - 3 Nos

Supply and fixing of 3 phase 200A aerial fuse unit for 3 nos 200A fuse units(500A) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps.

62.5KVA Genset: Supply, Erection, Testing, Commissioning and Handing over of 1 No 62.5 KVA Diesel Generator set of 0.8P.f, Three Phase, 415/440Volts, 50c/s, 1500RPM as detailed below ENGINE: Air cooled Diesel engine suitable for generator application with a shaft Output of 83 BHP at 1500 RPM under NTP Condition as per BSS 5514/IS 10000. The engine shall comprise the following standard scope of supply: (Make Kirloskar green / Cummins / Ashok Leyland) 1. Dry type Air cleaner 2. Expansion bellow 3. Radiator, Radiator fan and mounting 4. Air to air charge cooler 5. Exhaust Gas turbo charger 6. Lube oil cooler and Lube oil filter 7. Fuel filter(pre and micro) 8. In-line Mono-block fuel injection pump with governor and fuel feed pump 9. Electronic governor 10. 24V Battery charging alternator 11. 24V Volt electric starter motor 12. Engine test Certificate 13. Residential Mufler 14. Fly wheel with starter ring.

1. ENGINE INSTRUMENT PANEL MOUNTED. Engine control panel consisting of ON/OFF/START Key Lube oil pressure guage , oil temperature gauge, high water temperature guage and electronic hour meter and RPM indicator 2. SAFETY SYSTEM OF ENGINE :-The Engine shall trip for the following conditions with visual alarm device 1. Low lubricating oil pressure 2. High Water temperature 3. Vee-belt failure and over speed 4. The visual indicator should be provide for Low battery indication. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load.3. ALTERNATOR : Alternator capacity of 62.5 KVA/50 KW,AC 3 phase, 50HZ, 415/420V, 0.8PF with brushless excitation, self regulated designed to run at 1500 RPM under NTP conditions confirming to BS 5000/ IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate (Make: Kirloskar/ Stamford)

4.ACOUSTIC ENCLOSURE:- Acoustic enclosure shall be powder coated and fabricated of 16 SWG CRCA MS sheet.The silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC Machine to maintain dimensional accuracy of hole within 0.1mm Powder coating done after seven – tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 Kg/m density mineral wool of 100mm thickness as Acoustic material. Four hinged doors shall be provided to canopy. The maximum permissible sound pressure level for new diesel generator (DG) sets shall be 75 dB(A) at 1 metre from the enclosure surface, as per CPCB norms. Surface treatment – Painting: The enclosure surface shall be suitably treated for degreasing de-rusting and posphating. The canopies are passed through seven – tank treatment thoroughly. Additional features of canopies: Canopy fabricated on CNC machines with dimensional accuracy of 0.1 mm so as to increase its durability.

Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any World class Cooling package: Canopies shall have cooling package for which it can also perform at 45 degree C/ambient temperature. No grouting required on the ground, only a level surface capable of with standing the DG weight.Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. The Gen set frame shall also be provided with hooks for unloading Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well within 5-7 deg centigrade.

5. FUEL TANK : 150 liters. Removable fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connection and mechanical fuel gauge. Fuel tank can be easily removed for clearing or any maintenance.Supply and filling of diesel to test and run the genset at full load for 8 hours 6. BASE FRAME : The base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall be have provision for mounting of acoustic enclosure on it. The supply of generator set includes loading. Unloading and transportation charges. 7. Battery: 1 No 12V 150AH Battery. 8. Valid Type Approval Certificate and Conformity of Production certificate from the Authorised agencies should be produced to the department officials.

Providing suitable concrete foundation with cement concrete 1 : 2: 4 for height of 2 feet with sand cushion all around the foundation and erection of 62.5KVA Generator set (DG dimension : 2950 x 1150 x 1550 mm) with proper alignment over the foundation

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

Supply, fabrication, erection and comissioning of 200A capacity dust and vermin proof cubical panel board size of 6.5' X 1' X 5' made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with 1"x1/4" tinned cu. Flat for 3 phase, 1"x1/8" tinned cu flat for neutral, 1" x 1/8" tinned cu flat for earth connections with bus bar insulators complete with the following tinned Cu flat should be used between busbar and switches: 1"x1/4" tinned cu. Flat for 1No 200A incoming switch to bus bar, 1"x1/8" tinned cu. Flat for interconnection of 2 Nos 125A Outgoing switches to bus bar, 1"x1/8" copper flat for 7 Nos 100A outgoing Switches to bus bar and including supply.

A separate chamber on top of one side should be provided with multi function meter to display Line & Phase Voltage, Phase Current, Power Factor and Frequency with one set of LED pilot lamp, fuse holder with suitable HRC fuse for each phase with suitable CT coil arrangements. The panel should be fabricated as per relevant IE rules & CEIG specification for accommodation of 10 Nos 3 phase switches and supply & fixing of the following switches.1. 200 A TPN switch disconnector fuse units interior only with HRC fuses double break - 1No 2. 125A TPN switch disconnector fuse units interior only with HRC fuses double break - 2Nos 3. 100A TPN switch disconnector fuse units interior only with HRC fuses double break - 7Nos.

In each cubical switch, live portion of bus bar should be shrouded by 6mm thick hylum sheet separators, and properly earthed by tinned solid copper flat as I.E rules CEIG sepecifications.The earth bus with two runs of 1" x 1/8"tinned copper flat must be run all round the panel to provide double earth connection. The panel should be painted with two high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel 3"x1½"x½" iron frame work support complete. (The TPN switches should be L&T / Siemens make only)

Lightning Rod: Supply and Installation of Early Streamer Emission Air Terminal (ESEAT). Model: L The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required), collects energy from the ambient electric field.The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (ΔTs) obtained during the lab test for the offered model is 60 μs.The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is avilable to test the healthiness of the ESEAT on request (Page No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011). ESEAT Model : L - Radius of protection : 86 Metres Level of protection considered for the Project-II level.

MOUNTING STRUCTURE: Supply and installation of Standard / Special Mounting Structure of height 4.5 mts. pipe, and 300 x 300 x8mm MS plate, 3 mts.48mm OD class C GI outer pipe,1.8 mtr,3Bmm OD inner pipe, for roof mounting on concrete base and with FRP adapter

DOWN CONDUCTOR: Supply and run of 25mm x 6mm GI Flat Down Condutor with necessary clamps / supports on wall / floor / ground for earth connection.

TEST LINK: Supply and fixing of Test Link Box for each Down conductor in order to disconnect the earth termination system to enable measurement of resistance.

SURGE PROTECTION: Supply and insallation Cabinet Type Class 1 and 2 Combined Model SPD to arrest surges and overvoltages in the power line due to lighning switching action etc. they must be installed in the incoming MCC panel / DB of the respective buling in parallel to the power circuit. Model: PSV4-12.5/400TT (3 phase power network)

Supply and fixing of 7.5KVA 1phase input -1phase output Microprocessor Technology based Double conversion and Pure Sine wave with inbuilt isolation transformer inverter system with 20Nos 12V/100AH SMF battery to provide minimum 1 hour backup along with Powder coated MS Rack and interlink cables with following specifications: Nominal Voltage : 208VAC/220VAC/230VAC Frequency: 40 Hz~55Hz @ 50 Hz system Acceptable Voltage Range : 165 ~285 VAC OUTPUT Nominal Voltage : 220V / 230V AC Overload Specs (Mains Mode) : 110%-120% for 30 MIN Overload Specs (Battery Mode) : 110% -120% for 3 MIN Noise level: Less than 50dB @ 1 Meter Warranty: Two years (Inverter Make : Luminous / Microtek / Eq, Battery make : Exide)

Supply, Installation, testing and commissioning and handing over of Air-Cooled self contained ceiling suspended 5.5 TR Ductable airconditioning units with indoor unit comprising scroll type compressor, evaporator coil, fan motor controls & insulated drain pan enclosed in a sheet metal cabinet and outdoor unit comprising Condenser coil & fan enclosed in powder coated sheet metal cabinet Unit shall be suitable for operation on 415V ∓ 10% Volts,50 HZ, AC Supply, units shall be supplied with microprocessor control panel. (Make : Blue star/Carrier/Eq)

Supply, fabrication and fixing of MS channel for mounting the Airconditioning Indoor Unit.

Supply, fabrication and fixing of MS channel for mounting the Airconditioning Outdoor Unit.

Supply and filling of R410A Refrigerant Gas

Supply, Fabrication and Erection of fabricated ducting made up of GI sheets of 22 Gauge thickness.

Supply, Fabrication and Erection of fabricated ducting made up of GI sheets of 24 Gauge thickness.

Supply and providing Acoustic for initial portion of Ducting with 12mm thick fiber glass rigid board covered with Tissue Paper and Aluminium Perforated Sheet.

Supply and fixing of extruded Aluminium powder Coated, supply and return Air Grilles / Diffusers with volume control dampers.

Supply and fixing of flexible Canvas connection

Supply and fixing of Duct Mouth Dampers

Supply and fixing of 50 mm thick Anti Vibrating Rubber Pads

Supply and providing thermal insulation of 9 mm thick vidoflex with Aluminium Foil.

Supply and fixing of Refrigirant piping out of hard drawn copper pipe set of 1-1/8" and 5/8" size

Supply and providing of pipeline nitrile rubber insulation for refrigerant and drain pipe lines

Supply and providing of 1.5sqmm copper flexible cable

Supply and providing of 0.5sqmm 4 core flexible signal cable

Supply erection, testing and commissioning of 2.0 TR (6000 K.cal/Hr) ABS Plastic Split type Inverter Air conditioner conforming to IS 1391 (Part-2) 1992 with Amdt No. 1 to 2 fitted with inverter compressor operating on refrigerant of non CFC suitable for wall mounting for operation on 230V, 50HZ single phase AC supply with 3 star rating as per BEE specification and capable of performing the functions 1) Cooling 2) Dehumidifying 3) Air circulating 4) Filtering

The installation work for the above split type AC units inculdes the following 1. Mounting/ Fitting Indoor and Outdoor units at the respective locations. 2. Laying refrigerant pipeline of required length not exceeding 4 metres distance and connecting both units after drilling hole/holes in the wall, if required. Thickness of copper tubing shall not be less than 0.8mm 3. Insulating the suction pipe with expanded polyethelene foam 5mm tubing 4. Laying 20mm dia flexible PVC drain pipe to throw out the condensate water being formed with in the indoor unit. 5. Leakage testing the entire system. 6. Charging refrigerant gas in the unit. 7.Suitable electric wiring to be provided with 2.5 sqmm PVC insulated copper wire between indoor units upto 6 mtrs length and up to switch with in 3 meters of the location of indoor unit. (Carrier / Bluestar / O-General / Daikin)

Supply and Installation of 5 KVA Electronic Automatic Voltage Stabilizer V- GUARD make VND 500 Model with Input Voltage range of 150Volt - 285Volt and Output Voltage range 200Volts to 230 Volts with High and Low Voltage cut off and 3 minutes time delay relay with demonstration.

Supply and laying of 5/8" and 3/8" soft drawn copper refrigerant pipe of 0.8mm thick by flaring connection with interconnection wire between indoor & outdoor unit and 20mm drain pipe. (Extra beyond 3 mts/AC unit)

Supply and fixing of MS stand for fixing outdoor unit.

Supply and fixing of 1" PVC water drain pipe line

Supply, erection, testing, commissioning and handing over of 1 No 20 persons capacity bed cum passenger gearless Lift with machine room as per the following Technical specificationsLocation : Melapalayam Government hospital 1. Type of lift : Hospital Lift 2. Capacity of lift : 20 persons (1360 Kgs) 3. Speed : 1 Metre / Sec 4. Type of Drive: Specific variable voltage variable frequency V3F drive with enhanced ride comfort and leveling functions. (Micro Processor Based) 5. No. of floors: Ground +3 floor 6. Total Travel: 10.8 metres 7. Levelling Accuracy: High level accuracy with smooth and jerk free stopping .8. Construction of Car: Stainless steel 304 grade car with SS 304 grade hand rail, Neat hair line finish vinyl flooring and false ceiling .9. Position of machine: Directly above the lift shaft. 10. No. of landing entrance: 4 Nos. 11. No. of car entrance: one in front only 12.Car entrance door: Power operated V3F drive Centre opening sliding stainless steel scratch proof door with hair line finish.B104 13. Landing entrance door: side opening stainless steel door with hair line finish with provision for emergency key opening at all landings. 14.Lift well existing: 2300mm (width) x 3000mm (depth)

29. Sill angles and fascia plates: included in the scope. 30. Steel for lift machinery: Included in the scope.31. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by lift contractor during the guarantee period of one year. 32. Automatic Rescue device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, inverter, under voltage protection system etc., complete with all accessories. 33. To be provided by the lift contractor with in-built intercom ( push type) in car panel and with provision of push type intercom in machine room and ground floor entrance. 34. Floor annunciator with music with announcement in both Tamil and English. 35. Special features:a. Infra-red door sensor with full height screenb. Full width half height rear panel mirrorc. Voltage stabilizer for circuit control.d. Stainless Steel signal fixtures.e. Vandal proof S.S. Button with S.S. coverf. SS door frames for landing doors.g. VF door operator.h. Call Register signali. Stainless steel facia plate for car operating panel and landing fixtures

.j. On – Off switch for fan and lightk. Over load warning indicator with audio announcement36. Other standard features: Over speed governor, phase failure alarm bell, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, electro magnetic brake with compression springs car safety gears buffer, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limit switch main suspension ropes counter weights lifting joint joist for mounting the machineries. 37. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period of not less than one year 38.Site testing in accordance with IS 14665 should be carried out at the time of handing over. 39. Supply of operation and maintenance manual with necessary tools for operation. 40. Lift licence : Preparation of drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor. (make: Johnson / Kone/ OTIS)

Supply, installation testing and comissioning of Hik vision / Dhuva make 4MP Bullet network IP camera with H.265+ compression technology, CMOS image sensor technology, clear imaging against strong back light with 120dB WDR technology, EXIR 2.0: advanced infrared technology with long IR range with IP67 & IK10 protection

Supply and installation of 32 channel Network Video Recorder with 2 SATA ports, resolution upto 2 ch @ 8MP or 4 ch @ 4MP 16 ch Sych play back ; Bandwidth I/o : 256 Mbps / 160 Mbps, Dual RJ45 port, SATA (upto 10TB), 1 HDMI & 1 VGA, 2 x USB 2.0, 1 x USB 3.0 Alarm I/O 16/4, RAID. (Make : Uniview / Hikvision DS-7732NI-K4 / Dahua)

Supply, fixing and termination of 8 Port PoE Switches (Higher End) for IP Camera.

Supply, fixing of 4TB Surveillance Hard Disk (Higher End) for NVR.

Supply and fixing of 2U rack (Higher end) with accessories and necessary connection compete.

Supply and installation of Sony KD-55X80J /Samsung Make 55 inches 4K HDR LED Television with suitable wall mount accesories, 5 Meter 4K HDMI Cable and Wireless Mouse.

Supply and run of 2 of 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in existing PVC rigid pipe concealed in wall and ceiling.

Supply, fixing and termination of 24 Port Semi-managed 10/ 100/ 1000 LAN Network switch (Higher End) in existing Rack with accessories.

Supply and fixing of 25mm PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour.

Supply and run of Sterlite make 6 core indoor OFC Cable in existing HDPE Pipe or PVC Rigid Pipe.

Supply and run of Polycab / Legrand / D-Link make Cat 6 Unarmoured LAN & CCTV cable in existing PVC pipe on wall and ceiling.

Supply, splicing and termination of Single Mode Media Converter (Higher End) for Optical Fibre Cable.

Supply and laying of Impression make 20m HDMI cable.

Supply and erection of 1 kVA Single Phase In & Single Phase Out sinewave inverter with 2nos 12V/150AH SMF battery to provide backup for minimum 1 hour with two year warranty and necessary connection complete. (Inverter Make : Luminous / Microtek / Eq, Battery make: Exide)

Supply and fixing of 9U rack (Higher end) with accessories and necessary connection compete.

Mohan M