8848/GWL/E8 SPECIAL REPAIR TO BLDG NO T-13 AND PROVN OF ADDL/ALTN TO KITCHEN IN BLDG NO P-04 UNDER AGE B/R-I AT MORAR CANTT GWALIOR

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for Formwork to sides and soffits flat or curved of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed

M&L, Formwork to soffits of roof slab and chajjas etc thickness not exc 200mm thick complete all as specified and directed.

M&L for reinforced cement concrete (1:2:4) type B-0 ( using 12.5 mm graded stone aggregate ) as in beams , cantilevers bressummers , lintel over 1.5 m span etc. complete all as specified and directed.

M&L for mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars 5 mm and over upto and including 10 mm dia , as in stirrups , spacers , and binders , cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Dismantling stone slab, stone beams and type of any description or thickness laid bedded and pointed in any mortar in roof,floor etc. complete all as specified and directed.

M&L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection incl finishing the surface even and smooth w/o using extra cement all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchh over and including 15 mm thick screed bed in CM 1:6 as in floors.

All as per item No. 10 but tiles in vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick screed bed in CM 1:4 .

M&L, hard core of for broken stone boulder of gage n.exc 63mm deposited, spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces.

M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),75 mm thick, as in sub base for floor, finished even and rough complete all as specified and directed.

M&L cement concrete (1:2:4) Type B0 using 12.5 mm graded stone agg as levelling course/mass concrete/edge of pathway etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F for of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 290,Gde E-165 complete all as specified and as directed .

Dismantling of asbestos cement (corrugated, semi-corrugated) ect sheets in roof covering including ridges etc complete all as specified and directed.

S&F, Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F 0.50 mm thick pre -painted galvaltume aluminium zinc coating GI based steel sheet of an colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as in ridge specified.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L, 15mm thick rendering on brick or stone/concrete any surfaces in cement mortar 1: 4 on mixed with WPC @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured & paid seperately.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces in cement mortar (1:6) and surface finished even and smooth, complete all as specified and directed

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

M&L Dismantling of AC ceiling board any descrition complete all as specified and directed.

S&F for, anodised aluminium snap grid frame work for false ceiling consists of powder coated aluminium angle 22x22x1.3 mm and Tee 35x25x1.3 mm of size and grid 600x600 mm with Hangers 3-4 mm dia. G.I. (upto reqd length) adjusting level fixed to roof slabs by means of ceilling cleats complete all as specifed and directed

M&L, 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium anodised frame and hanges framework fixed complete all as specifed and directed

Taking down Chowkats or frames not exceeding 1.5 sqm each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

S & F Anodised aluminium frame for doors , windows , ventilators with one or more rebates including jointing cleat for fixing etc.

S & F anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, handles two numbers in each door, 100mm long brass hinges, 150mm long aluminium tower bolts, anodised aluminium snap beading screws etc including M&L for fixing floor machene and godrej lock in each door complete.

S & F 5 mm thick tinted glass for aluminium door /windows all as specifed and directed.

S&F for 150 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F, for alluminium door closer hydraulically regulated,designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F for Butt hinges, Medium Weight, cold rolled mild steel, and fixed 100 mm complete all as specified and directed.

S&F for Aluminium handles, cast type anodised of Size 125mm complete all as specified and directed.

S&F for 100 mm long aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 300 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet , cast or extruded sections or cast aluminium alloy complete all as specified and directed.

S&F for 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F for curtain rod of Stainless steel 23-25 mm dia pipe thickness not less than 0.8mm of pipe with fixing bracket, side nobes etc fixed on walls with screws with PVC rawl plugs etc complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built incement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L brick work with sub class `B' bricks, straight or curved on plan exceeding 6m mean radius(except bricks), built in cement mortar 1:6 complete all as specified and directed. (Note :- old bricks may be obtained from demolition of brick work).

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

Cutting out cracks to V section in existing walls, roffing or trace, cleaning out wetting grouting with cement and sand slurry 1:3 complete all as specified and directed.

S & F chicken wiremess with tack screws of galvanised mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F for Stainless Steel Peg Set of 6 hooks ISI marked medium weight complete all as specified and directed.

S&F for flat iron 50x5mm thick wind ties fixed to CGI sheets on roof including or necessary drilling, bolting or riveting etc confirming to Fe- 290 grade E-165 complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (Using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L 60 mm thickness machine pressed precast concrete interlocking paver block M-35 any shape and size confirming to IS 15658-2006 in grey cement glossy finish rubber mould casted laid dry over sand cushioning complete all as specified and directed.

Preparation old surfaces of wall including, complete removal of existing treatment , and applying wall putty on walls and applying two coat oil emulsion over a coat of primer complete all as specified and directed.

Preparation of new plaster surfaces of wall, applying wall putty on walls and applying two coat of oil emulsion over a coat of primer complete all as specified and directed.

M&L for Preparing of old or new decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L for applying two coat of cement base paint including watering and curing of surface adeqautely before and after application of cement base paint complete all as specified and as directed.

M & L for applying two coat of synthetic enamel paint subsequent coat on new steel surfaces (previously decorated) for grills, guard bars, shutter etc including preparation of surfaces and including and over one coat of red oxide complete all as specified and directed.

S&F PVC Grating Square 100 mm with hinge (openable) complete all as specified and directed .

S&F in repair 75 mm dia PVC (SWR ) pipes single socketed in any length with rubber ring joints laid in floor and wall with necessary clamp complete all as specified and directed

S&F in repair 110 mm dia PVC (SWR ) pipes single socketed in any length with rubber ring joints laid in floor and wall with necessary clamp complete all as specified and directed

S&F, PVC (SWR) bends any radius, 75 mm bore, provided with access door complete all as specified and directed

S&F, PVC (SWR) bends any radius, 110 mm bore, provided with access door complete all as specified and directed

S&F solid PVC doors frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawing as specified in clause 8B-1 to 8-B-10 on page 133 to 138 and page 146 to 153 of SSR -2004 part-II complete all as specified and as directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC`C` channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles ad plain colour PVC sheet for top rail, lock rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame complete all as specified

Dismantling of water tank exc 250 ltrs and n. exc 500 ltrs capacity and removing from site complete all as specified and directed.

S&F,500 ltr capacity rotational moulded polythene water storage tank two layers ISI Marked (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed.

Taking up or down 15 mm dia steel water tubing and connections including cleaning for refixing if required or removal from site complete all as specified and directed.

Taking up or down 20 mm dia steel water tubing and connections including cleaning for refixing if required or removal from site complete all as specified and directed.

S&F, 15mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified

S&F, 20 mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified

S &F tublar towel rail 20mm dia D type 60 cm long between flange brass chromium plated complete all as specified & directed.

S&F PVC connection of 450 mm length in repair complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F, 75 mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F, 110mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe of 20mm bore of brass ferrule complete all as specified and directed

S&F bib taps fency type 15 mm caste copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe and fixed complete all as specified and directed.

S&F stop cock fency type 15 mm caste copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe and fixed complete all as specified and directed.

M&L PVC floor trap ,plain with grating including jointing to waste pipe with solvent cement dia of outlet 75mm in repairs complete all as specified and directed.

S&F in repairs pillar taps caste copper alloy ,with capstan heads chromium plated screwed down high pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F for Box type steel windows with side hung shutters (double shutters for glass and gauze) jointed together with and including grills using 12mm square bars @ 10cm C/C as per TD No CEBZ/TD /14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and as directed. Note:- Glass/gauge shall be measured and paid separately under respective item as suply and fix complete all as specified and as directed.

S&F in repair waste fitting for wash basins and sinks with inlet and outlet, screwed for pipe or connections, and with one cleaning cap, 32mm bore complete all as specified and directed.

S&F, in repair 32 mm bore PVC waste pipe and 65 cm long flexible complete all as specified and directed.

S & F in repairs grating doom 100mm dia of PTMT/Chromium plated (Minimum weight 25gms to Nahani traps ect complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400mm excluding taps waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.

M&L for cement concrete bed 1:4:8 type D2 to 150 mm dia drain pipes including forming cradles; in complete all as specified and directed.

M&L for 150 mm dia internal bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified specified and directed.

M&L for construction of septic tank including excavation, in any type of soil, foundation in PCC 1:2:4 type B-2, brick work in cement mortar 1:4, RCC Nominal Mix type B-1 1:2:4 (using 20 mm graded stone aggregate) with and including reinforcement work, slab cover including RCC precast cover slab having 6 mm plate embedded all around with angle iron frame, vent pipe shaft and sludge chamber etc complete for 25 users complete all as specified and shown in dwawing No. CEBZ/TD/76/2011 Sht No 1/2 to 2/2 .

M&L for construction of soakage well including excavation, in any type of soil, foundation in PCC 1:3:6, wells of honey combed brick work in CM 1:4 and solid in RCC Nominal Mix type B-1 1:2:4 (using 20 mm graded stone aggregate) with and including reinforcement work including intercepting chamber, screen chamber brick work in CM 1:4, RCC cover slab in nominal mix type B-1 1:2:4 , filling with brick bats, complete of size 1.80 m in dia and 3.00 m in deep (effective depth) all as specified and shown in dwawing No. CEBZ/TD/78/2011 Sht No 1/2 to 2/2 .

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 for laying floor finishes complete all as specified and directed

M & L for machine cut Kota stone slab 18 to 20 mm thick and min size of kota stone shall be 550x550 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing ect over and including 20mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in cement plaster 1:4 on the other side of lathing and pointed in white or coloured cement to match complete all as specified and as directed.

M & L for 18 to 20mm thick granite tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing ect over and including 20mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class "B" bricks straight or curved on plan to any radius in half brick thick wall built in cement morart 1:4 complete all as specified and as directed.

M & L for two coat of oil bound distemper over a coat of Birla wall care putty on new plastered surfaces on wall incl. preparation of surfaces complete all as specified and directed. .

S&F pressed steel frame 105mmx60mm for doors with one or more rebates including necessary fixing lungs and hinges, lock strike plate,etc complete all as specified and directed

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed all as specified and as directed

S&F aluminum handles cast type, anodized of 100 mm size complete all as specified and directed.

S&F 3mm thick Sheet Glass ordinary qulity and glazing with oil putty in square n.exc 0.5 sqm in each pane complete.

S&F figured glass, pin head type 4 mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane complete.

M&L Reinforced Cement Concrete (Nominal Mix) Type B1 1:2:4 (12.5mm agg) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for Precast Reinforced cement concrete type B0, 1:2:4 (12.5mm graded aggregate) in door and windows frames, any size, single or doubled rebated, including arrangements for fixing of hinges and fixtures complete all as specified and as directed.

M&L for mild steel TMT bars 06 mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.

M&L for applying two coats of exterior emulsion paint new plaster surfaces,white or tinted on wall and including one coats white care putty to achive even and fair surfaces complete all as specified and directed .

M & L for prepartion of new steel surfaces ,exc. 10 cm width or girth and applying two coat synthetic enamel paint over one coat of red oxide primewr etc complete all as specified.

S&F rotation moulded polyethylene water storage tank capacity 1000 ltr (cylindrical vertical with closed top ) double layer construction , ISI marked , hoisted and fixed in position including dismantling of old tank and removing to from site complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L, rolled mild steel in joist, channel, angle, tee sections fixed independently without connecting plate etc of Fe-410W (Gde-250) quality 'A' complete all as specified and as directed.

M & L for 18 to 19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S & F in 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F, in repair sinks with drainage borard made of stainless steel 1mm thick kitchen or laboratory with plug washer and waste coupling including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connection to pipe over all size 915mm x460 mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F Pillar Tap Swan Neck complete all as specified and directed by Engr in Charge

S&F tube Medium' grade galvanised with all fitting laid in trenches, of 50 mm dia complete all as specified and directed.

S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 50 mm dia complete all as directed.

S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 20 mm dia complete all as directed.

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down ceiling fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed by Engr-in-charge.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

Taking down unserviceable TPN DB with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia confirming to IS 14930 (Part-I) 2001, with all fitting and fixing accessories and 1.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete for the following:-

One light point controlled by one switch.

One fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

All as per item No. 123 here in before but point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.

S&F switch piano, PVC/Polycarbonate, flush button single pole one way 5 Amp complete all as specified and directed.

S&F socket out let, multipurpose, PVC/Polycarbonate, 2 in 1 5 pin, 5 Amp complete all as specified and directed.

S&F switch piano, PVC/Polycarbonate, flush button single pole one way 15 Amp complete all as specified and directed.

S&F socket out let multipurpose PVC/Polycarbonate, flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed.

S&F ceiling rose, PVC/Polycarbonate, surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F electronic step rotary type fan regulator PVC/Polycarbonate, of two module capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete.

S&F LED Lamp 09/10 watt complete.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.

Supply & fix BEE 5 star rating energy efficient ceiling fans 1400 mm sweep with minimum air delivery 210 cum/min, down rod all accessories required including regd length of 3 core 1.0 sqmm PVC multistranded copper conductor cable 1100 volts grade from ceiling rose to PVC connector for ceiling fanelectric connection and testing complete all as specified and directed.

Supply & fix Exhaust fans 380 mm sweep with double bearing incl all fixing accessories required including making hole & regd length of 3 core 1.0 sqmm PVC multistranded copper conductor, and testing complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia confirming to IS 14930 (Part-I) 2001, with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

S&F sheet metal enclosure double door distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 63 Amp,4 pole & Including MCCB 63 amps 4 pole 16 KA complete. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site.

S&F MCB DB, sheet metal enclosures double door SPN 12 way with rated bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 240 volts, 6 to 40 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

S&F, MCB SP 240 volts, 63 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area 35 Sqmm 3.5 Core complete all as specified and directed.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.

Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete.

S&F tube 'Light' grade galvanised Pipe of 50 mm dia with all fitting for cable protection, laid in trenches, fixed to wall and floor by MS shaddle & fixed with pole, 02 position by MS clamp made of 40x5 mm MS flat, complete all as specified and directed.

Supply & fix Exhaust fans 300 mm sweep with double bearing & all fixing accessories required including making hole & regd length of 3 core 1.0 sqmm PVC multistranded copper conductor, and testing complete all as specified and directed.

Supply & fixing water heater storage type metallic outer body and stainless steel inner container, 25 Ltrs capacity, electric suitable for single phase, 50 Hz, AC Supply, 5 star rating, including all necessary fittings and fixture with minimum 1M of three core 2.5 sqmm twisted copper conductor cable PVC sheated, three pin plug top complete with necessary fittings and fixtures all as specified and directed.

S&F Sheet metal enclosures single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20 amps, 240 volts, 10 KA complete all as specified and directed.

S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.

M.S. ENGINEERS

Arkay Instrumentation

BHAGIRATH CONSTRUCTION COMPANY

Babatia super works

M/s Ratan Lal Jain and Co.

M/S SANJAY AGARWAL

M/s. Varinder Kumar Sharma

M/s KGN Builders

M/s Subhash Construction Co.

M/S NIRMAL SINGH DHANJAL

M/s J.B. Construction