8456 E8 PROVISION OF CERTAIN MINOR REVENUE SPECIAL REPAIR WORKS IN WEST AND EAST AREA UNDER GE M AF JALAHALLI BANGALORE

Amount

Supply and fixing Insulated PVC wall lining consisting of PVC insulated panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing thickness of insulated PVC wall lining 25mm all as specified

Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing

Excavation in trenches not exe. 1.5 m wide and not Exe. 3m in depth for pole foundation and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m deep for foundation etc., and getting out in any type of soil.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in width and not exceeding 1.5 mtr in depth for laying of cables up to proper level complete all as specified and directed by Engr-in-charge.

Excavating in post holes (or similar holes) each n exc 0.5 Cu.m, getting out, returning, filling in and ramming earth broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil.

Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete.

Cement concrete in foundations, filling and mass concreteType B2 1:2:4 mm using 40mm grade crushed stone aggregate upto existing surface level or removing the any type of tiles carefully and refixing properly as per existing surface

Cement concrete in coping of pole mass concreteType B1, 1:2:4, 20 mm grade crushed stone aggregate upto existing surface level or removing the any type of tiles carefully and refixing properly as per existing surface

Returning filling in including spreading, leveling watering and well ramming in layer not exceeding 25 Cms.

Removing surplus exacavated material from excavation not exc 50 meter and depositing where directed at a level not exc 1.5 meter above the starting point complete all as specified and directed by Engr-in-charge.

Dismantling floor hearth or wall tiling including cement mortar bedding but incl screed bed and plaster.

40 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings

Screed bed or bedding layer of mortar 20mm thick for laying floor finishes IN CM 1:4

Material and labour for machine pressed precast conrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment incl dismantling.

Supply and fix powder coating of any colour (thickness of powder coating not less than 50 micron) anodised aluminium partitions, with using aluminium section weighing 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, anodized aluminium snap beading screws exculding Sheet glass of 4 mm thick and 12mm thick prelaminated Particle board etc, complete all as specified and as directed by Engineer-in-Charge. Note: Glass and prelaminated board will be measured and paid separately under respective item.

Supply only 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane

Supply only 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations

Material and labour Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Supply only Chain link MS galvanisd fencing, any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Supply and fixing steel work in tubular posts and roof trusses including special shaped washer etc completed using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St-240 (Supply and fixing) completed all as specified and as directed by the Engineer-in-charge.

Supply and fixing Mild steel work in roof trusses, purlins and heavy brackets framing (Beams, tee, angle, channel or flat sections) incl distance pieces cleats etc conforming to Fe 410 W Gde E-250 and completed all as specified and as directed by the Engineer-in-charge.

Supply and fixing Mild Steel plates (plain or chequered) channels, square cut or notched (ordinary or counter sunk) forming holes, without any attachment confirming to Fe-290 Gde E-165.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Supply and fixing Pre-Painted galvatume aluminum zinc coating GI based Corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws as specied.

Material and labour for cement concrete 1:3:6 type C2(using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

Material and labour for cement concrete 1:2:4 type B1(using 20 mm graded crushed stone aggregate) as in benching in manhole & coping finished even and smooth with using extra cement complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block type C1 1:3:6 (20mm graded aggregate )masonry with solid blocks, exc 10 cm in width and setting, in mortar, complete in CM 1:4 all as specified.

Material and labour for rendering 15mm thick in cement mortar (1:4) on brick or concrete surface wall and finished the surface even and smooth without using extra cement to plastering complete all specified and directed.

Supply and fixing 150mm dia internal stoneware salt glazed drain pipe grade ‘A’ laid in trenches and jointed with cement mortar 1:1 etc. complete all as specified.

Material and labour for concrete bed to drain pipe including packing under and hunching against the side of drain pipe after laid and tested in PCC 1:3:6 type C-2 for 150mm dia and all as specified and directed by EIC.

Material and labour for Pre-cast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate set in cement mortar 1:4 as in cover slab including all necessary form work. Exposed surfaces of concrete shall be finished even and smooth without using extra cement. (Note : Reinforcement shall be measured and paid separately under relevant items of this schedule.

TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking, hooking ends etc, and binding with and including mild steel wire (annealed) not less than 0.90 mm dia.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitered / stopped ends.

Supply and fixing in repair Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' of size 180 X 150mm jointed with CM 1:4 and set in cement concrete type B1 (1:2:4) and all as specified and directed.

Supply and fixing cast iron grade FG-150 articles exc 5 Kg each as in gully trap brackets, gratings, stop valve, gate stops of any description all as directed.

Material and labour for Construction of Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber screen chamber Brick work in CM, RCC cover slab in M-25/RR masonry/Filling with brick bats, complete of size 1.20 M dia X 3.0M deep. (Ref CEAF/BLR/ TD Drg No AFB/ TD ) 125 Sheet No1/2 dated 07 .08.1999 and amt 21 .11.1999

Supply and fixing GI snap grid frame (powder coated) work for false ceiling 605mmx605mm T angle 1.5mm thick complete all as specified.

Material and labour for Hangers 4 to 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners12.5mm dia. 40mm long complete all as specified

Material and labour for providing and fixing pre- painted Gypsum board/tiles 9/12 mm thick in ceiling insulation and acoustic purposes, 600 x 600 mm in size, fixed with screws to aluminium frame work or with staples on snap grid in ceiling and as per manufacturers instructions.

Dismantling structural steel work including doors, gates but excluding framed truss etc. and all as specified and directed.

Supply and fixing Steel rolling shutters, thickness of lath 1.25mm without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box and crank handle and all as specified and directed.

Supply and fixing Safety lever locks mild steel with 4 levers for rolling shutters and all as specified and directed.

Supply and fixing Ball bearing for rolling shutters and all as specified and directed.

Material and labour for providing two coats of synthetic enamel paint over a coat of red oxide primer on steel Surfaces of any description, over 10cm in width or girth,not otherwise described and all as spfd and directed.

Dismantling Structural steel work including doors, gates but excluding framed truss etc.

Fixing only Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work and roller for gate con- forming to Fe.290.Gde-E-165

Material and labour for preparation old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and direted.

Material and labour for PCC Type B1 1:2:4 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, bond stones and the like including weathering, slightly r

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement.

Material and labour 20mm thick Granite (of any type) tiles machine cut , in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

Supply and fixing Mild steel , plain blak sheet 1mm thickness of sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required.

Demolition of Cement concrete (unreinforced) in ground floor and pavings not exc. 15 cm thickness (below or above GL).

Material and labour for 100 mm thick PCC 1:2:4 type B-1(using 20 mm graded mechanically crushed stone aggregate )as in flooring finished even and smooth without using extra cement

Material and labour 50mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate)

Material and labour for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4

Material and labour for Cement concrete chequered pre polished any coloured tiles 30cm x 30xm x25 mm thick, machine pressed; set, jointed and pointed in net coloured pigment in floors,

Material and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm concecled in wall / surface including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm for One socket out let 5 Amps 5 pin on independent board complete all as specified and directed by Engr-in-Charge.

Material and labour for point wiring using approved colour code as per IS (Red, Black and Green for single phase circuits) with multistrand copper conductor 1.5 Sqmm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI marked with valid CM/L No. drawn in surface stove enemelled steel conduit, including PVC insulated multi-stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continiuty conductor to common earth and connecting to earth dolly complete all as specified and as directed at site for flame proof LED light fitting controlled by one flame proof rotary switches.

All as per item No 61 here in before but with cable size 2.5 Sqmm for one 3/5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm all as specified and directed by Engr-in-Charge.

Material and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm on surface including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed. (Note : Cost of for cutting chesing and making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate.(a) One light point controlled by one switch one way 5 Amps

All as per item No 63 above but one switch socket combination 15 Amps independent with cable 2.5 Sqmm size and earth wire to be same for phase wire

Supply and fixing switch socket combination outlet 2in1, 3 pin 5 Amps flush type

Supply and fixing switch socket combination outlet 2in1, 3 pin 15 Amps flush type

Material and labour for Sub main wiring with 2 Run of 2.5 Sqmm cable and one run of 1.5 sqmm PVC insulated, unsheathed FRLS cable of multistranded copper conductors 1100 volt grade IS- 694 marked drawn through and including non metalic PVC conduit pipe medium grade ISI marked (not less than 20 mm dia) along with fittings and accessories concealed on wall and surface on ceiling complete all as specified and directed by Engineer in charge.

Supply and fixing down lighter 2'X2' 35 Watt

Supply and fixing Earth continiuty conductor or main earthing lead fixed on wall on batten or recess or chases or buired in ground or drawn in conduit / pipe or fixed to pole or any other indicated suituation for loop earthing etc, as required for copper strip 32 mm x 6 mm with proper saddles/spacer, screw etc., complete all as specified and as directed.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable(heavy duty) 1100 volts grade with stranded aluminium conductor of size 2 c x 16 Sqmm including taking down.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable(heavy duty) 1100 volts grade with stranded aluminium conductor of size 2 c x 10 Sqmm including taking down.

Material and labour for light grade GI pipe 50 mm dia for cable protection.

Cutting PCC/ road 100mm thick for laying of LT UG cable.

Material and labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregate for 100mm thick for making good of road finished fair & even.

Supply and filling dry river sand in trenches including spreading for cushioning of LT UG cablec and punning down complete all as speified and directed by Engr-in-charge. Note : Punned down thickness shall be measured and paid seperatly

Material and labour for well burnt as class ‘B’ bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trench complete all as speified and directed by Engr-in-charge.

Material and labour for SMC / FRP box of size inside dimension 255 x 200 x 100 mm to accumulate 8 mm thick bakelite sheet,MCB 6 Amps-01 No,Switch Combined Socket 5/15 Amps with gang box-01 No mounted on the fabricated MS Angles of size 40 x 40 x 6 mm with two coats of synthetic paint over a coat of redoxide primer, mounting at height of 60 cm from ground level including necessary PCC foundation for angle,suitable connectors for incoming and outgoing of 2 X 16 sq.mm UG cable,bolts,nuts,washers,gland for cable,connecting the cable with suitable lug and inter connecting the socket with suitable wire all as specified and as directed by Engr-in-Charge.Make : Sintex / Equivalent .Note: The rate deemed to be including Excavation, Removal, Refilling,PCC foundation for mounting the MS Angles.

Material and labour for earthing complete with galvanized steel earth plate electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5M below normal ground level connected to GI earth lead wire 4.0mmdia by means of nuts, bolts, check nuts and washer of GI steel and connecting to testing point including provision of test point and all as shown in electrical plate No. 3 of SSR Pt I. The work is inclusive of necessary earth work and PCC chamber in type CI (1:2:4) with 8 CTD bar reinforcement both ways at 140 mm bents to centre complete all as directed by Engr-in-Charge.

Supply and installation of solar water heating system flat plate collector type with heat exchanger of 100 ltrs per day capacity with electrical heating b ack up

Supply and fixing in repair for 25 mm bore galvanised steel water tubing medium grade with all fitting fixed to wall and ceiling or laid in floors complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 ltrs hoisted and fixed in position all as specified in SSR Part I

Material and labour for rising platform for fixing water tank at roof and as specified and directed by Engr In charge

Supply and fixing gun metal globe / gate valve, globe conforming to IS 9338 with iron wheel heads ,screwed both ends complete of size 25mm, (1”) dia pipe complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia.

Supply and fixing Switch socket combination 2 in 1, 5 A flush type universal complete all as specified and directed.

Supply and fixing wall mounted fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and directed.

Supply and fix steel tubular swaged poles complete with CI base plate, final taper plug, bolts, nuts & screws as specrified type 410 SP-64 (12 meter long) all as specified and as directed.

Supply and fixing in single pointed Aluminium franklin rod/Air Termination rod of 12mm dia 300 mm long fixed to aluminium strip including drilling holes, nuts, bolts washers, Insulating mounting pads for resting/ supporting of air terminals etc. complete all as directed.

Supply and fix Aluminium strip 32 X 6 mm burried in ground connected to test point by means of bolts, nuts, check nuts and washers of galvanised iron at each joints between strip including saddle/Ceramic insulator/PCC block where required. all as directed by Engineer-in-Charge.

Supply and fixing in test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm longhex. head screw all as specified and directed by Engineer - in - Charge

Supply and fixing for 15 mm bore galvanised steel water tubing medium grade with all fitting laid in trenches including taking down old GI pipe complete all as specified.

Cutting the existing GI pipe of any size for tapping or new connection with 25 mm including required fitting all as directed.

Supply only Bib Tap of 15 mm dia standard of PTMT any colour high pressure screwed for iron pipe (Minimum weight 125 gms ) all as specifed and directed. Make Prayag, Princes, Supreme

.Earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers connected to and including GI earth strip 32 x 3 mm size upto 7.5 mtr by means of bolts, nuts, check nuts and washers, and protected by light grade 40 mm dia and connected to pole and GI pipe medium grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c and PCC chamber pit with P C C 1:2:4 Type C2 (including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 metre and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009

Supply and fixing of iron plate as earth pit indetifier board as per standerd size and specification, scheme of various type of size(Rectangular/Tringle/Square/Oval) 300 x 300 x 3.15 mm thick and angle iron for stand 04 feet height including all frame work,welding,cutting and painting the board as per direction of Air HQ colour code and writing the letters such as connected eqpt,type of earthing,resistence value,date of installation,date of check including of PCC works for fixing of earth sign board at the site of various location all as specified and directed.

Supply and fix CMRI certified LED Flame proof 2x20W LED Tube light fixture. Make : CG FIAMMA II. CAT Ref EXTN2LT8-16/20

Supply and fixing switch flame proof rotary type with termination box in LM6. 16A, single pole 250 Volts

Material and labour for XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 2 core 6 Sqmm, 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheather laying in trenches/cable ducts, fixed to wall/pole complete all as specified and directed.

Supply and fixing switch piano flush type single pole one way 5 Amps complete all as specified and directed.

Supply and fixing Switch socket combination 2 in 1, 5 A flush type universal complete all as specified and directed.

Supply and fixing switch socket combination multi purpose 5 Amp /16 Amps, 5 in1, flush type complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm complete all as specified and directed.

Supply and fixing High quality aluminium extruded with decorative end caps 10 Watt Glazes LED Batten. Code No. LGLZ01X010xC, 6500(K) . Make : jaguar

Supply and fixing High quality aluminium extruded with decorative end caps 10 Watt Glazes LED Batten. Code No. LGLZ01X020xC, 6500(K) . Make : jaguar

Boring holes under road, pavement hard standing by trenchless technology using ultra sound technique and necessary machine includings HDPE pipes of 100 mm dia suitable for 0.4 Mpa working pressure complete all as speified and directed.

Supply and fixing LED post top made in cast aluminium with decorative opal polycarbonate di user with IP 65 protection incl suitable size & length of GI pipe for mounting including suitable cable junction box having with connectors for in & out purpose and MCB control and making all neccessary connections with suitable size of cable not less than 2.5 sqmm from junction box to fitting complete all as specified all as directed. Make : Bajaj, Cat No : BGCL 40W LED WH or equivalent in Havells/CG Note : The Quoted rate is deemed to be included for Junction Box with MCB & connectors, PVC copper connecting items.

Supply and fixing LED post top lantfern light fitting of 40 watt capacity made in cast aluminium spigot housing with decorative opal acrylic difuser and IP 65 protection icl GI pipe of suitable length & size with necessary accessories, nuts, bolts, washers complete all as specified and directed. Make : CG Cat No : LPTO-40 CDL or equivalent in Bajaj/Havells. Note for items No 106 & 107 : The Quoted rate is deemed to be included for Junction Box with MCB & connectors, PVC copper connecting items.

SREE BUILDERS

Maruthi constructions